A technical challenge for large power loading test device is how to achieve both of high loading dynamic performance and high energy efficiency, consequently power recovery and reuse technology should be applied. Hydrostatic secondary control has reasonable dynamic performance for loading and benefits power recovery. However conventional secondary control based on constant pressure network (CPSCS) can still be further improved when using in loading test bench for hydraulic driving head. This paper proposes hydrostatic variable-pressure secondary-control (VPSCS), for which the corresponding system is designed. Subsequently by simulation with AMESim, the dynamic performance and energy feedback or recovery efficiency of CPSCS and VPSCS are analyzed and evaluated, and finally the works in the next step are presented. The conclusion shows VPSCS, compared with CPSCS, improves energy feedback efficiency by 18%~30% but has worse wave shape of load torque when using the servo pressure valve set designed preliminarily.
[1]
Xingjian Wang,et al.
Electrical load simulator based on velocity-loop compensation and improved fuzzy-PID
,
2009,
2009 IEEE International Symposium on Industrial Electronics.
[2]
Weihua Li.
ROTOR FAULT DIAGNOSIS METHOD BASED ON KERNEL FUNCTION APPROXIMATION
,
2006
.
[3]
Hui Wang,et al.
Coupling influence and decoupling control of the secondary regulation loading system for the drive axle of vehicle
,
2010,
2010 International Conference on Mechanic Automation and Control Engineering.
[4]
Zhixin Chen,et al.
Bond graph model of a new hydraulic winch test bench on energy recycle
,
2010,
2010 IEEE International Conference on Industrial Engineering and Engineering Management.