Consensus stability testing protocols for organic photovoltaic materials and devices

Procedures for testing organic solar cell devices and modules with respect to stability and operational lifetime are described. The descriptions represent a consensus of the discussion and conclusions reached during the first 3 years of the international summit on OPV stability (ISOS). The procedures include directions for shelf life testing, outdoor testing, laboratory weathering testing and thermal cycling testing, as well as guidelines for reporting data. These procedures are not meant to be qualification tests, but rather generally agreed test conditions and practices to allow ready comparison between laboratories and to help improving the reliability of reported values. Failure mechanisms and detailed degradation mechanisms are not covered in this report.

[1]  James Edward Pickett,et al.  Effects of irradiation conditions on the weathering of engineering thermoplastics , 2008 .

[2]  N. R. Sorensen,et al.  The effect of metal foil tape degradation on the long-term reliability of PV modules , 2009, 2009 34th IEEE Photovoltaic Specialists Conference (PVSC).

[3]  A. Delahoy,et al.  A laboratory technique for the evaluation of electrochemical transparent conductive oxide delamination from glass substrates , 2003 .

[4]  Rakesh Radhakrishnan,et al.  Thermal Stress Analysis/Life Prediction of Concentrating Photovoltaic Module , 2008 .

[5]  Mikkel Jørgensen,et al.  A self‐calibrating led‐based solar test platform , 2011 .

[6]  D. R. Bauer Interpreting weathering acceleration factors for automotive coatings using exposure models , 2000 .

[7]  T. J. McMahon Accelerated testing and failure of thin‐film PV modules , 2004 .

[8]  Andrew G. Glen,et al.  APPL , 2001 .

[9]  K. Araki,et al.  Development of concentrator modules with dome‐shaped Fresnel lenses and triple‐junction concentrator cells , 2005 .

[10]  Gang Li,et al.  Accurate Measurement and Characterization of Organic Solar Cells , 2006 .

[11]  Suren A. Gevorgyan,et al.  A setup for studying stability and degradation of polymer solar cells , 2008 .

[12]  Carole Sentein,et al.  Accelerated lifetime measurements of P3HT:PCBM solar cells , 2006 .

[13]  J. Miller,et al.  Long Term Reliability of Photovoltaic Modules , 2006, 2006 IEEE 4th World Conference on Photovoltaic Energy Conference.

[14]  John R. Reynolds,et al.  A round robin study of flexible large-area roll-to-roll processed polymer solar cell modules , 2009 .

[15]  J. A. del Cueto,et al.  Electrochemical corrosion of SnO2:F transparent conducting layers in thin-film photovoltaic modules , 2003 .

[16]  Jacques Lemaire,et al.  Mechanisms of Photooxidation of Polyolefins: Prediction of Lifetime in Weathering Conditions , 1996 .

[17]  Christoph J. Brabec,et al.  Characterization of Organic Solar Cells: the Importance of Device Layout , 2007 .

[18]  F. Krebs,et al.  Stability/degradation of polymer solar cells , 2008 .

[19]  O. Haillant,et al.  An Arrhenius approach to estimating organic photovoltaic module weathering acceleration factors , 2011 .

[20]  D. L. King,et al.  Commonly observed degradation in field-aged photovoltaic modules , 2002, Conference Record of the Twenty-Ninth IEEE Photovoltaic Specialists Conference, 2002..

[21]  Christoph J. Brabec,et al.  Determination of the degradation constant of bulk heterojunction solar cells by accelerated lifetime measurements , 2004 .

[22]  David R. Bauer,et al.  Perspectives on weatherability testing of automotive coatings , 2002 .

[23]  Suren A. Gevorgyan,et al.  An inter-laboratory stability study of roll-to-roll coated flexible polymer solar modules , 2011 .

[24]  J. Pickett,et al.  Sample temperatures during outdoor and laboratory weathering exposures , 2009 .

[25]  Agnès Rivaton,et al.  Light-induced degradation of the active layer of polymer-based solar cells , 2010 .

[26]  Karl Leo,et al.  Total charge amount as indicator for the degradation of small molecule organic solar cells , 2011 .

[27]  Roland Steim The Impact of Interfaces on the Performance of Organic Photovoltaic Cells , 2010 .