Improved energy efficiency in debottlenecking using a fully thermally coupled distillation column

Increasing the throughput of an existing distillation process has received considerable attention due to the higher market demand for products derived therefrom. However, this could create a bottleneck in the column. The main objective of this work is to systematically identify bottlenecks in distillation columns and propose a strategy related to dividing wall column (DWC) use for debottlenecking within the column, as well as for energy saving. To optimize the DWC, the internal recycle flow distribution around the dividing wall was investigated as a primary optimizing variable. Several cases were analyzed to show that use of the DWC is a promising method for debottlenecking, as well as investment cost and energy consumption saving. Copyright © 2011 Curtin University of Technology and John Wiley & Sons, Ltd.

[1]  Iván D. Gil,et al.  Extractive Distillation of Acetone/Methanol Mixture Using Water as Entrainer , 2009 .

[2]  Ikuho Yamada,et al.  Analysis of Divided-Wall Column for Extractive Distillation. , 2000 .

[3]  Ignacio E. Grossmann,et al.  Systematic Methods of Chemical Process Design , 1997 .

[4]  Megan Jobson,et al.  Retrofit Design for Increasing the Processing Capacity of Distillation Columns: 1. A Hydraulic Performance Indicator , 2004 .

[5]  K. A. Amminudin,et al.  Design and Optimization of Fully Thermally Coupled Distillation Columns: Part 2: Application of Dividing Wall Columns in Retrofit , 2001 .

[6]  Nguyen Van Duc Long,et al.  Design and optimization of a dividing wall column for debottlenecking of the acetic acid purification process , 2010 .

[7]  Moonyong Lee,et al.  Study of the structural characteristics of a divided wall column using the sloppy distillation arrangement , 2011 .

[8]  K. A. Amminudin,et al.  Design and Optimization of Fully Thermally Coupled Distillation Columns: Part 1: Preliminary Design and Optimization Methodology , 2001 .

[9]  J. Tojo,et al.  Vapor−Liquid Equilibria for the Ternary System Acetone + Methanol + Water at 101.325 kPa , 1999 .

[10]  Salvador Hernández,et al.  Design and Energy Performance of Alternative Schemes to the Petlyuk Distillation System , 2003 .

[11]  P. Miguel,et al.  Isobaric vapor-liquid equilibria for acetone + methanol + lithium nitrate at 100 kPa , 2006 .

[12]  Johann Stichlmair,et al.  Minimaler Energiebedarf von Trennwandkolonnen , 2004 .

[13]  William L. Luyben,et al.  Comparison of Extractive Distillation and Pressure-Swing Distillation for Acetone-Methanol Separation , 2008 .

[14]  William L. Luyben,et al.  New Control Structure for Divided-Wall Columns , 2009 .

[15]  Michael F. Malone,et al.  Design of Sidestream Distillation Columns , 1985 .

[16]  Sigurd Skogestad,et al.  Minimum Energy Consumption in Multicomponent Distillation. 2. Three-Product Petlyuk Arrangements , 2003 .

[17]  Sigurd Skogestad,et al.  Optimal operation of Petlyuk distillation: steady-state behavior , 1999 .

[18]  Gade Pandu Rangaiah,et al.  Retrofitting conventional column systems to dividing-Wall Columns , 2009 .

[19]  Dale F. Rudd,et al.  Parametric studies in industrial distillation: Part I. Design comparisons , 1978 .

[20]  Peter Lang,et al.  Batch extractive distillation as a hybrid process : separation of minimum boiling azeotropes , 2007 .

[21]  A. N. Kuzyukov,et al.  Corrosion resistance of zirconium alloys in acetic acid media , 1995 .

[22]  John R. Griswold,et al.  Separation of Synthesis Mixtures Vapor-Liquid Equilibria of Acetone-Methanol-Water , 1949 .

[23]  L. Verhoeye,et al.  The vapour—liquid equilibria of the binary, ternary and quaternary systems formed by acetone, methanol, propan-2-ol, and water , 2007 .

[24]  G. Kaibel,et al.  Dividing wall columns: Fundamentals and recent advances , 2010 .

[25]  Sigurd Skogestad,et al.  Operation of Integrated Three-Product (Petlyuk) Distillation Columns , 1995 .

[26]  Ljubica Matijašević,et al.  Dividing wall column—A breakthrough towards sustainable distilling , 2010 .