Online Measurement of Deposit Surface in Electron Beam Freeform Fabrication

In the process of electron beam freeform fabrication (EBF3), due to the continuous change of thermal conditions and variability in wire feeding in the deposition process, geometric deviations are generated in the deposition of each layer. In order to prevent the layer-by-layer accumulation of the deviation, it is necessary to perform online geometry measurement for each deposition layer, based on which the error compensation can be done for the previous deposition layer in the next deposition layer. However, the traditional three-dimensional reconstruction method that employs structured laser cannot meet the requirements of long-term stable operation in the manufacturing process of EBF3. Therefore, this paper proposes a method to measure the deposit surfaces based on the position information of electron beam speckle, in which an electron beam is used to bombard the surface of the deposit to generate the speckle. Based on the structured information of the electron beam in the vacuum chamber, the three-dimensional reconstruction of the surface of the deposited parts is realized without need of additional structured laser sensor. In order to improve the detection accuracy, the detection error is theoretically analyzed and compensated. The absolute error after compensation is smaller than 0.1 mm, and the precision can reach 0.1%, which satisfies the requirements of 3D reconstruction of the deposited parts. An online measurement system is built for the surface of deposited parts in the process of electron beam freeform fabrication, which realizes the online 3D reconstruction of the surface of the deposited layer. In addition, in order to improve the detection stability of the whole system, the image processing algorithm suitable for this scene is designed. The reliability and speed of the algorithm are improved by ROI extraction, threshold segmentation, and expansion corrosion. In addition, the speckle size information can also reflect the thermal conditions of the surface of the deposited parts. Hence, it can be used for online detection of defects such as infusion and voids.

[1]  Li Wang,et al.  A Vision-Aided 3D Path Teaching Method before Narrow Butt Joint Welding , 2017, Sensors.

[2]  Zhixu Dong,et al.  A Fast and On-Machine Measuring System Using the Laser Displacement Sensor for the Contour Parameters of the Drill Pipe Thread , 2018, Sensors.

[3]  Dong Du,et al.  A Precise Visual Method for Narrow Butt Detection in Specular Reflection Workpiece Welding , 2016, Sensors.

[4]  Joe-Air Jiang,et al.  A Novel Pulse Measurement System by Using Laser Triangulation and a CMOS Image Sensor , 2007, Sensors.

[5]  Matthew S. Hoehler,et al.  Application of blue laser triangulation sensors for displacement measurement through fire , 2016, Measurement science & technology.

[6]  Jair Carlos Dutra,et al.  Welding Joint Features Extraction Algorithm for Laser Triangulation Sensors Applied to Root Pass Control , 2017 .

[7]  E. Herderick,et al.  Additive Manufacturing of Metals: A Review , 2011 .

[8]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[9]  Eric R. Burke,et al.  In-process thermal imaging of the electron beam freeform fabrication process , 2016, SPIE Commercial + Scientific Sensing and Imaging.

[10]  Guangjun Zhang,et al.  A vision measurement model of laser displacement sensor and its calibration method , 2013 .

[11]  Radovan Kovacevic,et al.  A Laser-Based Vision System for Weld Quality Inspection , 2011, Sensors.

[12]  Qiang Gao,et al.  A Scheme for Enhancing Precision in 3-Dimensional Positioning for Non-Contact Measurement Systems Based on Laser Triangulation , 2018, Sensors.

[13]  Karen M. Taminger,et al.  Electron Beam Freeform Fabrication in the Space Environment , 2007 .

[14]  Weijun Liu,et al.  Measurement of Free-Form Curved Surfaces Using Laser Triangulation , 2018, Sensors.

[15]  Olivier Aubreton,et al.  Infrared system for 3D scanning of metallic surfaces , 2013, Machine Vision and Applications.

[16]  Li Wang,et al.  A Weld Position Recognition Method Based on Directional and Structured Light Information Fusion in Multi-Layer/Multi-Pass Welding , 2018, Sensors.

[17]  Bin Sun,et al.  A Rapid Method to Achieve Aero-Engine Blade Form Detection , 2015, Sensors.

[18]  Karen M. Taminger,et al.  Electron Beam Freeform Fabrication: A Rapid Metal Deposition Process , 2003 .