Impact of Sensor Data Characterization with Directional Nature of Fault and Statistical Feature Combination for Defect Detection on Roll-to-Roll Printed Electronics

Gravure printing, which is a roll-to-roll printed electronics system suitable for high-speed patterning of functional layers have advantages of being applied to flexible webs in large areas. As each of the printing procedure from inking to doctoring followed by ink transferring and setting influences the quality of the pattern geometry, it is necessary to detect and diagnose factors causing the printing defects beforehand. Data acquisition with three triaxial acceleration sensors for fault diagnosis of four major defects such as doctor blade tilting fault was obtained. To improve the diagnosis performances, optimal sensor selection with Sensor Data Efficiency Evaluation, sensitivity evaluation for axis selection with Directional Nature of Fault and feature variable optimization with Feature Combination Matrix method was applied on the raw data to form a Smart Data. Each phase carried out on the raw data progressively enhanced the diagnosis results in contents of accuracy, positive predictive value, diagnosis processing time, and data capacity. In the case of doctor blade tilting fault, the diagnosis accuracy increased from 48% to 97% with decreasing processing time of 3640 s to 16 s and the data capacity of 100 Mb to 5 Mb depending on the input data between raw data and Smart Data.

[1]  Changwoo Lee,et al.  Fault diagnosis based on the quantification of the fault features in a rotary machine , 2020 .

[2]  Reza Malekian,et al.  Development and trend of condition monitoring and fault diagnosis of multi-sensors information fusion for rolling bearings: a review , 2018 .

[3]  Kee-Hyun Shin,et al.  Approach to optimizing printed conductive lines in high-resolution roll-to-roll gravure printing , 2017 .

[4]  Changwoo Lee,et al.  Theories and Control Technologies for Web Handling in the Roll-to-Roll Manufacturing Process , 2020 .

[5]  Kee-Hyun Shin,et al.  Effect of nip force on ink transfer in high resolution roll-to-roll printing , 2015 .

[6]  Gyan Raj Koirala,et al.  The First Step towards a R2R Printing Foundry via a Complementary Design Rule in Physical Dimension for Fabricating Flexible 4‐Bit Code Generator , 2020, Advanced Electronic Materials.

[7]  Amrinder Singh Minhas,et al.  A new bearing fault diagnosis approach combining sensitive statistical features with improved multiscale permutation entropy method , 2021, Knowl. Based Syst..

[8]  Ill-Soo Kim,et al.  A Study on Cutting Quality Using a Mahalanobis Distance , 2021 .

[9]  Sanjay Kumar Singh,et al.  Application of Spectral Kurtosis and Improved Extreme Learning Machine for Bearing Fault Classification , 2019, IEEE Transactions on Instrumentation and Measurement.

[10]  Changwoo Lee,et al.  Optimal Design of Pneumatic Flotation for Roll-to-Roll Conveyance in the Production of Printed Circuits , 2020 .

[11]  Qunxiong Zhu,et al.  Novel Mahalanobis Distance Based Fault Diagnosis Using Discrimination Neighborhood Preserving Embedding for Industrial Process , 2021, 2021 IEEE 10th Data Driven Control and Learning Systems Conference (DDCLS).

[12]  Changwoo Lee,et al.  Advanced Tension Model for Highly Integrated Flexible Electronics in Roll-to-Roll Manufacturing , 2022, IEEE/ASME Transactions on Mechatronics.

[13]  Gyoujin Cho,et al.  Resistance Control of an Additively Manufactured Conductive Layer in Roll-to-Roll Gravure Printing Systems , 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

[14]  Changwoo Lee,et al.  Fabrication of Thickness-Controllable Double Layer Electrolyte Using Roll-to-Roll Additive Manufacturing System , 2020, International Journal of Precision Engineering and Manufacturing-Green Technology.

[15]  Hongquan Ji,et al.  Statistics Mahalanobis distance for incipient sensor fault detection and diagnosis , 2021 .

[16]  S. H. Lee,et al.  Fabrication of Comb-Structured Acceleration Sensors by Roll-to-Roll Gravure Printing , 2021, International Journal of Precision Engineering and Manufacturing-Green Technology.

[17]  Min Xia,et al.  Fault Diagnosis for Rotating Machinery Using Multiple Sensors and Convolutional Neural Networks , 2018, IEEE/ASME Transactions on Mechatronics.

[18]  Orhan Yaman,et al.  A sound based method for fault detection with statistical feature extraction in UAV motors , 2021 .

[19]  W. Gui,et al.  Fault Diagnosis of Hydraulic Systems Based on Deep Learning Model With Multirate Data Samples , 2021, IEEE Transactions on Neural Networks and Learning Systems.

[20]  Wenhua Du,et al.  Data-driven fault diagnosis method based on the conversion of erosion operation signals into images and convolutional neural network , 2021, Process Safety and Environmental Protection.

[21]  Xuezhen Cheng,et al.  Sensor Fault Diagnosis Based on Adaptive Arc Fuzzy DBN-Petri Net , 2021, IEEE Access.

[22]  Diyar Qader Zeebaree,et al.  A Comprehensive Review of Dimensionality Reduction Techniques for Feature Selection and Feature Extraction , 2020, Journal of Applied Science and Technology Trends.

[23]  Larry A. Rendell,et al.  A Practical Approach to Feature Selection , 1992, ML.

[24]  Dong-Soo Kim,et al.  The effect of shear force on ink transfer in gravure offset printing , 2010 .

[25]  T. Kraft,et al.  One-step polymer assisted roll-to-roll gravure-printed perovskite solar cells without using anti-solvent bathing , 2021, Cell Reports Physical Science.

[26]  Olivier Markowitch,et al.  Reducing Data Complexity in Feature Extraction and Feature Selection for Big Data Security Analytics , 2018, 2018 1st International Conference on Data Intelligence and Security (ICDIS).

[27]  Kee-Hyun Shin,et al.  A mathematical model to predict surface roughness and pattern thickness in roll-to-roll gravure printed electronics , 2013 .

[28]  Subhashis Chatterjee,et al.  A Mahalanobis distance based algorithm for assigning rank to the predicted fault prone software modules , 2018, Appl. Soft Comput..

[29]  Wilkie W. Chaffin,et al.  The effect of skewness and kurtosis on the one-sample T test and the impact of knowledge of the population standard deviation , 1993 .

[30]  Alessandro Goedtel,et al.  Multi-Fault Diagnosis in Three-Phase Induction Motors Using Data Optimization and Machine Learning Techniques , 2021, Electronics.