Biomimetic strain-sensing microstructure for improved strain sensor: fabrication results and optical characterization

This paper describes the fabrication, and early optical characterization results of a new biomimetic strain-sensing microstructure. The microstructures were inspired from the campaniform sensillum, a highly sensitive strain sensor found in the exocuticle layer of insects. We investigate the natural strain-sensor characteristics by mimicking some of its simplest structural features. Blind-hole- and membrane-structural features were combined and fabricated as membrane-in-recess microstructure. To investigate the strain-sensing (or strain-amplifying) property of the microstructure, an optical characterization setup was devised based on the interference pattern formed by reflected laser beams from different surfaces of the microstructures. Preliminary qualitative analysis of the results obtained shows unsimilar intensity level changes as a function of spatial location on the membrane, thus indicated the biomimetic microstructure's strain-amplifying property. This property could be utilized for future improvement of currently available planar-based conventional strain sensors.

[1]  L. Hood,et al.  Reverse Engineering of Biological Complexity , 2007 .

[2]  J. Doyle,et al.  Reverse Engineering of Biological Complexity , 2002, Science.

[3]  S. Zill,et al.  Exoskeletal sensors for walking , 1996 .

[4]  U. Grünert,et al.  Campaniform sensilla of Calliphora vicina (Insecta, Diptera) , 1987, Zoomorphology.

[5]  Y Su,et al.  Automatic classification of singular elements for the electrostatic analysis of microelectromechanical systems , 2002 .

[6]  Cengiz S. Ozkan,et al.  High sensitivity piezoresistive cantilever design and optimization for analyte-receptor binding , 2003 .

[7]  G. Jeronimidis,et al.  A novel strain sensor based on the campaniform sensillum of insects , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[8]  A.-R. A. Khaleda,et al.  Analysis , control and augmentation of microcantilever deflections in bio-sensing systems , 2003 .

[9]  Pasqualina M. Sarro,et al.  Temperature influence on etching deep holes with SF6/O2 cryogenic plasma , 2002 .

[10]  E. V. D. Drift,et al.  Kinetics and crystal orientation dependence in high aspect ratio silicon dry etching , 2000 .

[11]  D. Polla,et al.  Experimental evaluation of MEMS strain sensors embedded in composites , 1999 .

[12]  F. Barth,et al.  Sensors and Sensing in Biology and Engineering , 2003, Springer Vienna.

[13]  Philip Ball,et al.  Life's lessons in design , 2001, Nature.

[14]  Rashid Bashir,et al.  On the design of piezoresistive silicon cantilevers with stress concentration regions for scanning probe microscopy applications , 2000 .

[15]  Cengiz S. Ozkan,et al.  Analysis, control and augmentation of microcantilever deflections in bio-sensing systems , 2003 .

[16]  Susan C. Mantell,et al.  Simulation and fabrication of piezoresistive membrane type MEMS strain sensors , 2000 .

[17]  Gregory Pandraud,et al.  Simple optical characterisation for biomimetic micromachined silicon strain-sensing structure , 2005, International Conference on Experimental Mechanics.

[18]  J. Vincent,et al.  Systematic technology transfer from biology to engineering , 2002, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.