A Novel Approach for Reliability Investigation of LEDs on Molded Interconnect Devices Based on FE-Analysis Coupled to Injection Molding Simulation

Due to many advantages, such as cost-effective production, design freedom, and weight reduction, plastics have replaced metals and ceramics in many fields. However, engineering plastics are good thermal insulators. This characteristic, although beneficial in certain applications, poses many challenges in many heat-generating applications. This can lead to hot spots or even to an increase in the device temperature. Along with the increasing demand for plastics in areas of the lighting technology or in the automotive field due to the free shaping potential, the requirements are becoming more challenging. Driven by the trend of miniaturization, applications with high heat generation often have to operate in the tightest of spaces. Since not always sufficient space for complex cooling systems is given, the housing or the substrate should assume the task of thermal management. In regard to this fact, the use of thermally conductive thermoplastics seems to be very appealing. Quality loss, poorer reliability, loss of performance, and even failure can occur in case of insufficient heat dissipation. In order to improve the properties of these polymers, highly heat-conducting fillers are added in order to improve the thermal conductivity of the compound. Another technology trend that has been prevalent for years is the use of simulations. Due to shorter product life cycles and therefore shorter development times, simulation has become an indispensable part of the chain of product development. Time-consuming and costly test series make the simulation more and more important as a tool for material and product design. In this context, this paper presents a novel approach for reliability investigation and lifetime estimation, based on simulation. Therefore, a simulative method based on coupling the results from the process simulation (injection molding simulation) to finite element analysis was developed and explained. This coupled method makes it possible to take into account the manufacturing process and its engendered filler orientation. The obtained findings are compared to conventional thermal steady-state analysis and used in order to better predict the lifetime of LEDs mounted on thermoplastic substrates, the so-called molded interconnect devices. It is demonstrated that it is necessary to consider the filler orientation, especially in the case of 3D substrates.

[1]  P. V. Varde,et al.  Light emitting diodes reliability review , 2012, Microelectron. Reliab..

[2]  S. Nemat-Nasser,et al.  Micromechanics: Overall Properties of Heterogeneous Materials , 1993 .

[3]  Maria Gabriella Masi,et al.  A test set for LEDs life model estimation , 2010, 2010 IEEE Instrumentation & Measurement Technology Conference Proceedings.

[4]  Miao Cai,et al.  Thermal resistance analysis of high power LED module under power cycling test , 2014, 2014 15th International Conference on Electronic Packaging Technology.

[5]  A. Fernandez,et al.  Accelerated Life Test of high luminosity blue LEDs , 2016, Microelectron. Reliab..

[6]  Shaohua Yang,et al.  Analysis on failure modes and mechanisms of LED , 2009, 2009 8th International Conference on Reliability, Maintainability and Safety.

[7]  Romit Kulkarni,et al.  Reliability Study and Thermal Performance of LEDs on Molded Interconnect Devices (MID) and PCB , 2018, IEEE Access.

[8]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[10]  En Yunfei,et al.  The relationship between LED package and reliability , 2009, 2009 16th IEEE International Symposium on the Physical and Failure Analysis of Integrated Circuits.

[11]  Romit Kulkarni,et al.  Development and Validation of a Novel Setup for LEDs Lifetime Estimation on Molded Interconnect Devices , 2018, Instruments.

[12]  B. Jacobs,et al.  Lumen maintenance predictions for LED packages using LM80 data , 2015, 2015 16th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[13]  G. Farkas,et al.  Thermal Testing of LEDs , 2014 .

[14]  Maria Gabriella Masi,et al.  Experimental analysis of LEDs'reliability under combined stress conditions , 2011, 2011 IEEE International Instrumentation and Measurement Technology Conference.

[15]  Guo Qi Zhang,et al.  Solid State Lighting Reliability Part 2 Components to Systems , 2017 .

[16]  Dominik Lorenz,et al.  Effect of voids on thermo-mechanical reliability of chip resistor solder joints: Experiment, modelling and simulation , 2018, Microelectron. Reliab..

[17]  W. B. Chen,et al.  Accelerated testing method of LED luminaries , 2012, 2012 13th International Thermal, Mechanical and Multi-Physics Simulation and Experiments in Microelectronics and Microsystems.

[18]  P. Wild,et al.  Void Formation and Their Effect on Reliability of Lead-Free Solder Joints on MID and PCB Substrates , 2017, IEEE Transactions on Reliability.

[19]  Romit Kulkarni,et al.  Experimental and computational study of array effects on LED thermal management on molded interconnect devices MID , 2018, 2018 13th International Congress Molded Interconnect Devices (MID).

[20]  M. Pecht,et al.  Lifetime Estimation of High-Power White LED Using Degradation-Data-Driven Method , 2012, IEEE Transactions on Device and Materials Reliability.

[21]  Thomas Leneke.  Entwärmungskonzepte durch funktionale Strukturen in spritzgegossenen dreidimensionalen Schaltungsträgern , 2013 .

[22]  Hatta Hiroshi,et al.  Equivalent inclusion method for steady state heat conduction in composites , 1986 .

[23]  W. B. Chen,et al.  A reliability analysis method for LED luminaires based on step stress accelerated degradation test , 2013, 2013 14th International Conference on Electronic Packaging Technology.