Loss Model and Efficiency Analysis of Tram Auxiliary Converter Based on a SiC Device

Currently, the auxiliary converter in the auxiliary power supply system of a modern tram adopts Si IGBT as its switching device and with the 1700 V/225 A SiC MOSFET module commercially available from Cree, an auxiliary converter using all SiC devices is now possible. A SiC auxiliary converter prototype is developed during this study. The author(s) derive the loss calculation formula of the SiC auxiliary converter according to the system topology and principle and each part loss in this system can be calculated based on the device datasheet. Then, the static and dynamic characteristics of the SiC MOSFET module used in the system are tested, which aids in fully understanding the performance of the SiC devices and provides data support for the establishment of the PLECS loss simulation model. Additionally, according to the actual circuit parameters, the PLECS loss simulation model is set up. This simulation model can simulate the actual operating conditions of the auxiliary converter system and calculate the loss of each switching device. Finally, the loss of the SiC auxiliary converter prototype is measured and through comparison it is found that the loss calculation theory and PLECS loss simulation model is valuable. Furthermore, the thermal images of the system can prove the conclusion about loss distribution to some extent. Moreover, these two methods have the advantages of less variables and fast calculation for high power applications. The loss models may aid in optimizing the switching frequency and improving the efficiency of the system.

[1]  Subhashish Bhattacharya,et al.  High-frequency design considerations of dual active bridge 1200 V SiC MOSFET DC-DC converter , 2011, 2011 Twenty-Sixth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[2]  Elias Ayana,et al.  High-frequency split-phase air-cooled SiC inverter for vehicular power generators , 2015, 2015 IEEE Transportation Electrification Conference and Expo (ITEC).

[3]  Jae Seung Lee,et al.  A High-Density, High-Efficiency, Isolated On-Board Vehicle Battery Charger Utilizing Silicon Carbide Power Devices , 2014, IEEE Transactions on Power Electronics.

[4]  D. Boroyevich,et al.  A 1200-V, 60-A SiC MOSFET Multichip Phase-Leg Module for High-Temperature, High-Frequency Applications , 2014, IEEE Transactions on Power Electronics.

[5]  Subhashish Bhattacharya,et al.  Design Considerations and Performance Evaluation of 1200-V 100-A SiC MOSFET-Based Two-Level Voltage Source Converter , 2016, IEEE Transactions on Industry Applications.

[6]  T. Funaki,et al.  A study on the high frequency operation of DC-DC converter with SiC DMOSFET , 2010, The 2010 International Power Electronics Conference - ECCE ASIA -.

[7]  Subhashish Bhattacharya,et al.  Characterization of 15 kV SiC n-IGBT and its application considerations for high power converters , 2013, 2013 IEEE Energy Conversion Congress and Exposition.

[8]  Andrew J. Forsyth,et al.  Evaluation of SiC BJTs for High-Power DC–DC Converters , 2014, IEEE Transactions on Power Electronics.

[9]  Ki-Bum Park,et al.  Auxiliary power supply for LV inverter with 1700 V SiC switch , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[10]  Johnny Bou Saada,et al.  Compact three phase inverter in Silicon Carbide technology for auxiliary converter used in railway applications , 2013, 2013 15th European Conference on Power Electronics and Applications (EPE).

[11]  Dario Zaninelli,et al.  Application prospective of Silicon Carbide (SiC) in railway vehicles , 2014, 2014 AEIT Annual Conference - From Research to Industry: The Need for a More Effective Technology Transfer (AEIT).

[12]  Wenhua Liu,et al.  Dead-Time Effect of the High-Frequency Isolated Bidirectional Full-Bridge DC–DC Converter: Comprehensive Theoretical Analysis and Experimental Verification , 2014, IEEE Transactions on Power Electronics.

[13]  Qin Haihong,et al.  Characteristics of SiC MOSFET and its application in a phase-shift full-bridge converter , 2016, 2016 IEEE 8th International Power Electronics and Motion Control Conference (IPEMC-ECCE Asia).

[14]  E. Santi,et al.  Analytical loss model for power converters with SiC MOSFET and SiC schottky diode pair , 2015, 2015 IEEE Energy Conversion Congress and Exposition (ECCE).

[15]  Jimmy Liu,et al.  Efficient and Compact 50kW Gen2 SiC Device Based PV String Inverter , 2014 .

[16]  Bulent Sarlioglu,et al.  Achieving high efficiency using SiC MOSFETs and reduced output filter for grid-connected V2G inverter , 2015, IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society.

[17]  Jun Wang,et al.  Characterization, Modeling, and Application of 10-kV SiC MOSFET , 2008, IEEE Transactions on Electron Devices.

[18]  Jiawei Cheng,et al.  Impact of Silicon Carbide Devices on the Powertrain Systems in Electric Vehicles , 2017 .

[19]  D. Boroyevich,et al.  A 1200 V, 60 A SiC MOSFET multi-chip phase-leg module for high-temperature, high-frequency applications , 2013, 2013 Twenty-Eighth Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[20]  V. Agarwal,et al.  SiC based Buck Boost Converter , 2007, 2007 International Power Engineering Conference (IPEC 2007).

[21]  H. Akagi,et al.  Power-Loss Breakdown of a 750-V 100-kW 20-kHz Bidirectional Isolated DC–DC Converter Using SiC-MOSFET/SBD Dual Modules , 2015, IEEE Transactions on Industry Applications.

[22]  Zheyu Zhang,et al.  Overview of Silicon Carbide Technology: Device, Converter, System, and Application , 2016 .

[23]  Huiqing Wen,et al.  Estimating power losses in Dual Active Bridge DC-DC converter , 2011, 2011 2nd International Conference on Electric Power and Energy Conversion Systems (EPECS).

[24]  Alex Q. Huang,et al.  Comparisons of 6.5kV 25A Si IGBT and 10-kV SiC MOSFET in Solid-State Transformer application , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[25]  S. Bhattacharya,et al.  Comparison study of 12kV n-type SiC IGBT with 10kV SiC MOSFET and 6.5kV Si IGBT based on 3L-NPC VSC applications , 2012, 2012 IEEE Energy Conversion Congress and Exposition (ECCE).

[26]  Hans-Peter Nee,et al.  Parallel-Operation of Discrete SiC BJTs in a 6-kW/250-kHz DC/DC Boost Converter , 2014, IEEE Transactions on Power Electronics.