Zur Zuverlässigkeit der Bemessung gegen Durchstanzen bei Einzelfundamenten

[1]  M. Hallgren.  Non-linear finite element analyses of column footings loaded to punching shear failure , 2000 .

[2]  Milan Holický,et al.  Reliability based calibration of Eurocodes considering a steel member , 2002 .

[3]  A.C.W.M. Vrouwenvelder.  Reliability Based Code calibration. The use of the JCSS Probabilistic Model Code , 2002 .

[4]  M. Timm.  Durchstanzen von Bodenplatten unter rotationssymmetrischer Belastung , 2003 .

[5]  I Imran,et al.  EXPERIMENTAL STUDY OF PLAIN CONCRETE UNDER TRIAXIAL STRESS. CLOSURE , 1996 .

[6]  Walter H. Dilger,et al.  Critical review of the CSA A23.3-94 punching shear strength provisions for interior columns , 1996 .

[7]  Philip L. Chalk,et al.  Probability Model for Design Live Loads , 1980 .

[8]  Paul E. Mast.  Stresses in Flat Plates Near Columns , 1970 .

[9]  C A Cornell,et al.  A PROBABILITY BASED STRUCTURAL CODE , 1969 .

[10]  W. Stahel,et al.  Log-normal Distributions across the Sciences: Keys and Clues , 2001 .

[11]  Carl Erik Broms,et al.  Elimination of Flat Plate Punching Failure Mode , 2000 .

[12]  H. Dieterle.  ZUR BEMESSUNG VON FUNDAMENTPLATTEN OHNE SCHUBBEWEHRUNG , 1978 .

[13]  Mikael Hallgren,et al.  Non-linear finite element analyses of punching shear failure of column footings , 2002 .

[14]  Kurt H. Gerstle,et al.  Concrete Over the Top--Or, is there Life After Peak? , 1989 .

[15]  V. Papanikolaou,et al.  Confinement-sensitive plasticity constitutive model for concrete in triaxial compression , 2007 .

[16]  Aurelio Muttoni,et al.  Behavior of Beams and Punching in Slabs without Shear Reinforcement , 1991 .

[17]  Josef Hegger,et al.  Punching of Reinforced Concrete Flat Slabs – ACI and German Guidelines , 2005 .

[18]  Takuji Nishimura,et al.  Mersenne twister: a 623-dimensionally equidistributed uniform pseudo-random number generator , 1998, TOMC.

[19]  O. Ditlevsen.  Narrow Reliability Bounds for Structural Systems , 1979 .

[20]  A. Hillerborg,et al.  Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements , 1976 .

[21]  Marcus Ricker,et al.  Experimental Investigations on Punching Behavior of Reinforced Concrete Footings , 2006 .

[22]  Neil M. Hawkins,et al.  INFLUENCE OF COLUMN RECTANGULARITY ON THE BEHAVIOR OF FLAT PLATE STRUCTURES , 1971 .

[23]  Alfred M. Freudenthal,et al.  SAFETY AND THE PROBABILITY OF STRUCTURAL FAILURE , 1956 .

[24]  Josef Hegger,et al.  Zur maximalen Durchstanztragfähigkeit von Flachdecken. , 2007 .

[25]  J. Walraven.  Design of structures for punching : present status of revision of EC-2 , 2000 .

[26]  Aurelio Muttoni,et al.  Schubfestigkeit und Durchstanzen von Platten ohne Querkraftbewehrung , 2003 .

[27]  F. E. Richart,et al.  Reinforced Concrete Wall and Column Footings , 1948 .

[28]  Sunil Kumar,et al.  Live loads in office buildings: lifetime maximum load , 2002 .

[29]  R. M. Zimmerman,et al.  Compressive Strength of Plain Concrete Under Multiaxial Loading Conditions , 1970 .

[30]  Stefano Guandalini,et al.  Poinçonnement symétrique des dalles en béton armé , 2006 .

[31]  Carl Erik Broms,et al.  Ductility of Flat Plates: Comparison of Shear Reinforcement Systems , 2007 .

[32]  N. S. Ottosen.  A Failure Criterion for Concrete , 1977 .

[33]  Sunil Kumar.  Live loads in office buildings: point-in-time load intensity , 2002 .

[34]  S. Kinnunen,et al.  Punching of concrete slabs without shear reinforcement , 1960 .

[35]  Josef Hegger,et al.  Zur Durchstanzbemessung von ausmittig beanspruchten Stützenknoten und Einzelfundamenten nach Eurocode 2 , 2008 .

[36]  Luc Taerwe.  Model uncertainties in reliability formats for concrete structures , 1995 .

[37]  Arthur Newell Talbot,et al.  Reinforced Concrete Wall Footings and Column Footings , 2010 .

[38]  E. Riks.  The Application of Newton's Method to the Problem of Elastic Stability , 1972 .

[39]  Ross B. Corotis,et al.  Area-Dependent Processes for Structural Live Loads , 1981 .

[40]  Flexural Limit Analysis of Concentrically Loaded Column Footings , 1983 .

[41]  Hans Gesund.  Flexural Limit Design of Column Footings , 1985 .

[42]  Gerhard Spaethe,et al.  Die Sicherheit tragender Baukonstruktionen , 1992 .

[43]  P. E. Regan.  Punching of slabs under highly concentrated loads , 2004 .

[44]  P. H. Feenstra,et al.  A composite plasticity model for concrete , 1996 .

[45]  N. Bleistein,et al.  Asymptotic Expansions of Integrals , 1975 .

[46]  M. Holicky,et al.  Reliability assessment of alternative Eurocode and South African load combination schemes for structural design : technical paper , 2005 .

[47]  A. M. Hasofer,et al.  Exact and Invariant Second-Moment Code Format , 1974 .

[48]  C. Allin Cornell,et al.  Spatial and Temporal Variability of Live Loads , 1973 .

[49]  Maria Anna Polak,et al.  Punching shear in reinforced concrete slabs , 2005 .

[50]  Gerald Schickert,et al.  Versuchsergebnisse zur Festigkeit und Verformung von Beton bei mehraxialer Druckbeanspruchung , 1977 .

[51]  Jeeho Lee,et al.  Plastic-Damage Model for Cyclic Loading of Concrete Structures , 1998 .

[52]  Carl Erik Broms,et al.  SHEAR REINFORCEMENT FOR DEFLECTION DUCTILITY OF FLAT PLATES , 1990 .

[53]  Aurelio Muttoni,et al.  Punching shear strength of reinforced concrete slabs without transverse reinforcement , 2008 .

[54]  Carl Erik Broms.  Ductility reinforcement for flat slabs in seismic areas , 2006 .

[55]  M. Hallgren.  Punching Shear Capacity of Reinforced High Strength Concrete Slabs , 1996 .

[56]  D. Nölting.  Durchstanzbemessung bei ausmittiger Stützenlast , 2001 .

[57]  Alaa G. Sherif,et al.  Punching Strength of Reinforced Concrete Footings , 2009 .

[58]  K. Stiglat,et al.  Zum Tragverhalten, Konstruieren und Bemessen von Flachdecken. , 1984 .

[59]  K. Breitung.  Asymptotic approximations for multinormal integrals , 1984 .

[60]  Henrik O. Madsen,et al.  Structural Reliability Methods , 1996 .

[61]  Josef Hegger,et al.  Investigations on the punching behaviour of reinforced concrete footings , 2007 .

[62]  Rüdiger Rackwitz.  Predictive distribution of strength under control , 1983 .

[63]  Jana Markova.  Calibration of Reliability Elements for a Column , 2002 .

[64]  Bruce R. Ellingwood,et al.  Analysis of Live Loads in Office Buildings , 1977 .

[65]  M A Staller.  Analytische und numerische Untersuchungen des Durchstanzverhaltens punktgestuetzter Stahlbetonplatten / Analytical studies and numerical analysis of punching shear failure in point-supported reinforced concrete slabs , 2001 .

[66]  Carl Erik Broms,et al.  Punching of flat plates : a question of concrete properties in biaxial compression and size effect , 1990 .

[67]  Otto Graf.  Versuche über die Widerstandsfähigkeit von allseitig aufliegenden dicken Eisenbetonplatten unter Einzellasten : durchgeführt in den Jahren 1935 und 1936 in der Materialprüfungsanstalt an der Technischen Hochschule Stuttgart , 1938 .

[68]  Carl Erik Broms.  Concrete flat slabs and footings : Design method for punching and detailing for ductility , 2005 .

[69]  Alfred M. Freudenthal,et al.  The Safety of Structures , 1947 .

[70]  C. Allin Cornell,et al.  Live Load Effects in Office Buildings , 1974 .

[71]  Michael Havbro Faber,et al.  Probabilistic modeling of timber structures , 2005 .