Efficient Surface Passivation and Electron Transport Enable Low Temperature-Processed Inverted Perovskite Solar Cells with Efficiency over 20%

PCBM is a fullerene derivative, which is commonly employed as an electron transport layer (ETL), and still has some issues to fabricate low temperature-processed perovskite solar cells (PSCs) such ...

[1]  Jun Hee Lee,et al.  Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide , 2019, Science.

[2]  Yongfang Li,et al.  Targeted Therapy for Interfacial Engineering Toward Stable and Efficient Perovskite Solar Cells , 2019, Advanced materials.

[3]  Qichun Zhang,et al.  Sulfur Position in Pyrene-Based PTTIs Plays a Key Role To Determine the Performance of Perovskite Solar Cells When PTTIs Were Employed as Electron Transport Layers , 2019, ACS Applied Energy Materials.

[4]  J. Xie,et al.  Recent Progress in Organic Electron Transport Materials in Inverted Perovskite Solar Cells. , 2019, Small.

[5]  C. Brabec,et al.  A Generalized Crystallization Protocol for Scalable Deposition of High‐Quality Perovskite Thin Films for Photovoltaic Applications , 2019, Advanced science.

[6]  Fei Wu,et al.  Designing a Perylene Diimide/Fullerene Hybrid as Effective Electron Transporting Material in Inverted Perovskite Solar Cells with Enhanced Efficiency and Stability. , 2019, Angewandte Chemie.

[7]  X. Zhan,et al.  Nonfullerene n‐Type Organic Semiconductors for Perovskite Solar Cells , 2019, Advanced Energy Materials.

[8]  Yongli Gao,et al.  Cation and anion immobilization through chemical bonding enhancement with fluorides for stable halide perovskite solar cells , 2019, Nature Energy.

[9]  Helin Wang,et al.  Amino-acid ester derived perylene diimides electron acceptor materials: An efficient strategy for green-solvent-processed organic solar cells , 2019, Dyes and Pigments.

[10]  Ruixia Yang,et al.  Stable Efficiency Exceeding 20.6% for Inverted Perovskite Solar Cells through Polymer-Optimized PCBM Electron-Transport Layers. , 2019, Nano letters.

[11]  T. Ma,et al.  Current progress in interfacial engineering of carbon-based perovskite solar cells , 2019, Journal of Materials Chemistry A.

[12]  Yang Yang,et al.  Supersymmetric laser arrays , 2019, Nature Photonics.

[13]  C. Brabec,et al.  Sequential Deposition of High‐Quality Photovoltaic Perovskite Layers via Scalable Printing Methods , 2019, Advanced Functional Materials.

[14]  Mingguang Zhu,et al.  Perylene Diimide-Based Electron-Transporting Material for Perovskite Solar Cells with Undoped Poly(3-hexylthiophene) as Hole-Transporting Material. , 2019, ChemSusChem.

[15]  O. Zmeskal,et al.  Density of bulk trap states of hybrid lead halide perovskite single crystals: temperature modulated space-charge-limited-currents , 2019, Scientific Reports.

[16]  B. Lee,et al.  Versatile Defect Passivation Methods for Metal Halide Perovskite Materials and their Application to Light‐Emitting Devices , 2019, Advanced materials.

[17]  C. H. Ng,et al.  Melamine Hydroiodide Functionalized MAPbI3 Perovskite with Enhanced Photovoltaic Performance and Stability in Ambient Atmosphere , 2018, Solar RRL.

[18]  T. Ma,et al.  Addition Effect of Pyreneammonium Iodide to Methylammonium Lead Halide Perovskite‐2D/3D Heterostructured Perovskite with Enhanced Stability , 2018, Advanced Functional Materials.

[19]  Fei Wu,et al.  A perylene diimide-based electron transport layer enabling efficient inverted perovskite solar cells , 2018 .

[20]  G. Cao,et al.  Monolayer-like hybrid halide perovskite films prepared by additive engineering without antisolvents for solar cells , 2018 .

[21]  C. H. Ng,et al.  Magnesium-Doped MAPbI3 Perovskite Layers for Enhanced Photovoltaic Performance in Humid Air Atmosphere. , 2018, ACS applied materials & interfaces.

[22]  H. Tian,et al.  Efficient Passivation of Hybrid Perovskite Solar Cells Using Organic Dyes with COOH Functional Group , 2018 .

[23]  T. Ma,et al.  Enhanced Crystallization by Methanol Additive in Antisolvent for Achieving High-Quality MAPbI3 Perovskite Films in Humid Atmosphere. , 2018, ChemSusChem.

[24]  Danjie Liu,et al.  Restrained light-soaking and reduced hysteresis in perovskite solar cells employing a helical perylene diimide interfacial layer , 2018 .

[25]  T. Ma,et al.  Dependence of Acetate-Based Antisolvents for High Humidity Fabrication of CH3NH3PbI3 Perovskite Devices in Ambient Atmosphere. , 2018, ACS applied materials & interfaces.

[26]  Anders Hagfeldt,et al.  Interpretation and evolution of open-circuit voltage, recombination, ideality factor and subgap defect states during reversible light-soaking and irreversible degradation of perovskite solar cells , 2018 .

[27]  T. Hayat,et al.  Enhancing the crystallinity of HC(NH2)2PbI3 film by incorporating methylammonium halide intermediate for efficient and stable perovskite solar cells , 2017 .

[28]  P. Karuppuswamy,et al.  Solution-processable electron transport layer for efficient hybrid perovskite solar cells beyond fullerenes , 2017 .

[29]  Bo Chen,et al.  Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations , 2017, Nature Energy.

[30]  Eugene A. Katz,et al.  Effect of Electron‐Transport Material on Light‐Induced Degradation of Inverted Planar Junction Perovskite Solar Cells , 2017 .

[31]  Xiao Wei Sun,et al.  Improving Interfacial Charge Recombination in Planar Heterojunction Perovskite Photovoltaics with Small Molecule as Electron Transport Layer , 2017 .

[32]  Xiao Wei Sun,et al.  Pushing up the efficiency of planar perovskite solar cells to 18.2% with organic small molecules as the electron transport layer , 2017 .

[33]  T. Hayat,et al.  Effect of Energy Alignment, Electron Mobility, and Film Morphology of Perylene Diimide Based Polymers as Electron Transport Layer on the Performance of Perovskite Solar Cells. , 2017, ACS applied materials & interfaces.

[34]  Jinsong Huang,et al.  π‐Conjugated Lewis Base: Efficient Trap‐Passivation and Charge‐Extraction for Hybrid Perovskite Solar Cells , 2017, Advanced materials.

[35]  Kai Zhu,et al.  Towards stable and commercially available perovskite solar cells , 2016, Nature Energy.

[36]  Hongzheng Chen,et al.  Morphology control of planar heterojunction perovskite solar cells with fluorinated PDI films as organic electron transport layer , 2016 .

[37]  Jinsong Huang,et al.  Thin Insulating Tunneling Contacts for Efficient and Water‐Resistant Perovskite Solar Cells , 2016, Advanced materials.

[38]  Mingkui Wang,et al.  Amino‐Functionalized Conjugated Polymer as an Efficient Electron Transport Layer for High‐Performance Planar‐Heterojunction Perovskite Solar Cells , 2016 .

[39]  Aslihan Babayigit,et al.  Toxicity of organometal halide perovskite solar cells. , 2016, Nature materials.

[40]  W. Jo,et al.  A perylene diimide-based non-fullerene acceptor as an electron transporting material for inverted perovskite solar cells , 2016 .

[41]  Nam-Gyu Park,et al.  Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide. , 2015, Journal of the American Chemical Society.

[42]  J. Bisquert,et al.  Defect migration in methylammonium lead iodide and its role in perovskite solar cell operation , 2015 .

[43]  Jia Xu,et al.  Efficient perovskite/fullerene planar heterojunction solar cells with enhanced charge extraction and suppressed charge recombination. , 2015, Nanoscale.

[44]  Nakita K. Noel,et al.  Enhanced photoluminescence and solar cell performance via Lewis base passivation of organic-inorganic lead halide perovskites. , 2014, ACS nano.

[45]  Leone Spiccia,et al.  A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells. , 2014, Angewandte Chemie.

[46]  Yang Yang,et al.  Interface engineering of highly efficient perovskite solar cells , 2014, Science.

[47]  Alain Goriely,et al.  Morphological Control for High Performance, Solution‐Processed Planar Heterojunction Perovskite Solar Cells , 2014 .

[48]  Sandeep Kumar Pathak,et al.  Overcoming ultraviolet light instability of sensitized TiO2 with meso-superstructured organometal tri-halide perovskite solar cells , 2013, Nature Communications.

[49]  Henry J. Snaith,et al.  Efficient planar heterojunction perovskite solar cells by vapour deposition , 2013, Nature.

[50]  J. Teuscher,et al.  Efficient Hybrid Solar Cells Based on Meso-Superstructured Organometal Halide Perovskites , 2012, Science.