Comparison of Bayesian methods on parameter identification for a viscoplastic model with damage

The state of materials and accordingly the properties of structures are changing over the period of use, which may influence the reliability and quality of the structure during its life-time. Therefore, identification of the model parameters of the system is a topic which has attracted attention in the content of structural health monitoring. The parameters of a constitutive model are usually identified by minimization of the difference between model response and experimental data. However, the measurement errors and differences in the specimens lead to deviations in the determined parameters. In this article, the focus is on the identification of material parameters of a viscoplastic damaging material using a stochastic simulation technique to generate artificial data which exhibit the same stochastic behavior as experimental data. It is proposed to use Bayesian inverse methods for parameter identification and therefore the model and damage parameters are identified by applying the Transitional Markov Chain Monte Carlo Method (TMCMC) and Gauss-Markov-Kalman filter (GMKF) approach. Identified parameters by using these two Bayesian approaches are compared with the true parameters in the simulation and with each other, and the efficiency of the identification methods is discussed. The aim of this study is to observe which one of the mentioned methods is more suitable and efficient to identify the model and damage parameters of a material model, as a highly non-linear model, using a limited surface displacement measurement vector and see how much information is indeed needed to estimate the parameters accurately.

[1]  Tom Schanz,et al.  Probabilistic analysis of a rock salt cavern with application to energy storage systems, using subset simulation methodology , 2016 .

[2]  Mohammad Amin Hariri-Ardebili,et al.  Probabilistic Identification of Seismic Response Mechanism in a Class of Similar Arch Dams , 2019, Infrastructures.

[3]  H. Rappel,et al.  Identifying elastoplastic parameters with Bayes ’ theorem considering double error sources and model uncertainty , 2018 .

[4]  Hermann G. Matthies,et al.  Parameter estimation via conditional expectation: a Bayesian inversion , 2016, Adv. Model. Simul. Eng. Sci..

[5]  N. Cutland,et al.  On homogeneous chaos , 1991, Mathematical Proceedings of the Cambridge Philosophical Society.

[6]  Francesco Ubertini,et al.  Estimation of elastic constants of thick laminated plates within a Bayesian framework , 2007 .

[7]  Giulio Maier,et al.  A constitutive model of metal–ceramic functionally graded material behavior: Formulation and parameter identification , 2008 .

[8]  A. Vautrin,et al.  Bayesian Identification of Elastic Constants in Multi-Directional Laminate from Moiré Interferometry Displacement Fields , 2012, Experimental Mechanics.

[9]  Pietro Croce,et al.  A BAYESIAN HIERARCHICAL MODEL FOR CLIMATIC LOADS UNDER CLIMATE CHANGE , 2019, Proceedings of the 3rd International Conference on Uncertainty Quantification in Computational Sciences and Engineering (UNCECOMP 2019).

[10]  A. Stuart,et al.  The Bayesian Approach to Inverse Problems , 2013, 1302.6989.

[11]  Joel P. Conte,et al.  Material Parameter Identification in Distributed Plasticity FE Models of Frame-Type Structures Using Nonlinear Stochastic Filtering , 2015 .

[12]  Rolf Mahnken,et al.  Identification of Material Parameters for Constitutive Equations , 2004 .

[13]  Phaedon-Stelios Koutsourelakis,et al.  A multi-resolution, non-parametric, Bayesian framework for identification of spatially-varying model parameters , 2008, J. Comput. Phys..

[14]  J. Chaboche,et al.  On the Plastic and Viscoplastic Constitutive Equations—Part I: Rules Developed With Internal Variable Concept , 1983 .

[15]  S. Mahadevan,et al.  Bayesian calibration of thermodynamic parameters for geochemical speciation modeling of cementitious materials , 2012 .

[16]  Helcio R. B. Orlande,et al.  Inverse Parameter Identification in Solid Mechanics Using Bayesian Statistics, Response Surfaces and Minimization , 2016 .

[17]  Roger G. Ghanem,et al.  Identification of Bayesian posteriors for coefficients of chaos expansions , 2010, J. Comput. Phys..

[18]  D. Little,et al.  Stochastic Identification of Linear-Viscoelastic Models of Aged and Unaged Asphalt Mixtures , 2015 .

[19]  James L. Beck,et al.  Bayesian Learning Using Automatic Relevance Determination Prior with an Application to Earthquake Early Warning , 2008 .

[20]  Adam Bobrowski,et al.  Functional analysis for probability and stochastic processes , 2013 .

[21]  Jianye Ching,et al.  Application of the transitional Markov chain Monte Carlo algorithm to probabilistic site characterization , 2016 .

[22]  K. F. Alvin,et al.  Finite Element Model Update via Bayesian Estimation and Minimization of Dynamic Residuals , 1996 .

[23]  J. Chaboche,et al.  On the Plastic and Viscoplastic Constitutive Equations—Part II: Application of Internal Variable Concepts to the 316 Stainless Steel , 1983 .

[24]  Anna De Falco,et al.  Shedding Light on the Effect of Uncertainties in the Seismic Fragility Analysis of Existing Concrete Dams , 2020, Infrastructures.

[25]  Tomonari Furukawa,et al.  Stochastic identification of elastic constants for anisotropic materials , 2010 .

[26]  Man Max Hendriks,et al.  Identification of the mechanical behavior of solid materials , 1991 .

[27]  Albert Tarantola,et al.  Inverse problem theory - and methods for model parameter estimation , 2004 .

[28]  T. Hughes,et al.  Space-time finite element methods for elastodynamics: formulations and error estimates , 1988 .

[29]  Ehsan Adeli.  Viscoplastic-Damage Model Parameter Identification via Bayesian Methods , 2019 .

[30]  D. Luenberger.  Optimization by Vector Space Methods , 1968 .

[31]  Seyed Sina Kourehli,et al.  Model updating and damage detection in multi-storyshear frames using Salp Swarm Algorithm , 2019 .

[32]  Hermann G. Matthies,et al.  A deterministic filter for non-Gaussian Bayesian estimation— Applications to dynamical system estimation with noisy measurements , 2012 .

[33]  C. S. Manohar,et al.  Bayesian parameter identification in dynamic state space models using modified measurement equations , 2015 .

[34]  Hermann G. Matthies,et al.  Bayesian parameter identification in plasticity , 2017 .

[35]  Pietro Croce,et al.  Seismic Reliability Assessment of a Concrete Water Tank Based on the Bayesian Updating of the Finite Element Model , 2017 .

[36]  Wael A. Altabey,et al.  Efficiency of grey wolf optimization algorithm for damage detection of skeletal structures via expanded mode shapes , 2020, Advances in Structural Engineering.

[37]  H. Rappel,et al.  Identifying elastoplastic parameters with Bayes’ theorem considering output error, input error and model uncertainty , 2019, Probabilistic Engineering Mechanics.

[38]  Pietro Croce,et al.  Probabilistic Seismic Assessment of Existing Masonry Buildings , 2019 .

[39]  Wei Zheng,et al.  Bayesian Probabilistic Framework for Damage Identification of Steel Truss Bridges under Joint Uncertainties , 2013 .

[40]  André Jalobeanu,et al.  Integrating laboratory creep compaction data with numerical fault models: A Bayesian framework , 2007 .

[41]  Paul Miles,et al.  Bayesian uncertainty analysis of finite deformation viscoelasticity , 2015 .

[42]  Andrew I. Dale,et al.  The theory that would not die , 2012 .

[43]  Harvey Thomas Banks,et al.  Comparison of Frequentist and Bayesian Confidence Analysis Methods on a Viscoelastic Stenosis Model , 2013, SIAM/ASA J. Uncertain. Quantification.

[44]  Thomas Most,et al.  Identification of the parameters of complex constitutive models: Least squares minimization vs. Bayesian updating , 2010 .

[45]  Hermann G. Matthies,et al.  Parameter Identification in Viscoplasticity using Transitional Markov Chain Monte Carlo Method , 2019, ArXiv.

[46]  Anna De Falco,et al.  Dynamic structural health monitoring for concrete gravity dams based on the Bayesian inference , 2020 .

[47]  Nam H. Kim,et al.  Fatigue life prediction based on Bayesian approach to incorporate field data into probability model , 2011 .

[48]  Hermann G. Matthies,et al.  Effect of Load Path on Parameter Identification for Plasticity Models using Bayesian Methods , 2019, ArXiv.

[49]  J. Ching,et al.  Transitional Markov Chain Monte Carlo Method for Bayesian Model Updating, Model Class Selection, and Model Averaging , 2007 .

[50]  H. Matthies.  Stochastic finite elements: Computational approaches to stochastic partial differential equations , 2008 .

[51]  M. Rao.  Probability theory with applications , 1984 .

[52]  Hermann G. Matthies,et al.  Bayesian Parameter Estimation via Filtering and Functional Approximations , 2016, 1611.09293.

[53]  Hermann G. Matthies,et al.  Comparison of Bayesian methods on parameter identification for a viscoplastic model with damage , 2020 .

[54]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice Using MATLAB , 2001 .

[55]  Xiaodong Zhao,et al.  A Bayesian approach for characterization of soft tissue viscoelasticity in acoustic radiation force imaging , 2016, International journal for numerical methods in biomedical engineering.

[56]  M.G. Fujie,et al.  Developing an Intraoperative Methodology Using the Finite Element Method and the Extended Kalman Filter to Identify the Material Parameters of an Organ Model , 2007, 2007 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[57]  Kumar Vemaganti,et al.  A Bayesian approach to selecting hyperelastic constitutive models of soft tissue , 2015 .

[58]  Frank Klawonn,et al.  Evaluation of statistical parameters of concrete strength from secondary experimental test data , 2018 .

[59]  Pietro Croce,et al.  On Bayesian identification methods for the analysis of existing structures , 2016 .

[60]  Joel P. Conte,et al.  Bayesian Methods for Nonlinear System Identification of Civil Structures , 2015 .

[61]  Sanjay Sampath,et al.  Micro-indentation and inverse analysis to characterize elastic /plastic graded materials , 2003 .

[62]  Hermann G. Matthies,et al.  Bayesian Parameter Determination of a CT-Test Described by a Viscoplastic-Damage Model Considering the Model Error , 2020, Metals.

[63]  Hermann G. Matthies,et al.  Concrete gravity dams model parameters updating using static measurements , 2019, Engineering Structures.

[64]  Hermann G. Matthies,et al.  Inverse Problems in a Bayesian Setting , 2015, 1511.00524.

[65]  Joel P. Conte,et al.  Nonlinear finite element model updating for damage identification of civil structures using batch Bayesian estimation , 2017 .

[66]  M. Rao.  Conditional measures and applications , 1993 .

[67]  Jérôme Antoni,et al.  Bayesian characterization of Young's modulus of viscoelastic materials in laminated structures , 2013 .

[68]  Joel P. Conte,et al.  Extended Kalman filter for material parameter estimation in nonlinear structural finite element models using direct differentiation method , 2015 .

[69]  J. Chazot,et al.  Parametric identification of elastic modulus of polymeric material in laminated glasses , 2012 .

[70]  Alberto Corigliano,et al.  Parameter identification of a time-dependent elastic-damage interface model for the simulation of debonding in composites ☆ , 2001 .

[71]  O. Wall,et al.  Estimation of Parameters in Viscoplastic and Creep Material Models , 2001, SIAM J. Appl. Math..

[72]  Denis Bosq.  General Linear Processes in Function Spaces , 2000 .

[73]  Nicola Bonora,et al.  Modeling ductile damage under fully reversed cycling , 2003 .

[74]  Nicholas Zabaras,et al.  A Bayesian inference approach to the inverse heat conduction problem , 2004 .

[75]  Alberto Corigliano,et al.  Simulation of damage in composites by means of interface models: parameter identification , 2001 .

[76]  G. Maier,et al.  Parameter identification of a cohesive crack model by Kalman filter , 2002 .

[77]  Tamara Nestorović,et al.  Finite element model updating using simulated annealing hybridized with unscented Kalman filter , 2016 .

[78]  M. Tribus,et al.  Probability theory: the logic of science , 2003 .

[79]  Oliver Pajonk,et al.  Stochastic Spectral Methods for Linear Bayesian Inference , 2012 .

[80]  Jean-Claude Golinval,et al.  Structural Damage Diagnosis by Kalman Model Based on Stochastic Subspace Identification , 2004 .

[81]  Ehsan Noroozinejad Farsangi,et al.  Supervised damage and deterioration detection in building structures using an enhanced autoregressive time-series approach , 2020 .

[82]  D. Bosq.  Linear Processes in Function Spaces: Theory And Applications , 2000 .

[83]  Dieter Dinkler,et al.  A nonlocal damage model for mild steel under inelastic cyclic straining , 2012 .

[84]  K. D. Murphy,et al.  Bayesian identification of a cracked plate using a population-based Markov Chain Monte Carlo method , 2011 .

[85]  Marek Słoński,et al.  BAYESIAN IDENTIFICATION OF ELASTIC PARAMETERS IN COMPOSITE LAMINATES APPLYING LAMB WAVES MONITORING , 2015 .

[86]  Raphael T. Haftka,et al.  Introduction to the Bayesian Approach Applied to Elastic Constants Identification , 2010 .

[87]  D. Xiu.  Numerical Methods for Stochastic Computations: A Spectral Method Approach , 2010 .

[88]  Toshio Nakamura,et al.  Identification of elastic-plastic anisotropic parameters using instrumented indentation and inverse analysis , 2007 .

[89]  Markus König,et al.  Probabilistic analysis of a gas storage cavity mined in a spatially random rock salt medium , 2017 .

[90]  Tshilidzi Marwala,et al.  Finite Element Model Updating Using Bayesian Framework and Modal Properties , 2005 .

[91]  G. Evensen.  Data Assimilation: The Ensemble Kalman Filter , 2006 .

[92]  Lambros S. Katafygiotis,et al.  Transitional Markov Chain Monte Carlo Simulation for Reliability-based Optimization , 2013 .

[93]  R. D. Wood,et al.  Nonlinear Continuum Mechanics for Finite Element Analysis , 1997 .

[94]  P. S. Koutsourelakis,et al.  A novel Bayesian strategy for the identification of spatially varying material properties and model validation: an application to static elastography , 2012, 1512.05913.

[95]  Tadeusz Uhl,et al.  Bayesian parameter identification of orthotropic composite materials using Lamb waves dispersion curves measurement , 2017 .

[96]  Jan-Eric Ståhl,et al.  Identification of plasticity constants from orthogonal cutting and inverse analysis , 2014 .

[97]  Nam H. Kim,et al.  Identification of correlated damage parameters under noise and bias using Bayesian inference , 2011 .