An adaptive pneumatic suspension system for improving ride comfort and handling

The paper describes an adaptive pneumatic suspension system that can improve both comfort and handling. Each air spring in the vehicle is connected to an auxiliary tank via two connecting pipes of different sizes. Choosing the connecting pipe with larger diameter and shorter length renders a compliant suspension which improves comfort. Conversely, choosing the connecting pipe with smaller diameter and longer length makes the suspension stiffer which favors handling. Toggling between configurations is fast, efficient, and easily done by simply opening or closing the corresponding electrovalves. The proposed adaptive system requires a GPS receiver and access to two pieces of information regarding the road at every location: the International Roughness Index and the curve radius (if not infinite). This information is used to predict road-induced vibrations and evaluate comfort with the ISO 2631 standard, as well as forecast roll angles and settling times for handling assessment. These predictions are used to select the most appropriate configuration.

[1]  Wei-Hsin Liao,et al.  Vibration control of a suspension system via a magnetorheological fluid damper , 2000, Symposium on Applied Photonics.

[2]  P.J.T. Venhovens.  Optimal Control of Vehicle Suspensions , 1994 .

[3]  Seung-Bok Choi,et al.  Field test results of a semi-active ER suspension system associated with skyhook controller , 2001 .

[4]  Igor Maciejewski,et al.  Control system design of active seat suspensions , 2012 .

[5]  P. E. Uys,et al.  Criteria for handling measurement , 2006 .

[6]  F. Vlk.  Handling performance of truck–trailer vehicles: A state–of–the–art survey , 2014 .

[7]  Dean Karnopp,et al.  Advanced Ground Vehicle Suspension Systems - A Classified Bibliography , 1995 .

[8]  T D Gillespie,et al.  Fundamentals of Vehicle Dynamics , 1992 .

[9]  A. L. Morales,et al.  An analytical model of pneumatic suspensions based on an experimental characterization , 2008 .

[10]  David Crolla,et al.  Road Vehicle Suspension System Design - a review , 1987 .

[11]  P. E. Uys,et al.  Suspension settings for optimal ride comfort of off-road vehicles travelling on roads with different roughness and speeds , 2007 .

[12]  Seung-Bok Choi,et al.  Human simulated intelligent control of vehicle suspension system with MR dampers , 2009 .

[13]  Zushu Li,et al.  A Comparison of Suitable Control Methods for Full Vehicle with Four MR Dampers Part II Controller Synthesis and Road Test Validation , 2009 .

[14]  G Chen,et al.  MR damper and its application for semi-active control of vehicle suspension system , 2002 .

[15]  A. L. Morales,et al.  Unbalanced machinery vibration isolation with a semi-active pneumatic suspension , 2010 .

[16]  Dean Karnopp,et al.  Vibration Control Using Semi-Active Force Generators , 1974 .

[17]  P. E. Uys,et al.  The ride comfort vs. handling compromise for off-road vehicles , 2007 .

[18]  D. C. Chen,et al.  VEHICLE HANDLING ASSESSMENT USING A COMBINED SUBJECTIVE-OBJECTIVE APPROACH , 1998 .

[19]  P. Donati,et al.  SURVEY OF TECHNICAL PREVENTATIVE MEASURES TO REDUCE WHOLE-BODY VIBRATION EFFECTS WHEN DESIGNING MOBILE MACHINERY , 2002 .

[20]  Juan Ramón Trapero Arenas,et al.  An adaptive pneumatic suspension based on the estimation of the excitation frequency , 2011 .

[21]  Edge C. Yeh,et al.  A fuzzy preview control scheme of active suspension for rough road , 1994 .

[22]  Brian Hurley,et al.  Reducing Whole Body Vibration Levels in Off-road, Heavy-duty Vehicles: A Case Study with Computer Modelling , 2010 .

[23]  M. F. Golnaraghi,et al.  Semi-active Vibration Control Schemes for Suspension Systems Using Magnetorheological Dampers , 2006 .

[24]  Igor Maciejewski,et al.  Application of the Pareto-optimal approach for selecting dynamic characteristics of seat suspension systems , 2011 .

[25]  A. L. Morales,et al.  An adaptive pneumatic system for the attenuation of random vibrations , 2015 .

[26]  Seung-Bok Choi,et al.  Vibration control of an MR seat damper for commercial vehicles , 2000, Smart Structures.

[27]  David J. Wagg,et al.  Quasi-active suspension design using magnetorheological dampers , 2011 .

[28]  Igor Maciejewski,et al.  The vibration damping effectiveness of an active seat suspension system and its robustness to varying mass loading , 2010 .