CMOS-compatible surface-micromachined suspended-spiral inductors for multi-GHz silicon RF ICs

Fully CMOS-compatible, highly suspended spiral inductors have been designed and fabricated on standard silicon substrates (1/spl sim/30 /spl Omega//spl middot/cm in resistivity) by surface micromachining technology (no substrate etch involved). The RF characteristics of the fabricated inductors have been measured and their equivalent circuit parameters have been extracted using a conventional lumped-element model. We have achieved a high peak Q-factor of 70 at 6 GHz with inductance of 1.38 nH (at 1 GHz) and a self-resonant frequency of over 20 GHz. To the best of our knowledge, this is the highest Q-factor ever reported on standard silicon substrates. This work has demonstrated that the proposed microelectromechanical systems (MEMS) inductors can be a viable technology option to meet the today's strong demands on high-Q on-chip inductors for multi-GHz silicon RF ICs.

[1]  Euisik Yoon,et al.  3-D lithography and metal surface micromachining for RF and microwave MEMS , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[2]  Songcheol Hong,et al.  A 2.6 GHz low phase-noise VCO monolithically integrated with high Q MEMS inductors , 2002, Proceedings of the 28th European Solid-State Circuits Conference.

[3]  Calvin Plett,et al.  Post-processed Cu inductors with application to a completely integrated 2-GHz VCO , 2001 .

[4]  Han-Su Kim,et al.  Spiral inductors on Si p/p/sup +/ substrates with resonant frequency of 20 GHz , 2001, IEEE Electron Device Letters.

[5]  J. Laskar,et al.  A 2.4 GHz integrated CMOS power amplifier with micromachined inductors , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[6]  Chang Liu,et al.  Development of vertical planar coil inductors using plastic deformation magnetic assembly (PDMA) , 2001, 2001 IEEE MTT-S International Microwave Sympsoium Digest (Cat. No.01CH37157).

[7]  Pasqualina M. Sarro,et al.  IC-compatible two-level bulk micromachining process module for RF silicon technology , 2001 .

[8]  Hongrui Jiang,et al.  On-chip spiral inductors suspended over deep copper-lined cavities , 2000 .

[9]  J. Leclercq,et al.  Micromachined microwave planar spiral inductors and transformers , 2000 .

[10]  E. Yoon,et al.  Monolithic high-Q overhang inductors fabricated on silicon and glass substrates , 1999 .

[11]  E. Yoon,et al.  Surface micromachined solenoid on-Si and on-glass inductors for RF applications , 1999 .

[12]  Euisik Yoon,et al.  High-performance three-dimensional on-chip inductors fabricated by novel micromachining technology for RF MMIC , 1999, IMS 1999.

[13]  M. Allen,et al.  High O spiral-type microinductors on silicon substrates , 1999, IEEE International Magnetics Conference.

[14]  Mark G. Allen,et al.  Surface micromachined solenoid inductors for high frequency applications , 1997 .

[15]  T.H. Lee,et al.  A physical model for planar spiral inductors on silicon , 1996, International Electron Devices Meeting. Technical Digest.

[16]  W. C. Finley,et al.  High Q inductors for wireless applications in a complementary silicon bipolar process , 1994, Proceedings of IEEE Bipolar/BiCMOS Circuits and Technology Meeting.

[17]  H. Greenhouse,et al.  Design of Planar Rectangular Microelectronic Inductors , 1974 .