Laser fabrication of high aspect ratio thin holes on biodegradable polymer and its application to a microneedle

The present paper reports the fabrication of long thin holes with a high aspect ratio of 100 (diameter: 10 μm, depth: 1 mm) in biodegradable polymer material (polylactic acid, referred to herein as PLA) using a UV excimer laser. Holes having diameters of 10, 20 and 50 μm are fabricated from the side surface of a PLA sheet, and their fabricated shapes are observed using an optical microscope. These holes are compared with holes fabricated in other polymer sheets. It is proven that a long thin hole can be fabricated in PLA material, although at a lower fabrication rate compared that for epoxy material. This laser fabrication is applied to a PLA microneedle, which is fabricated by the micromolding technique. A hole is fabricated along the centerline of the newly developed microneedle, and it is confirmed experimentally that blood plasma is taken into this hole by capillary force.

[1]  Yong-Kyu Yoon,et al.  Micromachined biodegradable microstructures , 2003, The Sixteenth Annual International Conference on Micro Electro Mechanical Systems, 2003. MEMS-03 Kyoto. IEEE.

[2]  In-Plane, Hollow Microneedles Via Polymer Investment Molding , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[3]  M. Allen,et al.  Fabrication and characterization of laser micromachined hollow microneedles , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[4]  Jin-Woo Choi,et al.  A new laser micromachining technique using a mixed-mode ablation approach , 2002, Technical Digest. MEMS 2002 IEEE International Conference. Fifteenth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.02CH37266).

[5]  M. Allen,et al.  An electrically active microneedle array for electroporation of skin for gene delivery , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[6]  Fabrication and characterization of 3D aspheric microlenses with arbitrary surface profiles based on a novel excimer laser contour scanning method , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[7]  R. Shafer,et al.  Highly inclined electrodeposited metal lines using an excimer laser patterning technique , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[8]  N.F. de Rooij,et al.  A modular high density multi-channel dispenser for micro-array printing , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[9]  K.P. Pullen,et al.  Design, fabrication and characterization of an axial-flow turbine for flow sensing , 2003, TRANSDUCERS '03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No.03TH8664).

[10]  Xianfan Xu,et al.  Laser-Based Fabrication of Polymer Micro-Fluidic Devices , 2004 .

[11]  A. Holmes,et al.  Sacrificial layer process with laser-driven release for batch assembly operations , 1998 .

[12]  O. Tabata,et al.  Prediction Method of 3-D Shape Fabricated by Double Exposure Technique in Deep X-Ray Lithography (D2XRL) , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.

[13]  S. Aoyagi,et al.  Development of a micro lancet needle made of biodegradable polymer for low-invasive medical treatment , 2005, The 13th International Conference on Solid-State Sensors, Actuators and Microsystems, 2005. Digest of Technical Papers. TRANSDUCERS '05..

[14]  Steven A. Soper,et al.  Design of a Microfabricated Device for the Ligase Detection Reaction (LDR) , 2004 .

[15]  Hiroyuki Fujita,et al.  Fabrication of a Micro Needle for a Trace Blood Test , 2002 .

[16]  O. Tabata,et al.  Fabrication of Plastic Micro Tip Array using Laser Micromachining of Nanoparticles Dispersed Polymer and Micromolding , 2006 .

[17]  S. Aoyagi,et al.  Biodegradable Polymer Needle Having a Trench for Collecting Blood by Capillary Force , 2006, 19th IEEE International Conference on Micro Electro Mechanical Systems.