Critical role of C/SiO2 composite coating in enhancing the mechanical and antioxidation properties of 3D needled carbon fibers

[1]  Jiecai Han,et al.  A novel combination of precursor pyrolysis assisted sintering and rapid sintering for construction of multi-composition coatings to improve ablation resistance of SiOC ceramic modified carbon fiber needled felt preform composites , 2020 .

[2]  S. Suib,et al.  Atmospheric pressure chemical vapor infiltration of a titanium carbide interphase coating on carbon fiber , 2020 .

[3]  K. Reichmann,et al.  Effect of processing conditions on the structural properties and corrosion behavior of TiO2–SiO2 multilayer coatings derived via the sol-gel method , 2020 .

[4]  G. Sáfrán,et al.  Durability of microporous hybrid silica coatings: Optical and wetting properties , 2020 .

[5]  Xiao Xiao,et al.  Development and application of carbon fiber in batteries , 2020 .

[6]  Hyung‐Ho Park,et al.  Hydrophobic TiO2–SiO2 composite aerogels synthesized via in situ epoxy-ring opening polymerization and sol-gel process for enhanced degradation activity , 2020 .

[7]  Jiecai Han,et al.  Precursor infiltration and pyrolysis cycle-dependent microwave absorption and mechanical properties of lightweight and antioxidant carbon fiber felts reinforced silicon oxycarbide composites. , 2020, Journal of colloid and interface science.

[8]  Jiecai Han,et al.  Preparation and properties of SiOC ceramic modified carbon fiber needled felt preform composites , 2020 .

[9]  S. Shen,et al.  Strengthening mechanism of cover glass by Sol‐Gel SiO 2 coating , 2020 .

[10]  Xinghong Zhang,et al.  Constructing hydrothermal carbonization coatings on carbon fibers with controllable thickness for achieving tunable sorption of dyes and oils via a simple heat-treated route. , 2020, Journal of colloid and interface science.

[11]  Yan-xiang Wang,et al.  Formation of C-doped SiO2 coatings on carbon fibers by the sol-dipping process , 2019, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[12]  Xinghong Zhang,et al.  An efficient hydrothermal transformation approach for construction of controllable carbon coating on carbon fiber from renewable carbohydrate , 2019, Applied Surface Science.

[13]  Shaolin Li,et al.  Evaluation of the effect of PyC coating thickness on the mechanical properties of T700 carbon fiber tows , 2019, Applied Surface Science.

[14]  F. Musin,et al.  Preparation of Barrier SiO2 Coating on Carbon Fibers by the Sol-Gel Method , 2019, Materials Today: Proceedings.

[15]  Gang Wang,et al.  Microstructural evolution and performance of carbon fiber-toughened ZrB2 ceramics with SiC or ZrSi2 additive , 2018, Journal of Advanced Ceramics.

[16]  Yuping Zhang,et al.  A Novel Electrolytic Plasma Spraying Preparation SiO2/SiC Coating on Carbon Fiber Fabric , 2018, Coatings.

[17]  S. Suib,et al.  Carbon fiber reinforced ceramic matrix composites with an oxidation resistant boron nitride interface coating , 2018, Ceramics International.

[18]  Jianjun Yang,et al.  Controllable preparation of SiC coating protecting carbon fiber from oxidation damage during sintering process and SiC coated carbon fiber reinforced hydroxyapatite composites , 2018, Applied Surface Science.

[19]  Tie-hu Li,et al.  Two-step method to deposit ZrO2 coating on carbon fiber: Preparation, characterization, and performance in SiC composites , 2018, Ceramics International.

[20]  Zhixiong Huang,et al.  Microstructure and antioxidation performance of SiC-ZrO-MoSi 2 /Ni coated carbon fiber produced by composite electroplating , 2018, Ceramics International.

[21]  Zhihua Yang,et al.  Effects of fiber contents on the mechanical and microwave absorbent properties of carbon fiber felt reinforced geopolymer composites , 2018, Ceramics International.

[22]  Wei Li,et al.  Preparation of boron nitride nanosheet-coated carbon fibres and their enhanced antioxidant and microwave-absorbing properties , 2018, RSC advances.

[23]  G. Amaratunga,et al.  Oxidation protection of carbon fiber by sol-gel derived boron doped yttria stabilized zirconia coatings , 2018 .

[24]  Jiayue Xu,et al.  Fabrication and microstructure of ZrB2–ZrC–SiC coatings on C/C composites by reactive melt infiltration using ZrSi2 alloy , 2018, Journal of Advanced Ceramics.

[25]  Xinghong Zhang,et al.  Preparation and characterization of high-performance ZrB2–SiC–Cf composites sintered at 1450 °C , 2017, Journal of Advanced Ceramics.

[26]  S. Ricart,et al.  Novel Fe3O4@GNF@SiO2 nanocapsules fabricated through the combination of an in situ formation method and SiO2 coating process for magnetic resonance imaging , 2017 .

[27]  M. Debili,et al.  NiO Formation by Simple Air Oxidation of Nickel Coated Carbon Fibers , 2016 .

[28]  Chunxiang Lu,et al.  Improving the oxidation resistance of carbon fibers using silicon oxycarbide coatings , 2015 .

[29]  S. Ghosh,et al.  Role of SiC nanowire coating on oxidation behavior of carbon fibers: Kinetic and thermodynamic study , 2014 .

[30]  B. Jiang,et al.  Sol-gel preparation of hydrophobic silica antireflective coatings with low refractive index by base/acid two-step catalysis. , 2014, ACS applied materials & interfaces.

[31]  Jiecai Han,et al.  Lightweight carbon-bonded carbon fiber composites prepared by pressure filtration technique , 2013 .

[32]  Chunxiang Lu,et al.  Preparation of anti-oxidative SiC/SiO2 coating on carbon fibers from vinyltriethoxysilane by sol–gel method , 2013 .

[33]  F. He,et al.  Direct fabrication of homogeneous microfluidic channels embedded in fused silica using a femtosecond laser. , 2010, Optics letters.

[34]  Plinio Innocenzi,et al.  Structure and properties of sol-gel coatings from methyltriethoxysilane and tetraethoxysilane , 1994 .