Stiffness Analysis of Cable-Driven Parallel Robots

Thesis (Ph.D, Mechanical and Materials Engineering) -- Queen's University, 2013-04-27 08:47:26.297

[1]  Vijay Kumar,et al.  Affine connections for the Cartesian stiffness matrix , 1997, Proceedings of International Conference on Robotics and Automation.

[2]  Scott B. Nokleby,et al.  Force-Moment Capabilities of Redundantly-Actuated Planar-Parallel Architectures , 2007 .

[3]  Mustafa Shabbir Kurbanhusen,et al.  Force-closure workspace analysis of cable-driven parallel mechanisms , 2006 .

[4]  J. Salisbury,et al.  Active stiffness control of a manipulator in cartesian coordinates , 1980, 1980 19th IEEE Conference on Decision and Control including the Symposium on Adaptive Processes.

[5]  Claudio Melchiorri,et al.  WireMan: a portable wire manipulator for touch-rendering of bas-relief virtual surfaces , 1997, 1997 8th International Conference on Advanced Robotics. Proceedings. ICAR'97.

[6]  S. Nokleby,et al.  Force capabilities of redundantly-actuated parallel manipulators , 2005 .

[7]  Yung Ting,et al.  A control structure for fault-tolerant operation of robotic manipulators , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[8]  Daniel E. Whitney,et al.  Quasi-Static Assembly of Compliantly Supported Rigid Parts , 1982 .

[9]  Marc Arsenault,et al.  Stiffness Analysis of a 2DOF Planar Tensegrity Mechanism , 2011 .

[10]  Carlo Ferraresi,et al.  A force-feedback six-degrees-of-freedom wire-actuated master for teleoperation: the WiRo-6.3 , 2007, Ind. Robot.

[11]  Robert L. Williams.  CABLE-SUSPENDED HAPTIC INTERFACE , 1998 .

[12]  Clément Gosselin,et al.  Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..

[13]  Sadao Kawamura,et al.  High-speed manipulation by using parallel wire-driven robots , 2000, Robotica.

[14]  Sadao Kawamura,et al.  Development of an Ultrahigh Speed Robot FALCON Using Parallel Wire Drive Systems , 1997 .

[15]  Y. Shen,et al.  Set of manipulating forces in wire driven systems , 1994, Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94).

[16]  Takashi Suehiro,et al.  Stiffness Analysis and Design of a Compact Modified Delta Parallel Mechanism , 2004, Robotica.

[17]  L. W. Tsai,et al.  Robot Analysis: The Mechanics of Serial and Parallel Ma-nipulators , 1999 .

[18]  Leila Notash,et al.  Investigation of Wire Failure Effect on Stiffness Maps of Planar Wire-Actuated Parallel Manipulators , 2010 .

[19]  Whee Kuk Kim,et al.  Analysis for a planar 3 degree-of-freedom parallel mechanism with actively adjustable stiffness characteristics , 1997, Proceedings of International Conference on Robotics and Automation.

[20]  Keith L. Doty,et al.  A Theory of Generalized Inverses Applied to Robotics , 1993, Int. J. Robotics Res..

[21]  Imin Kao,et al.  Conservative Congruence Transformation for Joint and Cartesian Stiffness Matrices of Robotic Hands and Fingers , 2000, Int. J. Robotics Res..

[22]  Clément Gosselin,et al.  Stiffness Analysis of 3-RPR Planar Parallel Mechanism to the Stiffness Control , 2009 .

[23]  Yoon Keun Kwak,et al.  Kinematics and Workspace Analysis of a Parallel Wire Mechanism for Measuring a Robot Pose , 1999 .

[24]  Clément Gosselin,et al.  Parametric Stiffness Analysis of the Orthoglide , 2004, ArXiv.

[25]  J. Loncaric.  Geometrical analysis of compliant mechanisms in robotics (euclidean group, elastic systems, generalized springs , 1985 .

[26]  Zhiwei Luo,et al.  On the stiffness and stiffness control of redundant manipulators , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[27]  Imin Kao,et al.  Robotic stiffness control and calibration as applied to human grasping tasks , 1997, IEEE Trans. Robotics Autom..

[28]  F. Dimentberg.  The screw calculus and its applications in mechanics , 1968 .

[29]  吉川 恒夫,et al.  Foundations of robotics : analysis and control , 1990 .

[30]  C. Gosselin,et al.  On the Ability of a Cable-Driven Robot to Generate a Prescribed Set of Wrenches , 2008 .

[31]  Clément Gosselin,et al.  Stiffness Matrix of Compliant Parallel Mechanisms , 2008 .

[32]  Derek McColl,et al.  WORKSPACE GENERATION FOR WIRE-ACTUATED PARALLEL MANIPULATORS , 2009 .

[33]  Manfred Hiller,et al.  On design of a redundant wire-driven parallel robot WARP manipulator , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[34]  Scott B. Nokleby,et al.  Wrench capability analysis of redundantly actuated spatial parallel manipulators , 2009 .

[35]  Van-Duc Nguyen,et al.  Constructing Stable Grasps , 1989, Int. J. Robotics Res..

[36]  J. Angeles,et al.  The stiffness matrix in elastically articulated rigid-body systems , 2007 .

[37]  Shuguang Huang,et al.  The bounds and realization of spatial stiffnesses achieved with simple springs connected in parallel , 1998, IEEE Trans. Robotics Autom..

[38]  James S. Albus,et al.  The NIST robocrane , 1993, J. Field Robotics.

[39]  Sunil K. Agrawal,et al.  Cable suspended robots: design, planning and control , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[40]  Marc Arsenault.  Stiffness Analysis of a Planar 2-DoF Cable-Suspended Mechanism While Considering Cable Mass , 2013 .

[41]  F. Bekes,et al.  Motion control of a tendon-based parallel manipulator using optimal tension distribution , 2004, IEEE/ASME Transactions on Mechatronics.

[42]  Guilin Yang,et al.  Workspace analysis of fully restrained cable-driven manipulators , 2009, Robotics Auton. Syst..

[43]  Sunil K. Agrawal,et al.  A Dual-Stage Planar Cable Robot: Dynamic Modeling and Design of A Robust Controller with Positive Inputs , 2005 .

[44]  Joseph James Duffy,et al.  Stiffness mappings employing different frames of reference , 1998 .

[45]  Maryam Agahi,et al.  Redundancy Resolution of Cable-Driven Parallel Manipulators , 2012 .

[46]  Underconstrained planar cable-direct-driven robots: A trajectory planning method ensuring positive and bounded cable tensions , 2010 .

[47]  C. J. Thompson,et al.  Charlotte™ Robot Technology for Space and Terrestrial Applications , 1995 .

[49]  Sunil K. Agrawal,et al.  On the Design of Cable-Suspended Planar Parallel Robots , 2005 .

[50]  Guilin Yang,et al.  Workspace analysis and optimal design of cable-driven planar parallel manipulators , 2004, IEEE Conference on Robotics, Automation and Mechatronics, 2004..

[51]  C. Gosselin,et al.  Determination of the Dynamic Workspace of Cable-Driven Planar Parallel Mechanisms , 2005 .

[52]  Van-Duc Nguyen,et al.  Constructing force-closure grasps , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[53]  Sébastien Krut,et al.  Force performance indexes for parallel mechanisms with actuation redundancy, especially for parallel wire-driven manipulators , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[54]  Joseph Duffy,et al.  Global stiffness modeling of a class of simple compliant couplings , 1993 .

[55]  Imin Kao,et al.  Grasp stiffness matrix-fundamental properties in analysis of grasping and manipulation , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[56]  Imme Ebert-Uphoff,et al.  Wrench-feasible workspace generation for cable-driven robots , 2006, IEEE Transactions on Robotics.

[57]  Imme Ebert-Uphoff,et al.  Disturbance robustness measures and wrench-feasible workspace generation techniques for cable-driven robots , 2004 .

[58]  Rodney G. Roberts,et al.  On the inverse kinematics, statics, and fault tolerance of cable‐suspended robots , 1998 .

[59]  Sunil K. Agrawal,et al.  On the Design of Adaptive Cable-Driven Systems , 2011 .

[60]  Imme Ebert-Uphoff,et al.  Wrench-based analysis of cable-driven robots , 2004, IEEE International Conference on Robotics and Automation, 2004. Proceedings. ICRA '04. 2004.

[61]  Leila Notash,et al.  Retrieving Lost Stiffness of Planar Wire-Actuated Parallel Manipulators after Failure , 2011 .

[62]  Masaru Uchiyama,et al.  On the stiffness and stability of Gough-Stewart platforms , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[63]  Placid Mathew Ferreira,et al.  Computation of stiffness and stiffness bounds for parallel link manipulators 1 This research was sup , 1999 .

[64]  Saeed Behzadipour,et al.  Antagonistic variable stiffness elements , 2009 .

[65]  Saeed Behzadipour,et al.  Stiffness of Cable-based Parallel Manipulators With Application to Stability Analysis , 2006 .

[66]  Damien Chablat,et al.  Stiffness Analysis of Overconstrained Parallel Manipulators , 2009, ArXiv.

[67]  Feng Gao,et al.  Optimum design of 3-DOF spherical parallel manipulators with respect to the conditioning and stiffness indices , 2000 .

[68]  Adi Ben-Israel,et al.  Generalized inverses: theory and applications , 1974 .

[69]  Clément Gosselin,et al.  Kinematostatic modeling of compliant parallel mechanisms , 2011 .

[70]  M. Žefran,et al.  A Geometrical Approach to the Study of the Cartesian Stiffness Matrix , 2002 .

[71]  Paolo Gallina,et al.  Planar Translational Cable-Direct-Driven Robots , 2003, J. Field Robotics.

[72]  Kun Yu,et al.  Simultaneous Trajectory Tracking and Stiffness Control of Cable Actuated Parallel Manipulator , 2009 .

[73]  Yixin Chen,et al.  Optimal, fault-tolerant mappings to achieve secondary goals without compromising primary performance , 2003, IEEE Trans. Robotics Autom..

[74]  Marco Ceccarelli,et al.  Collision free path-planning for cable-driven parallel robots , 2009, Robotics Auton. Syst..

[75]  Vijay R. Kumar,et al.  On the 6 × 6 cartesian stiffness matrix for three-dimensional motions , 1998 .

[76]  Clément Gosselin,et al.  Analysis of the wrench-closure workspace of planar parallel cable-driven mechanisms , 2006, IEEE Transactions on Robotics.

[77]  So-Ryeok Oh,et al.  Cable suspended planar robots with redundant cables: controllers with positive tensions , 2005, IEEE Transactions on Robotics.

[78]  Jan A. Snyman,et al.  Optimization of a planar tendon-driven parallel manipulator for a maximal dextrous workspace , 2005 .

[79]  Saeid Nahavandi,et al.  Joint velocity redistribution for fault tolerant manipulators , 2010, 2010 IEEE Conference on Robotics, Automation and Mechatronics.

[80]  Tatsuo Arai,et al.  Hybrid drive parallel arm and its motion control , 2000, Proceedings. 2000 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2000) (Cat. No.00CH37113).

[81]  Saeed Behzadipour,et al.  A Variable Spring Using a Tensegrity Prism , 2009 .

[82]  Saeed Ebrahimi,et al.  Parameter Analysis and Normalization for the Dynamics and Design of Multibody Systems , 2009 .

[83]  Jean-Pierre Merlet,et al.  Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms , 2006, ARK.

[84]  Paolo Gallina,et al.  Translational Planar Cable-Direct-Driven Robots , 2003, J. Intell. Robotic Syst..

[85]  John J. Craig Zhu,et al.  Introduction to robotics mechanics and control , 1991 .