Nondestructive characterization of tie-rods by means of dynamic testing, added masses and genetic algorithms

Abstract The structural characterization of tie-rods is crucial for the safety assessments of historical buildings. The main parameters that characterize the behavior of tie-rods are the tensile force, the modulus of elasticity of the material and the rotational stiffness at both restraints. Several static, static–dynamic and pure dynamic nondestructive methods have been proposed in the last decades to identify such parameters. However, none of them is able to characterize all the four mentioned parameters. To fill this gap, in this work a procedure based on dynamic testing, added masses and genetic algorithms (GA) is proposed. The identification is driven by GA where the objective function is a metric of the discrepancy between the experimentally determined (by dynamic impact testing) and the numerically computed (by a fast and reliable finite element formulation) frequencies of vibration of some modified systems obtained from the tie-rod by adding a concentrated mass in specific positions. It is shown by a comprehensive numerical testing campaign in which several cases spanning from short, low-stressed, and almost hinged tie-rods to long, high-tensioned, and nearly clamped tie-rods, that the proposed strategy is reliable in the identification of the four unknowns. Finally, the procedure has been applied to characterize a metallic tie-rod located in Palazzo Paleotti, Bologna (Italy).

[1]  Paolo Bocchini,et al.  Non-destructive parametric system identification and damage detection in truss structures by static tests , 2013 .

[2]  D. R. Huston,et al.  Estimation of axial load in prismatic members using flexural vibrations , 1995 .

[3]  D. E. Goldberg,et al.  Genetic Algorithms in Search , 1989 .

[4]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[5]  Jamshid Ghaboussi,et al.  Genetic algorithm in structural damage detection , 2001 .

[6]  Marco Amabili,et al.  Estimation of tensile force in tie-rods using a frequency-based identification method , 2010 .

[7]  Sergio Lagomarsino,et al.  The dynamical identification of the tensile force in ancient tie-rods , 2005 .

[8]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[9]  Zbigniew Zembaty,et al.  Vibration based stiffness reconstruction of beams and frames by observing their rotations under harmonic excitations — Numerical analysis , 2009 .

[10]  Nerio Tullini,et al.  Dynamic identification of beam axial loads using one flexural mode shape , 2008 .

[11]  A. Bayraktar,et al.  Structural parameter identification of fixed end beams by inverse method using measured natural frequencies , 2008 .

[12]  Sanghyun Choi,et al.  Identification of the tensile force in high-tension bars using modal sensitivities , 2006 .

[13]  Matjaž Skrinar,et al.  On elastic beams parameter identification using eigenfrequencies changes and the method of added mass , 2002 .

[14]  Stefano Sorace,et al.  Parameter models for estimating in-situ tensile force in tie-rods , 1996 .

[15]  Ward Heylen,et al.  Damage Detection by a Real-parameter Hybrid Genetic Algorithm , 2008 .

[16]  Ugo Tonietti,et al.  Experimental Methods for Estimating In Situ Tensile Force in Tie-Rods , 2001 .

[17]  Piervincenzo Rizzo,et al.  Ultrasonic guided waves for nondestructive evaluation/structural health monitoring of trusses , 2010 .

[18]  C. Blasi,et al.  Determining the Axial Force in Metallic Rods , 1994 .