A method for the design and fabrication of heterogeneous objects

Layered Manufacturing (LM), also referred to as Solid Freeform Fabrication (SFF), is emerging as a new technology that enables the fabrication of three-dimensional heterogeneous objects. To take full advantage of this capability, a new method to design and fabricate heterogeneous components has to be developed. This paper introduces an integrated design and fabrication system for heterogeneous objects, especially Functionally Graded Materials (FGMs). We first describe the variant design paradigm and a constructive representation scheme for heterogeneous objects. A discretization-based process planning method, which converts continuous material variation into stepwise variation, is then described. Next, Direct Metal Deposition (DMD), a laser-based LM method that can take advantage of the proposed process planning method, is described in detail. Finally, examples are shown to illustrate the entire design-fabrication cycle for heterogeneous objects.

[1]  John O. Milewski,et al.  Properties of near-net shape metallic components made by the directed light fabrication process , 1997 .

[2]  Lawrence H. Bennett,et al.  Binary alloy phase diagrams , 1986 .

[3]  Debasish Dutta,et al.  Constructive Representation of Heterogeneous Objects , 2001, J. Comput. Inf. Sci. Eng..

[4]  M. Cima,et al.  Modeling and designing functionally graded material components for fabrication with local composition control , 1999 .

[5]  Ki-Hoon Shin,et al.  An integrated CAD system for design of heterogeneous objects , 2000 .

[6]  J. Mazumder,et al.  Rapid prototyping by laser cladding , 1993 .

[7]  Debasish Dutta,et al.  An accurate slicing procedure for layered manufacturing , 1996, Comput. Aided Des..

[8]  Aaron Wood,et al.  Representation and design of heterogeneous components , 1999 .

[9]  J. Mazumder,et al.  The direct metal deposition of H13 tool steel for 3-D components , 1997 .

[10]  Vinod Kumar,et al.  Solid modeling and algorithms for heterogeneous objects , 1999 .

[11]  Debasish Dutta,et al.  Adaptive Slicing of Heterogeneous Solid Models for Layered Manufacturing , 1999 .

[12]  Debasish Dutta,et al.  Process-Planning for Layered Manufacturing of Heterogeneous Objects Using Direct Metal Deposition , 2002, J. Comput. Inf. Sci. Eng..

[13]  Mark R. Cutkosky,et al.  Representation of heterogeneous objects during design, processing and freeform-fabrication , 2001 .

[14]  V. Kumar,et al.  An Approach to Modeling & Representation of Heterogeneous Objects , 1998 .

[15]  R. Merz,et al.  Shape Deposition Manufacturing , 1994 .

[16]  M. Cima,et al.  Production of injection molding tooling with conformal cooling channels using the three dimensional printing process , 2000 .

[17]  M. L. Griffith,et al.  Multi-Material Processing By Lens , 1997 .

[18]  S. Ashley,et al.  Rapid prototyping systems , 1991 .

[19]  H. Wu,et al.  Distributed Design and Fabrication of Parts with Local Composition Control , 1999 .

[20]  Subra Suresh,et al.  Functionally graded metals and metal-ceramic composites: Part 2 Thermomechanical behaviour , 1997 .

[21]  John R. Fessler,et al.  Functional Gradient Metallic Prototypes through Shape Deposition Manufacturing , 1997 .

[22]  M. Bendsøe,et al.  Generating optimal topologies in structural design using a homogenization method , 1988 .