An Evaluation of Jet Impingement Heat Transfer Correlations for Piccolo Tube Application

ABSTRACT Greek Letters Impinging jets have been used for a wide variety of applications where high rates of heat transfer are desired. This report will present a review of heat transfer correlations that have been published. The correlations were then added to the LEWICE software to evaluate the applicability of these correlations to a piccolo tube anti-icing system. The results of this analysis were then compared quantitatively to test results on a representative piccolo tube system. NOMENCLATURE A Area ratio (dimensionless) c chord (m) c n spanwise distance between holes (m) c x chordwise distance between holes (m) C p heat capacity (kJ/kgK) d jet hole diameter (m) D diameter of semi-cylinder (m) G mass flux (kg/m 2 s) h Heat transfer coefficient (kW/m 2 K) k Thermal conductivity (kW/mK) m  Mass flow rate per unit span (kg/ms) N r Number of jet rows Nu Nusselt number = hdk a Nu average Nusselt number q" Heat flux (kW/m 2 ) Pr Prandtl number = C p µ a k a leading edge through small holes drilled in a pipe. Ice r radial distance from hole (m) Re Reynolds number

[1]  Mohamed S. El-Genk,et al.  Heat transfer of an impinging jet on a flat surface , 1994 .

[2]  R. J. Goldstein,et al.  Streamwise distribution of the recovery factor and the local heat transfer coefficient to an impinging circular air jet , 1986 .

[3]  B. L. Button,et al.  A review of heat transfer data for single circular jet impingement , 1992 .

[4]  Raymond Viskanta,et al.  Effect of jet-jet spacing on convective heat transfer to confined, impinging arrays of axisymmetric air jets , 1994 .

[5]  B. R. Hollworth,et al.  Heat Transfer From Arrays of Impinging Jets with Large Jet-to-Jet Spacing , 1978 .

[6]  P. Hrycak,et al.  Heat transfer from a row of impinging jets to concave cylindrical surfaces , 1981 .

[7]  Richard J Goldstein,et al.  Heat transfer to a row of impinging circular air jets including the effect of entrainment , 1991 .

[8]  William B. Wright,et al.  Users manual for the improved NASA Lewis ice accretion code LEWICE 1.6 , 1995 .

[9]  S. Polat,et al.  Confined multiple impinging slot jets without crossflow effects , 1992 .

[10]  J. Sullivan,et al.  Laser Spot Heating / Temperature-Sensitive Paint Heat Transfer Measurements , 1998 .

[11]  John Watterson,et al.  Heat transfer correlation for anti-icing systems , 2002 .

[12]  C. Solliec,et al.  A turbulent plane jet impinging nearby and far from a flat plate , 2001 .

[13]  Koichi Ichimiya,et al.  Heat transfer characteristics of an annular turbulent impinging jet with a confined wall measured by thermosensitive liquid crystal , 2003 .

[14]  Ephraim M Sparrow,et al.  Heat Transfer Characteristics of an Obliquely Impinging Circular Jet , 1980 .

[15]  W. B. Wright,et al.  User's manual for the NASA Lewis ice accretion/heat transfer prediction code with electrothermal deicer input , 1994 .

[16]  H. Martin.  Heat and Mass Transfer between Impinging Gas Jets and Solid Surfaces , 1977 .

[17]  Kengo Sasaguchi,et al.  Effect of the orientation of a finned surface on the melting of frozen porous media , 1994 .

[18]  John P. Sullivan,et al.  Application of temperature and pressure sensitive paint to an obliquely impinging jet , 1999 .

[19]  Chie Gau,et al.  Surface Curvature Effect on Slot-Air-Jet Impingement Cooling Flow and Heat Transfer Process , 1991 .

[20]  L. Tang,et al.  A comprehensive numerical study of jet flow impingement over flat plates at varied angles , 2001 .

[21]  C. R. Truman,et al.  Jet array impingement with crossflow-correlation of streamwise resolved flow and heat transfer distributions , 1981 .

[22]  A. A. Tawfek,et al.  Heat transfer and pressure distributions of an impinging jet on a flat surface , 1996 .

[23]  A. A. Tawfek,et al.  Heat transfer studies of the oblique impingement of round jets upon a curved surface , 2002 .