Continuous synthesis of drug-loaded nanoparticles using microchannel emulsification and numerical modeling: effect of passive mixing

By using interdigital microfluidic reactors, monodisperse poly(d,l lactic-co-glycolic acid) nanoparticles (NPs) can be produced in a continuous manner and at a large scale (~10 g/h). An optimized synthesis protocol was obtained by selecting the appropriated passive mixer and fluid flow conditions to produce monodisperse NPs. A reduced NP polydispersity was obtained when using the microfluidic platform compared with the one obtained with NPs produced in a conventional discontinuous batch reactor. Cyclosporin, an immunosuppressant drug, was used as a model to validate the efficiency of the microfluidic platform to produce drug-loaded monodisperse poly(d,l lactic-co-glycolic acid) NPs. The influence of the mixer geometries and temperatures were analyzed, and the experimental results were corroborated by using computational fluid dynamic three-dimensional simulations. Flow patterns, mixing times, and mixing efficiencies were calculated, and the model supported with experimental results. The progress of mixing in the interdigital mixer was quantified by using the volume fractions of the organic and aqueous phases used during the emulsification–evaporation process. The developed model and methods were applied to determine the required time for achieving a complete mixing in each microreactor at different fluid flow conditions, temperatures, and mixing rates.

[1]  Jie Li,et al.  Shear-induced rupturing of a viscous drop in a Bingham liquid , 2000 .

[2]  B. Shekunov.  Nanoparticle technology for drug delivery: from nanoparticles to cutting-edge delivery strategies - part II. , 2005, IDrugs : the investigational drugs journal.

[3]  Robert Langer,et al.  Ultra-High Throughput Synthesis of Nanoparticles with Homogeneous Size Distribution Using a Coaxial Turbulent Jet Mixer , 2014, ACS nano.

[4]  Hans P Merkle,et al.  Microencapsulation by solvent extraction/evaporation: reviewing the state of the art of microsphere preparation process technology. , 2005, Journal of controlled release : official journal of the Controlled Release Society.

[5]  E. Bender.  Numerical heat transfer and fluid flow. Von S. V. Patankar. Hemisphere Publishing Corporation, Washington – New York – London. McGraw Hill Book Company, New York 1980. 1. Aufl., 197 S., 76 Abb., geb., DM 71,90 , 1981 .

[6]  Richa Raj,et al.  Numerical Simulations of Liquid−Liquid Flows in Microchannels , 2010 .

[7]  Gerhard Hielscher,et al.  Continuous contact- and contamination-free ultrasonic emulsification-a useful tool for pharmaceutical development and production. , 2006, Ultrasonics sonochemistry.

[8]  Nanoparticle technology for drug delivery: from nanoparticles to cutting-edge delivery strategies - part I. , 2005, IDrugs : the investigational drugs journal.

[9]  Praveen Elamanchili,et al.  Biodegradable Nanoparticle Mediated Antigen Delivery to Human Cord Blood Derived Dendritic Cells for Induction of Primary T Cell Responses , 2003, Journal of drug targeting.

[10]  M. Dziubiński.  Hydrodynamic Focusing in Microfluidic Devices , 2012 .

[11]  V. Préat,et al.  PLGA-based nanoparticles: an overview of biomedical applications. , 2012, Journal of controlled release : official journal of the Controlled Release Society.

[12]  Y. Kawashima,et al.  Prolonged Anti-Inflammatory Action of DL-Lactide/Glycolide Copolymer Nanospheres Containing Betamethasone Sodium Phosphate for an Intra-Articular Delivery System in Antigen-Induced Arthritic Rabbit , 2002, Pharmaceutical Research.

[13]  Antonello Barresi,et al.  CFD modelling and scale-up of Confined Impinging Jet Reactors , 2007 .

[14]  Mokhlesur M. Rahman,et al.  Biodegradable poly(D,L-lactic-co-glycolic acid)-basedmicro/nanoparticles for sustained release of proteindrugs - a review , 2014 .

[15]  T. Park,et al.  G-CSF loaded biodegradable PLGA nanoparticles prepared by a single oil-in-water emulsion method. , 2006, International journal of pharmaceutics.

[16]  M. Ozkan,et al.  Delivery of a peptide via poly(D,L-lactic-co-glycolic) acid nanoparticles enhances its dendritic cell-stimulatory capacity. , 2010, Nanomedicine : nanotechnology, biology, and medicine.

[17]  Katja Bachmeier,et al.  Numerical Heat Transfer And Fluid Flow , 2016 .

[18]  Robert Langer,et al.  Parallel microfluidic synthesis of size-tunable polymeric nanoparticles using 3D flow focusing towards in vivo study. , 2013, Nanomedicine : nanotechnology, biology, and medicine.

[19]  Hélder A. Santos,et al.  A Versatile and Robust Microfluidic Platform Toward High Throughput Synthesis of Homogeneous Nanoparticles with Tunable Properties , 2015, Advanced materials.

[20]  Joanne P Denyer,et al.  Impact of reactor geometry on continuous hydrothermal synthesis mixing , 2010 .

[21]  T. Ishihara,et al.  Treatment of experimental arthritis with poly(d, l-lactic/glycolic acid) nanoparticles encapsulating betamethasone sodium phosphate , 2005, Annals of the rheumatic diseases.

[22]  Robert Langer,et al.  Microfluidic platform for controlled synthesis of polymeric nanoparticles. , 2008, Nano letters.

[23]  Robert Langer,et al.  Microfluidic technologies for accelerating the clinical translation of nanoparticles. , 2012, Nature nanotechnology.

[24]  K. Derakhshandeh,et al.  Encapsulation of 9-nitrocamptothecin, a novel anticancer drug, in biodegradable nanoparticles: factorial design, characterization and release kinetics. , 2007, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[25]  Alicia Fernandez-Fernandez,et al.  Preparation and characterization of a polymeric (PLGA) nanoparticulate drug delivery system with simultaneous incorporation of chemotherapeutic and thermo-optical agents. , 2010, Colloids and surfaces. B, Biointerfaces.

[26]  Christine Jérôme,et al.  Paclitaxel-loaded PEGylated PLGA-based nanoparticles: in vitro and in vivo evaluation. , 2009, Journal of controlled release : official journal of the Controlled Release Society.

[27]  Yoshiaki,et al.  Preparation of poly(DL-lactide-co-glycolide) nanoparticles by modified spontaneous emulsification solvent diffusion method. , 1999, International journal of pharmaceutics.

[28]  Chandan Thomas,et al.  Aerosolized PLA and PLGA nanoparticles enhance humoral, mucosal and cytokine responses to hepatitis B vaccine. , 2011, Molecular pharmaceutics.

[29]  Rubiana M Mainardes,et al.  PLGA nanoparticles containing praziquantel: effect of formulation variables on size distribution. , 2005, International journal of pharmaceutics.

[30]  A. D. Gosman,et al.  The computation of compressible and incompressible recirculating flows by a non-iterative implicit scheme , 1986 .

[31]  Victor Sebastian,et al.  Reaction engineering strategies for the production of inorganic nanomaterials. , 2014, Small.

[32]  B. Ocko,et al.  Modification of deeply buried hydrophobic interfaces by ionic surfactants , 2011, Proceedings of the National Academy of Sciences.

[33]  Yuji Kikuchi,et al.  Regular-sized cell creation in microchannel emulsification by visual microprocessing method , 1997 .

[34]  Robert Langer,et al.  Controlled Delivery Systems for Proteins Based on Poly(Lactic/Glycolic Acid) Microspheres , 1991, Pharmaceutical Research.

[35]  B. P. Leonard,et al.  ULTRA-SHARP Nonoscillatory Convection Schemes for High-Speed Steady Multidimensional Flow , 1990 .

[36]  K. Jensen,et al.  Synthesis of micro and nanostructures in microfluidic systems. , 2010, Chemical Society reviews.

[37]  Do Jin Im,et al.  THREE DIMENSIONAL FLASH FLOW MICROREACTOR FOR SCALE UP PRODUCTION OF MONODISPERSE PEG-PLGA NANOPARTICLES , 2014 .

[38]  Hirofumi Takeuchi,et al.  Size-Dependency of DL-Lactide/Glycolide Copolymer Particulates for Intra-Articular Delivery System on Phagocytosis in Rat Synovium , 2002, Pharmaceutical Research.