On the Influence of Thermal Mass and Natural Ventilation on Overheating Risk in Offices

Free cooling strategies are gaining importance in design practice due to the increased risk of overheating in well-insulated buildings with high internal loads such as offices. The state of the art highlights that the most efficient passive solution for indoor temperature stabilization and control is the integration of thermal mass with an optimized ventilative cooling profile to enhance the thermal cycle of heat storage. Due to its cyclical behavior, thermal mass effects are difficult to predict and quantify with the traditional steady-state approach to building thermal performance. Dynamic thermal simulations help to assess a building’s behavior under transient situations, including the thermal mass influence. However, building codes usually include thermal simulations based on standard assumptions: typical meteorological year (TMY), standard occupancy, standard daily-based lighting and appliances profiles, and standard weekly-based occupancy. Thus, when assumptions change, the actual behavior of the building may vary consistently from the predicted conditions. In this paper, we focused on the ability of thermal mass to contrast the influence of variations from the standard assumptions, especially in relation to climate and ventilation profiles. The results show the necessity of encompassing different risk scenarios when evaluating a free cooling solution performance. Among the different scenarios simulated, natural ventilation misuse shows greater influence on the thermal indoor environment, especially if coupled with low thermal mass.

[1]  Danny H.W. Li,et al.  Impact of climate change on energy use in the built environment in different climate zones – A review , 2012 .

[2]  T. Frank,et al.  Climate change impacts on building heating and cooling energy demand in Switzerland , 2005 .

[3]  Tianzhen Hong,et al.  Advances in research and applications of energy-related occupant behavior in buildings ☆ , 2016 .

[4]  Aidan Reilly,et al.  The impact of thermal mass on building energy consumption , 2017 .

[5]  P Pieter-Jan Hoes,et al.  User behavior in whole building simulation , 2009 .

[6]  Francesco Patania,et al.  Assessment of the dynamic thermal performance of massive buildings , 2014 .

[7]  Steven B. Leeb,et al.  Control with building mass-Part II: Simulation , 2006 .

[8]  Emmanuel Rey,et al.  LCA as key factor for implementation of inertia in a low carbon performance driven design: the case of the smart living building in Fribourg, Switzerland , 2016 .

[9]  Alexandra R. Rempel,et al.  Rocks, Clays, Water, and Salts: Highly Durable, Infinitely Rechargeable, Eminently Controllable Thermal Batteries for Buildings , 2013 .

[10]  Massimiliano Manfren,et al.  Thermal inertia and energy efficiency – Parametric simulation assessment on a calibrated case study , 2015 .

[11]  Ian Gibson,et al.  Adaptive thermal comfort: principles and practice , 2014 .

[12]  Constantinos A. Balaras,et al.  The role of thermal mass on the cooling load of buildings. An overview of computational methods , 1996 .

[13]  Federica Rosso,et al.  Building in Historical Areas: Identity Values and Energy Performance of Innovative Massive Stone Envelopes with Reference to Traditional Building Solutions , 2018 .

[14]  Armando C. Oliveira,et al.  A field study on building inertia and its effects on indoor thermal environment , 2012 .

[15]  Baruch Givoni,et al.  Effectiveness of mass and night ventilation in lowering the indoor daytime temperatures. Part I: 1993 experimental periods , 1998 .

[16]  Lin-Shu Wang,et al.  A study of building envelope and thermal mass requirements for achieving thermal autonomy in an office building , 2014 .

[17]  Endrit Hoxha,et al.  Building 2050 - Scientific concept and transition to the experimental phase , 2015 .

[18]  U. Magrini,et al.  The Influence of the Thermal Inertia of Building Structures On Comfort and Energy Consumption , 1981 .

[19]  Steven B. Leeb,et al.  Control with building mass-Part I: Thermal response model , 2006 .

[20]  Omer Kaynakli,et al.  A review of the economical and optimum thermal insulation thickness for building applications , 2012 .

[21]  Paul Raftery,et al.  Calibrating whole building energy models: An evidence-based methodology , 2011 .

[22]  A. Brambilla,et al.  Life cycle efficiency ratio: A new performance indicator for a life cycle driven approach to evaluate the potential of ventilative cooling and thermal inertia , 2018 .

[23]  Bernard Paule,et al.  DIAL+Suite : a new suite of tools to optimize the global energy performance of room design , 2012 .

[24]  Amaryllis Audenaert,et al.  Thermal inertia in buildings: A review of impacts across climate and building use , 2018 .

[25]  H. Asan.  Numerical computation of time lags and decrement factors for different building materials , 2006 .

[26]  Karsten Voss,et al.  Net zero energy buildings: A consistent definition framework , 2012 .

[27]  Robert Černý,et al.  Monitoring Thermal Performance of Hollow Bricks with Different Cavity Fillers in Difference Climate Conditions , 2015 .

[28]  Tony Roskilly,et al.  This Work Is Licensed under a Creative Commons Attribution 4.0 International License Royapoor M, Roskilly T. Building Model Calibration Using Energy and Environmental Data. Energy and Buildings Building Model Calibration Using Energy and Environmental Data Keywords: Model Calibration Measured Energy , 2022 .

[29]  O. Douzane,et al.  Incorporation of thermal inertia in the aim of installing a natural nighttime ventilation system in buildings , 1999 .

[30]  Behdad Moghtaderi,et al.  Effect of thermal mass on the thermal performance of various Australian residential constructions systems , 2008 .

[31]  Tarik Kousksou,et al.  Energy consumption and efficiency in buildings: current status and future trends , 2015 .

[32]  Fu-Sheng Gao,et al.  Night ventilation control strategies in office buildings , 2009 .

[33]  Darren Robinson,et al.  A generalised stochastic model for the simulation of occupant presence , 2008 .

[34]  Gianpiero Evola,et al.  Synergic effects of thermal mass and natural ventilation on the thermal behaviour of traditional massive buildings , 2016 .

[35]  Thomas Jusselme,et al.  Preventing overheating in offices through thermal inertial properties of compressed earth bricks: A study on a real scale prototype , 2017 .