Application of Cpfd Method to Analyze the Effects of Bed Material Density on Gas–Particle Hydrodynamics and Wall Erosion in a Cfb Boiler

[1]  C. Jeon,et al.  Effect of bed particle size on the gas-particle hydrodynamics and wall erosion characteristics in a 550 MWe USC CFB boiler using CPFD simulation , 2022, Energy.

[2]  S. Heinrich,et al.  MP-PIC simulation of circulating fluidized beds using an EMMS based drag model for Geldart B particles , 2021, Particuology.

[3]  Hairui Yang,et al.  1-Dimensional modelling of in-situ desulphurization performance of a 550 MWe ultra-supercritical CFB boiler , 2021 .

[4]  M. K. Karmakar,et al.  A numerical study on the wall erosion impact and gas-particle hydrodynamics in circulating fluidized bed riser , 2021 .

[5]  Haigang Wang,et al.  MP-PIC simulation of the gas-solid full-loop flow characteristics in a dual fluidized bed and validation with experimental data , 2021 .

[6]  Jin Yan,et al.  Validation and application of CPFD model in simulating gas-solid flow and combustion of a supercritical CFB boiler with improved inlet boundary conditions , 2020 .

[7]  Wenbin Li,et al.  Numerical study on influence of exit geometry in gas–solid flow hydrodynamics of HDCFB riser by CPFD , 2020 .

[8]  Hairui Yang,et al.  A comprehensive mass balance model of a 550 MWe ultra-supercritical CFB boiler with internal circulation , 2020 .

[9]  Karol Sztekler,et al.  A Comprehensive Three-Dimensional Analysis of a Large-Scale Multi-Fuel CFB Boiler Burning Coal and Syngas. Part 1. The CFD Model of a Large-Scale Multi-Fuel CFB Combustion , 2020, Entropy.

[10]  H. K. Nielsen,et al.  Loop seals in circulating fluidized beds – Review and parametric studies using CPFD simulation , 2020 .

[11]  Wuqiang Yang,et al.  Investigation of gas-solids flow characteristics in a pressurised circulating fluidised bed by experiment and simulation , 2020 .

[12]  Hairui Yang,et al.  Operation characteristics of a bubbling fluidized bed heat exchanger with internal solid circulation for a 550-MWe ultra-supercritical CFB boiler , 2020 .

[13]  Wenqi Zhong,et al.  Simulation on coal-fired supercritical CO2 circulating fluidized bed boiler: Coupled combustion with heat transfer , 2019 .

[14]  Hairui Yang,et al.  Ash formation characteristics of two Indonesian coals and the change of ash properties with particle size , 2019, Fuel Processing Technology.

[15]  A. Yu,et al.  MP-PIC modeling of CFB risers with homogeneous and heterogeneous drag models , 2018, Advanced Powder Technology.

[16]  Jianren Fan,et al.  Particle-Scale Investigation of Heat Transfer and Erosion Characteristics in a Three-Dimensional Circulating Fluidized Bed , 2018 .

[17]  Hongpeng Liu,et al.  Three-dimensional numerical simulation of the co-combustion of oil shale retorting solid waste with cornstalk particles in a circulating fluidized bed reactor , 2018 .

[18]  H. Hofbauer,et al.  Influence of drag laws on pressure and bed material recirculation rate in a cold flow model of an 8 MW dual fluidized bed system by means of CPFD , 2018 .

[19]  Wenqi Zhong,et al.  Simulation of Combustion of Municipal Solid Waste and Coal in an Industrial-Scale Circulating Fluidized Bed Boiler , 2017 .

[20]  Massoud Massoudi Farid,et al.  Numerical investigation of particle transport hydrodynamics and coal combustion in an industrial-scale circulating fluidized bed combustor: Effects of coal feeder positions and coal feeding rates , 2017 .

[21]  M. Rafique,et al.  Numerical investigation of solid circulation flux in an internally circulating fluidized bed with different gas distributor designs , 2016 .

[22]  Jianren Fan,et al.  A comprehensive numerical investigation on the hydrodynamics and erosion characteristics in a pressurized fluidized bed with dense immersed tube bundles , 2016 .

[23]  Ajay R. Bidwe,et al.  Experimental study of the effect of friction phenomena on actual and calculated inventory in a small-scale CFB riser , 2015 .

[24]  Yongmin Zhang,et al.  CPFD simulation on wear mechanisms in disk–donut FCC strippers , 2015 .

[25]  Kari Myöhänen,et al.  CFD modeling of gas–solids flow in a large scale circulating fluidized bed furnace , 2015 .

[26]  L. Shadle,et al.  Comparison of full-loop and riser-only simulations for a pilot-scale circulating fluidized bed riser , 2014 .

[27]  Wojciech Adamczyk,et al.  Modeling of particle transport and combustion phenomena in a large-scale circulating fluidized bed boiler using a hybrid Euler–Lagrange approach , 2014 .

[28]  Guizhi Qiu,et al.  Modelling and experimental investigation of the full-loop gas-solid flow in a circulating fluidized bed with six cyclone separators , 2014 .

[29]  Man Zhang,et al.  Application of CPFD method in the simulation of a circulating fluidized bed with a loop seal, part I—Determination of modeling parameters , 2014 .

[30]  Dale M. Snider,et al.  CO2 Adsorption loop experiment with Eulerian–Lagrangian simulation , 2013 .

[31]  J. Grace,et al.  Experimental and CPFD study of axial and radial liquid mixing in water-fluidized beds of two solids exhibiting layer inversion , 2013 .

[32]  Il Moon,et al.  Numerical analysis for particle deposit formation in reactor cyclone of residue fluidized catalytic cracking , 2013 .

[33]  Stefan Heinrich,et al.  CPFD simulation of circulating fluidized bed risers , 2013 .

[34]  Pinakeswar Mahanta,et al.  Parametric study on the hydrodynamics and heat transfer along the riser of a pressurized circulating fluidized bed unit , 2013 .

[35]  Wei Wang,et al.  MP-PIC simulation of CFB riser with EMMS-based drag model , 2012 .

[36]  Alireza Abbasi,et al.  CPFD simulation of a fast fluidized bed steam coal gasifier feeding section , 2011 .

[37]  V. Chawla,et al.  Hot Corrosion & Erosion Problems in Coal Based Power Plants in India and Possible Solutions – A Review , 2011 .

[38]  P. J. O'rourke,et al.  Eulerian–Lagrangian method for three-dimensional thermal reacting flow with application to coal gasifiers , 2011 .

[39]  D. Snider,et al.  Heterogeneous gas chemistry in the CPFD Eulerian–Lagrangian numerical scheme (ozone decomposition) , 2010 .

[40]  Wojciech Nowak,et al.  Modeling of solid fuels combustion in oxygen-enriched atmosphere in circulating fluidized bed boiler: Part 1. The mathematical model of fuel combustion in oxygen-enriched CFB environment , 2010 .

[41]  Yurong He,et al.  Prediction on immersed tubes erosion using two-fluid model in a bubbling fluidized bed , 2009 .

[42]  Junwu Wang,et al.  A Review of Eulerian Simulation of Geldart A Particles in Gas-Fluidized Beds , 2009 .

[43]  Dale M. Snider,et al.  Three fundamental granular flow experiments and CPFD predictions , 2007 .

[44]  Joachim Werther,et al.  Time-dependent behavior of the ash particle size distribution in a circulating fluidized bed system , 2005 .

[45]  Zdzislaw Mazur,et al.  Numerical 3D simulation of the erosion due to solid particle impact in the main stop valve of a steam turbine , 2004 .

[46]  Wei Ge,et al.  Simulation of Heterogeneous Structure in a Circulating Fluidized-Bed Riser by Combining the Two-Fluid Model with the EMMS Approach , 2004 .

[47]  John R. Grace,et al.  Two-dimensional model of heat transfer in circulating fluidized beds. Part II: Heat transfer in a high density CFB and sensitivity analysis , 2003 .

[48]  I. Olefjord,et al.  Erosion–corrosion of Fe- and Ni-based alloys at 550°C , 2003 .

[49]  D. Snider.  An incompressible three-dimensional multiphase particle-in-cell model for dense particle flows , 2001 .

[50]  Hsiaotao Bi,et al.  Annular wall layer thickness in circulating fluidized bed risers , 1996 .

[51]  P. J. O'rourke,et al.  The multiphase particle-in-cell (MP-PIC) method for dense particulate flows , 1996 .

[52]  J. Stringer.  Practical experience with wastage at elevated temperatures in coal combustion systems , 1995 .

[53]  John R. Grace,et al.  Tube wear in gas fluidized beds—II. Low velocity impact erosion and semi-empirical model for bubbling and slugging fluidized beds , 1991 .

[54]  A. Levy,et al.  EROSION MECHANISM IN DUCTILE METALS , 1981 .

[55]  G. Tilly.  Erosion caused by airborne particles , 1969 .