Design and development of a hand exoskeleton for rehabilitation of hand injuries

Abstract Hand injuries are common problems. In order to adapt to fingers of different sizes and avoid secondary injuries, a hand exoskeleton for rehabilitation is proposed. The exoskeleton is designed as a wearable device and each finger has three joints named the metacarpophalangeal (MCP) joint, the proximal interphalangeal (PIP) joint and the distal interphalangeal (DIP) joint which all employ a novel mechanism called “circuitous joint”. Adopting a symmetrical pinion and rack with a parallel sliding mechanism, the circuitous joint can cover a wide workspace of the finger and adapt to fingers of different thicknesses. And the parallel sliding mechanism ensures that the contact force between the exoskeleton and the finger is perpendicular to the finger's bone, which can minimize the secondary injuries. Moreover, the Bowden cable driving method reduces the burden on the fingers by placing the driving and control system on the forearm. Lastly, hand fitness test and contact force experiment are conducted and the results verify the rationality and effectiveness of the exoskeleton.

[1]  Naoki Kawakami,et al.  An Encounter-Type Multi-Fingered Master Hand Using Circuitous Joints , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[2]  Grigore C. Burdea,et al.  The Rutgers Master II-new design force-feedback glove , 2002 .

[3]  Takashi Maeno,et al.  Design and development of a 4 DOF portable haptic interface with multi-point passive force feedback for the index finger , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[4]  Michael Recce,et al.  A virtual reality based exercise system for hand rehabilitation post-stroke: transfer to function , 2004, EMBC 2004.

[5]  Shuang Wang,et al.  Multiple rehabilitation motion control for hand with an exoskeleton , 2011, 2011 IEEE International Conference on Robotics and Automation.

[6]  Derek G. Kamper,et al.  An Actuated Finger Exoskeleton for Hand Rehabilitation Following Stroke , 2007 .

[7]  K. Kondak,et al.  Mechanical design and motion control of a hand exoskeleton for rehabilitation , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[8]  Andreas Wege,et al.  Development and control of a hand exoskeleton for rehabilitation of hand injuries , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[9]  Shuguo Wang,et al.  Design and development of a portable exoskeleton based CPM machine for rehabilitation of hand injuries , 2007, 2007 IEEE International Conference on Robotics and Biomimetics (ROBIO).

[10]  Hong Liu,et al.  An exoskeleton master hand for controlling DLR/HIT hand , 2009, 2009 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[11]  Hong Liu,et al.  An exoskeleton force feedback master finger distinguishing contact and non-contact mode , 2009, 2009 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[12]  Hiroshi Yokoi,et al.  Development of hand rehabilitation system for paralysis patient – universal design using wire-driven mechanism – , 2009, 2009 Annual International Conference of the IEEE Engineering in Medicine and Biology Society.

[13]  N J Giori,et al.  Continuous passive motion (CPM): theory and principles of clinical application. , 2000, Journal of rehabilitation research and development.

[14]  Shuang Wang,et al.  Development of a hand exoskeleton system for index finger rehabilitation , 2012 .

[15]  K. Stubblefield,et al.  Hand Rehabilitation Following Stroke: A Pilot Study of Assisted Finger Extension Training in a Virtual Environment , 2007, Topics in stroke rehabilitation.

[16]  Yili Fu,et al.  Design and development of a hand rehabilitation robot for patient-cooperative therapy following stroke , 2011, 2011 IEEE International Conference on Mechatronics and Automation.