Micro-cantilever testing of diamond - silicon carbide interfaces in silicon carbide bonded diamond materials produced by reactive silicon infiltration

[1]  J. Ligda,et al.  A Multi-Scale Approach for Phase Field Modeling of Ultra-Hard Ceramic Composites , 2021, Materials.

[2]  Zaoli Zhang,et al.  Fracture properties of thin film TiN at elevated temperatures , 2020, Materials & Design.

[3]  M. Herrmann,et al.  Oxidation behaviour of silicon carbide bonded diamond materials , 2020 .

[4]  M. Herrmann,et al.  Determination of bulk residual stresses in superhard diamond-SiC materials , 2020 .

[5]  P. Klimczyk,et al.  Phase stability and mechanical properties of Al2O3-cBN composites prepared via spark plasma sintering , 2020 .

[6]  C. Ni,et al.  Interfacial zone surrounding the diamond in reaction bonded diamond/SiC composites: Interphase structure and formation mechanism , 2019 .

[7]  T. Laoui,et al.  Tribological behaviour of alumina-based nanocomposites reinforced with uncoated and Ni-coated cubic boron nitride , 2019, Journal of Materials Research and Technology.

[8]  C. Ni,et al.  In-situ measurement of SiC/Si interfacial tensile strength of reaction bonded SiC/Si composite , 2019, Composites Part B: Engineering.

[9]  M. Göken,et al.  A review of experimental approaches to fracture toughness evaluation at the micro-scale , 2019, Materials & Design.

[10]  Sedlák,et al.  Small-Scale Mechanical Testing of Cemented Carbides from the Micro- to the Nano-Level: A Review , 2019, Metals.

[11]  J. Wehrs,et al.  High temperature fracture toughness of ceramic coatings evaluated using micro-pillar splitting , 2019, Scripta Materialia.

[12]  T. Scott The influence of microstructure on the mechanical properties of polycrystalline diamond: A literature review , 2018 .

[13]  M. Herrmann,et al.  Wear behavior of diamond-silicon nitride composites sintered with FAST/SPS , 2018 .

[14]  M. Herrmann,et al.  On the Stability of c-BN-Reinforcing Particles in Ceramic Matrix Materials , 2018, Materials.

[15]  T. Laoui,et al.  Investigation of the structural and mechanical properties of micro-/nano-sized Al2O3 and cBN composites prepared by spark plasma sintering , 2017 .

[16]  M. Herrmann,et al.  SiC-bonded diamond materials produced by pressureless silicon infiltration , 2017 .

[17]  M. Herrmann,et al.  Microstructural investigation of diamond-SiC composites produced by pressureless silicon infiltration , 2017 .

[18]  J. Michler,et al.  Small-scale fracture toughness of ceramic thin films: the effects of specimen geometry, ion beam notching and high temperature on chromium nitride toughness evaluation , 2016 .

[19]  G. Pharr,et al.  Measurement of fracture toughness by nanoindentation methods: Recent advances and future challenges , 2015 .

[20]  Lai-fei Cheng,et al.  Microstructure and properties of diamond/SiC composites prepared by tape-casting and chemical vapor infiltration process , 2014 .

[21]  M. Göken,et al.  Microcantilever bending experiments in NiAl — Evaluation, size effects, and crack tip plasticity , 2014 .

[22]  M. Herrmann,et al.  cBN reinforced Y-α-SiAlON composites , 2013 .

[23]  H. Hu,et al.  Fabrication of diamond/SiC composites by Si-vapor vacuum reactive infiltration , 2013 .

[24]  Cong-Xu Zhu,et al.  Preparation of Si–diamond–SiC composites by in-situ reactive sintering and their thermal properties , 2012 .

[25]  M. Herrmann,et al.  Diamond-ceramics composites—New materials for a wide range of challenging applications , 2012 .

[26]  H. Höppel,et al.  Nanoindentation strain-rate jump tests for determining the local strain-rate sensitivity in nanocrystalline Ni and ultrafine-grained Al , 2011 .

[27]  T. Detzel,et al.  Interface fracture properties of thin films studied by using the micro-cantilever deflection technique , 2009 .

[28]  M. Herrmann,et al.  The development of a diamond-silicon carbide composite material , 2009 .

[29]  B. Derby,et al.  Thermal stress induced microcracking in alumina–20% SiCp composites , 2004 .

[30]  T. Ekstrom,et al.  Low-Pressure Fabrication of Diamond–SiC–Si Composites , 2001 .

[31]  J. Angus,et al.  Graphitization Effects on Diamond Surfaces and the Diamond/Graphite Interface , 1996 .

[32]  R. Davidge,et al.  The strength of two-phase ceramic/glass materials , 1968 .

[33]  R. Raghavan,et al.  Overview on micro- and nanomechanical testing: New insights in interface plasticity and fracture at small length scales , 2018 .

[34]  T. Goto,et al.  Densification, microstructure and mechanical properties of SiO2–cBN composites by spark plasma sintering , 2012 .

[35]  O. Fukunaga The equilibrium phase boundary between hexagonal and cubic boron nitride , 2000 .