Modelling and simulation of hybrid electric ships with DC distribution systems

DC power system in ship applications is an emerging technology, which provides new opportunities for reducing fuel consumption and emission. However, the resulted power electronic-based system onboard the ship requires effective analysis tools to facilitate a full-realization of the advantages. This paper reviews the modelling of hybrid electric ship components including mechanical and electrical elements. Power electronic converters are modeled by nonlinear averaging methods to suit system-level studies. A unified model for bidirectional converters is proposed to avoid transitions between two separate models. A simulation platform using the derived models is developed for system-level analysis of hybrid electric ships. Simulation results of a hybrid electric ship with two diesel generators, a fuel cell, and an energy storage module are presented for different modes of operation.

[1]  J A Martinez,et al.  Definitions and Applications of Dynamic Average Models for Analysis of Power Systems , 2010, IEEE Transactions on Power Delivery.

[2]  G.M. Burt,et al.  Propulsion Drive Models for Full Electric Marine Propulsion Systems , 2007, 2007 IEEE International Electric Machines & Drives Conference.

[3]  Chun-Taek Rim,et al.  A complete DC and AC analysis of three-phase controlled-current PWM rectifier using circuit D-Q transformation , 1994 .

[4]  Malik Elbuluk,et al.  Fundamentals of Power Electronics , 2013 .

[5]  Jing Sun,et al.  Analysis and modeling of a DC hybrid power system testbed for power management strategy development , 2009, 2009 IEEE Vehicle Power and Propulsion Conference.

[6]  Huei Peng,et al.  A reference governor-based hierarchical control for failure mode power management of hybrid power systems for all-electric ships , 2011 .

[7]  Mogens Blanke,et al.  A Ship Propulsion System as a Benchmark for Fault-tolerant Control , 1997 .

[8]  Jan Fredrik Hansen,et al.  Increased Operational Performance of OSVs by Onboard DC Grid , 2011 .

[9]  Paul C. Krause,et al.  A Direct-and Quadrature-Axis Representation of a Parallel AC and DC Power System , 1966 .

[10]  O. C. Nebb,et al.  An isolated bidirectional converter modeling for hybrid electric ship simulations , 2012, 2012 IEEE Transportation Electrification Conference and Expo (ITEC).

[11]  Ingve Sorfonn,et al.  Hybrid Power Generation Systems , 2009, 2009 13th European Conference on Power Electronics and Applications.

[12]  B. Zahedi,et al.  Modeling, analysis and control of an isolated boost converter for system level studies , 2011, International Aegean Conference on Electrical Machines and Power Electronics and Electromotion, Joint Conference.

[13]  S.D. Sudhoff,et al.  A Medium Voltage DC Testbed for ship power system research , 2009, 2009 IEEE Electric Ship Technologies Symposium.

[14]  A. Davoudi,et al.  Dynamic average modeling of front-end diode rectifier loads considering discontinuous conduction mode and unbalanced operation , 2012, 2012 IEEE Power and Energy Society General Meeting.