Shape Memory Alloy Morphing Airfoil Sections

Shape memory alloys (SMA) provide common solid state actuators with reliable and unique characteristics. Their special behavior is based on a reversible phase transformation and can provide high power density, induced strain and block force which render them indispensable for use in morphing structures that require large shape changes while space and weight restrictions are imposed. Yet, their implementation into morphing structures faces challenges related to their complex multi-disciplinary behavior, their interaction with the passive structural components, geometrical nonlinearity due to large shape changes, the lack of experimental data, and above all, the lack of modelling tools which can robustly simulate the complex thermomechanical behavior and make feasible their design. We briefly review the material characterization process, the developed modelling tools which can simulate the complex thermomechanical response of morphing structures with SMA actuators which can undergo large shape changes under severe geometric nonlinearity, and the testing of prototype morphing components. The design and validation of two morphing structural concepts for curvature control are presented. A morphing strip capable to deform towards a single target shape is initially presented. Subsequently, a morphing airfoil concept implementing an articulated mechanism capable to achieve multiple target shapes for aerodynamic load control is presented. The challenging task to continuously adapt the structural shape to time varying demands, dictates the use of antagonistic actuator configurations to maximize and control the range of morphing. The previously mentioned morphing airfoil configuration is used to alleviate the aerodynamic fatigue loads in wind turbine blades and aircraft wings.

[1]  Theodoros T Machairas,et al.  A coupled layered thermomechanical shape memory alloy beam element with enhanced higher order temperature field approximations , 2016 .

[2]  Theodoros T Machairas,et al.  A coupled thermomechanical beam finite element for the simulation of shape memory alloy actuators , 2014 .

[3]  Shaker A. Meguid,et al.  Bio-inspired wing morphing for unmanned aerial vehicles using intelligent materials , 2012 .

[4]  U. Icardi,et al.  Preliminary study of an adaptive wing with shape memory alloy torsion actuators , 2009 .

[5]  D. M. Elzey,et al.  Two-way Antagonistic Shape Actuation Based on the One-way Shape Memory Effect , 2008 .

[6]  Robert T. Ruggeri,et al.  Wind Tunnel Testing of a Lightweight One-Quarter-Scale Actuator Utilizing Shape Memory Alloy , 2008 .

[7]  I. Bond,et al.  Morphing skins , 2008, The Aeronautical Journal (1968).

[8]  D. Lagoudas.  Shape memory alloys : modeling and engineering applications , 2008 .

[9]  Gangbing Song,et al.  Robust control of a shape memory alloy wire actuated flap , 2007 .

[10]  L. Brinson,et al.  A three-dimensional phenomenological model for martensite reorientation in shape memory alloys , 2007 .

[11]  T. P. G. Thamburaja.  Constitutive equations for martensitic reorientation and detwinning in shape-memory alloys , 2005 .

[12]  D. M. Elzey,et al.  A bio-inspired high-authority actuator for shape morphing structures , 2003, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[13]  Christopher A. Martin,et al.  Contributions of the NASA Langley Research Center to the DARPA/AFRL/NASA/ Northrop Grumman Smart Wing Program , 2003 .

[14]  Dimitris C. Lagoudas,et al.  Fabrication and testing of a shape memory alloy actuated reconfigurable wing , 2002, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  J. Shaw.  A thermomechanical model for a 1-D shape memory alloy wire with propagating instabilities , 2002 .

[16]  Ramesh Chandra,et al.  Active shape control of composite blades using shape memory actuation , 2001 .

[17]  Inderjit Chopra,et al.  Design of a variable twist tilt-rotor blade using shape memory alloy (SMA) actuators , 2001, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[18]  E. Sacco,et al.  Thermo-mechanical modelling of a superelastic shape-memory wire under cyclic stretching–bending loadings , 2001 .

[19]  Jonathan D. Bartley-Cho,et al.  Design and fabrication of Smart Wing wind tunnel model and SMA control surfaces , 1999, Smart Structures.

[20]  Inderjit Chopra,et al.  In-flight tracking of helicopter rotor blades using shape memory alloy actuators , 1999 .

[21]  C. Lexcellent,et al.  Thermodynamics of isotropic pseudoelasticity in shape memory alloys , 1998 .

[22]  F. Auricchio,et al.  Generalized plasticity and shape-memory alloys , 1996 .

[23]  D. Lagoudas,et al.  A thermodynamical constitutive model for shape memory materials. Part I. The monolithic shape memory alloy , 1996 .

[24]  L. Brinson.  One-Dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-Constant Material Functions and Redefined Martensite Internal Variable , 1993 .

[25]  C. Liang,et al.  A multi-dimensional constitutive model for shape memory alloys , 1992 .

[26]  Craig A. Rogers,et al.  One-Dimensional Thermomechanical Constitutive Relations for Shape Memory Materials , 1990 .

[27]  M. Achenbach.  A model for an alloy with shape memory , 1989 .

[28]  K. Tanaka.  A THERMOMECHANICAL SKETCH OF SHAPE MEMORY EFFECT: ONE-DIMENSIONAL TENSILE BEHAVIOR , 1986 .