Concept for Magnet Intra Logistics and Assembly Supporting the Improvement of Running Characteristics of Permanent Magnet Synchronous Motors

Abstract Current scientific studies prove the dependency of the running characteristics of permanent magnet synchronous motors on variations of the physical properties of permanent magnets and manufacturing errors. Currently, this fact is not considered in most process chains for magnet and rotor assembly. Thus, insufficient rotor quality can only be detected during the end-of-line test, causing rejects of whole motors. As a solution for these drawbacks, a computerized magnet intra-logistics storage and assembly concept is presented, using sophisticated magnet measurement technologies. This concept allows for the traceability of single magnets and enables to compensate variations of the magnetic properties by selective magnet assembly.

[1]  Manuel Burgos-Payan,et al.  Influence of Manufacturing Tolerances on the Electromotive Force in Permanent-Magnet Motors , 2013, IEEE Transactions on Magnetics.

[2]  Kay Hameyer,et al.  Manufacturing Tolerances: Estimation and Prediction of Cogging Torque Influenced by Magnetization Faults , 2012, IEEE Transactions on Magnetics.

[3]  M. Klausnitzer,et al.  Quick cogging torque calculation for electronically commutated motors considering combinations of deviant and flawless magnets , 2012, International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion.

[4]  J. Franke,et al.  Innovative developments for automated assembly and fixation of integrated permanent magnets in rotors of synchronous machines , 2015, 2015 5th International Electric Drives Production Conference (EDPC).

[5]  Manuel Peter,et al.  Optimized magnet assembly algorithms for reduced rotor unbalance: New rotor balancing strategy by measuring the weight of each magnet and placing it according to an algorithm , 2015, 2015 5th International Electric Drives Production Conference (EDPC).

[6]  Alexander Meyer,et al.  Automated magnet assembly for large PM synchronous machines with integrated permanent magnets , 2013, 2013 3rd International Electric Drives Production Conference (EDPC).

[7]  A. Verl,et al.  Proactive quality control system for defect reduction in the production of electric drives , 2013, 2013 3rd International Electric Drives Production Conference (EDPC).

[8]  A. Verl,et al.  Defect reduction in the production of electric drives by downstream compensation and space-resolved inspection , 2014, 2014 4th International Electric Drives Production Conference (EDPC).

[9]  Jens Haueisen,et al.  Simultaneous suppression of disturbing fields and localization of magnetic markers by means of multipole expansion , 2004, Biomagnetic research and technology.

[10]  R. Fiser,et al.  Additional Cogging Torque Components in Permanent-Magnet Motors Due to Manufacturing Imperfections , 2009, IEEE Transactions on Magnetics.

[11]  Andreas Stallmach,et al.  Every slow-wave impulse is associated with motor activity of the human stomach. , 2009, American journal of physiology. Gastrointestinal and liver physiology.

[12]  Jörg Franke,et al.  Green Factories Bavaria: A Network of Distributed Learning Factories for Energy Efficient Production , 2015 .

[13]  I. Husain,et al.  Design of experiments to address manufacturing tolerances and process variation influencing cogging torque and back EMF in the mass production of the permanent magnet synchronous motors , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).