A novel acceleration-controlled random vibration fretting test methodology: From classical sinusoidal to Gaussian random excitation

[1]  J. Hintikka,et al.  Stable and unstable friction in fretting contacts , 2019, Tribology International.

[2]  S. Fouvry,et al.  Modelling the fretting fatigue crack growth: From short crack correction strategies to microstructural approaches , 2018, International Journal of Fatigue.

[3]  E. Han,et al.  Effect of normal force on the fretting wear behavior of Inconel 690 TT against 304 stainless steel in simulated secondary water of pressurized water reactor , 2018, Tribology International.

[4]  A. H. van den Boogaard,et al.  The effects of temperature on friction and wear mechanisms during direct press hardening of Al-Si coated ultra-high strength steel , 2018, Wear.

[5]  J. Buffière,et al.  Numerical methods for stress intensity factor ΔK calculations of fretting cracked interface , 2018 .

[6]  S. Fouvry,et al.  Contact size, frequency and cyclic normal force effects on Ti–6Al–4V fretting wear processes: An approach combining friction power and contact oxygenation , 2017 .

[7]  Luis Reis,et al.  Fatigue damage assessment under random and variable amplitude multiaxial loading conditions in structural steels , 2017 .

[8]  S. Fouvry,et al.  Fretting wear of a nitrided 316L/304L contact subject to in-phase normal force fluctuation in dry and lithium-boron solution: An R P -friction energy wear approach , 2017 .

[9]  S. Fouvry,et al.  Fretting wear response of a nitrided 316L SS/304L SS interface: Effect of lithium/bore liquid environment , 2016 .

[10]  Yu Jiang,et al.  Fatigue life prediction model for accelerated testing of electronic components under non-Gaussian random vibration excitations , 2016, Microelectron. Reliab..

[11]  K. G. Thirugnanasambantham,et al.  Mechanistic studies on degradation in sliding wear behavior of IN718 and Hastelloy X superalloys at 500 °C , 2016 .

[12]  S. Fouvry,et al.  Investigation of grease behavior under simple and complex displacement amplitudes conditions , 2016 .

[13]  Yu Jiang,et al.  Experimental Design and Validation of an Accelerated Random Vibration Fatigue Testing Methodology , 2015 .

[14]  R. Toscano,et al.  An energy-based approach to understand the effect of fretting displacement amplitude on grease-lubricated interface , 2015 .

[15]  H. Attia,et al.  Characterization of fretting wear of cobalt-based superalloys at high temperature for aero-engine combustor components , 2015 .

[16]  J. Hintikka,et al.  Non-Coulomb friction in gross sliding fretting conditions with aluminium bronze against quenched and tempered steel , 2014 .

[17]  J. Buffière,et al.  Introduction of a reverse simulation approach to identify the fatigue stress intensity factor crack arrest threshold from fretting cracking experiments , 2014 .

[18]  H. Attia,et al.  Fretting wear characteristics of cold gas-dynamic sprayed aluminum alloys , 2011 .

[19]  H. Attia.  Thermal constriction phenomenon in fretting: Theory and implications☆ , 2011 .

[20]  Mehmet Çelik,et al.  An accelerated life test approach for aerospace structural components , 2008 .

[21]  Giuliano Allegri,et al.  On the inverse power laws for accelerated random fatigue testing , 2008 .

[22]  M. O. M. Osman,et al.  New parameter for characterizing and correlating impact-sliding fretting wear to energy dissipation—experimental investigation , 2007 .

[23]  M. Helmi Attia,et al.  Fretting fatigue and wear damage of structural components in nuclear power stations—Fitness for service and life management perspective , 2006 .

[24]  Denis Benasciutti,et al.  Fatigue life assessment in non-Gaussian random loadings , 2006 .

[25]  M. Attia.  Fretting wear of Zr-alloy pressure tubes under the combined effects of in-plane and out-of-plane flow-induced vibrations , 2005 .

[26]  M. H. Attia,et al.  Experimental investigation of long-term fretting wear of multi-span steam generator tubes with U-bend sections , 1999 .

[27]  Yemane B Gessesse,et al.  On the fretting wear of nuclear power plant heat exchanger tubes using a fracture mechanics approach : theory and verification , 1997 .

[28]  Siegfried Fouvry,et al.  Quantification of fretting damage , 1996 .

[29]  Leo Vincent,et al.  Mixed fretting regime , 1995 .

[30]  M. Attia,et al.  Effect of mode of motion and process parameters on the prediction of temperature rise in fretting wear , 1985 .

[31]  J. Buffière,et al.  Identification of the fatigue stress intensity factor threshold for different load ratios R: From fretting fatigue to C(T) fatigue experiments , 2016 .

[32]  A. Warmuth,et al.  The influence of surface hardness on the fretting wear of steel pairs: its role in debris retention in the contact , 2015 .

[33]  Richard G. Sauvé,et al.  Probabilistic Assessment of Fretting Wear in Steam Generator Tubes Under Flow Induced Vibrations , 2003 .

[34]  Michael E. Conner,et al.  Flow Induced Vibration and Fretting Wear in PWR Fuel , 2002 .

[35]  Yves Berthier,et al.  Testing Methods in Fretting Fatigue: A Critical Appraisal , 1992 .

[36]  University of Huddersfield Repository Development of a fretting-fatigue mapping concept: The effect of material properties and surface treatments , 2022 .