A model for resin flow during composite processing: Part 1—general mathematical development

A generalized three-dimensional model for resin flow during composite processing has been developed. The model is based on a theory of consolidation and flow through a porous medium, which considers that the total force acting on a porous medium is countered by the sum of the opposing forces, including the force due to the spring-like effect of the fiber network and the hydrostatic force due to the pressure of the liquid within the porous medium. The flow in the laminate is described in terms of Darcy's Law for flow in a porous medium, which requires a knowledge of the fiber network permeability and the viscosity of the flowing fluid. Unlike previous resin flow models, this model properly considers the flows in different directions to be coupled and provides a unified approach in arriving at the solution. Comparison of numerical solutions with the closed form analytical solution shows good agreement. Resin pressure profiles show that the pressure gradients in the vertical and horizontal directions are not linear, unlike the assumption of linearity made in several previous resin flow models. The effects on the resin pressure of both linear and nonlinear stress-strain behavior of the porous fiber network were considered. The nonlinear behavior simulates a rapidly stiffening spring and the resin pressure decreases much more rapidly after a given initial period compared to the linear stress-strain behavior.

[1]  G. Heinrich,et al.  Theorie dreidimensionaler SetzungsvorgÄnge in Tonschichten , 1961 .

[2]  J. G. Williams,et al.  Liquid flow through aligned fiber beds , 1974 .

[3]  J. J. Douglas.  Alternating direction methods for three space variables , 1962 .

[4]  G. Springer,et al.  Curing of Epoxy Matrix Composites , 1983 .

[5]  M. Biot.  THEORY OF ELASTICITY AND CONSOLIDATION FOR A POROUS ANISOTROPIC SOLID , 1955 .

[6]  John Happel,et al.  Viscous flow relative to arrays of cylinders , 1959 .

[7]  Y. Tajima,et al.  Thermokinetic modeling of an epoxy resin I. Chemoviscosity , 1983 .

[8]  Donald W. Taylor,et al.  Fundamentals of soil mechanics , 1948 .

[9]  M. B. Roller.  Characterization of the time-temperature-viscosity behavior of curing B-staged epoxy resin , 1975 .

[10]  C. Cryer,et al.  A COMPARISON OF THE THREE-DIMENSIONAL CONSOLIDATION THEORIES OF BIOT AND TERZAGHI , 1963 .

[11]  M. Biot.  General Theory of Three‐Dimensional Consolidation , 1941 .

[12]  J. Douglas,et al.  A general formulation of alternating direction methods , 1964 .

[13]  S. Huang,et al.  Copolymer composition as a function of molecular weight for poly(styrene-methyl methacrylate) initiated by ethylaluminum sesquichloride , 1983 .

[14]  J. Bear.  Hydraulics of Groundwater , 1979 .

[15]  S. Kuwabara,et al.  The Forces experienced by Randomly Distributed Parallel Circular Cylinders or Spheres in a Viscous Flow at Small Reynolds Numbers , 1959 .

[16]  P. L. T. Brian,et al.  A finite‐difference method of high‐order accuracy for the solution of three‐dimensional transient heat conduction problems , 1961 .

[17]  J. Masliyah,et al.  Flow perpendicular to mats of randomly arranged cylindrical fibers (importance of cell models) , 1975 .

[18]  George S. Springer,et al.  Heat of Reaction, Degree of Cure, and Viscosity of Hercules 3501-6 Resin , 1982 .

[19]  F. Dullien,et al.  Single phase flow through porous media and pore structure , 1975 .

[20]  M. Biot.  THEORY OF DEFORMATION OF A POROUS VISCOELASTIC ANISOTROPIC SOLID , 1956 .

[21]  K. Terzaghi.  Theoretical Soil Mechanics , 1943 .

[22]  G. P. Raymond,et al.  A Non-Linear Theory of Consolidation , 1965 .

[23]  Allen J. Barduhn,et al.  Anisotropic Permeability in Porous Media , 1970 .