A Sodium-Ion-Conducting Direct Formate Fuel Cell: Generating Electricity and Producing Base.

A barrier that limits the development of the conventional cation-exchange membrane direct liquid fuel cells (CEM-DLFCs) is that the CEM-DLFCs need additional base to offer both alkaline environment and charge carriers. Herein, we propose a Na+ -conducting direct formate fuel cell (Na-DFFC) that is operated in the absence of added base. A proof-of-concept Na-DFFC yields a peak power density of 33 mW cm-2 at 60 °C, mainly because the hydrolysis of sodium formate provides enough OH- and Na+ ions, proving the conceptual feasibility. Moreover, contrary to the conventional chlor-alkali process, this Na-DFFC enables to generate electricity and produce NaOH simultaneously without polluting the environment. The Na-DFFC runs stably during 13 hours of continuous operation at a constant current of 10 mA, along with a theoretical production of 195 mg NaOH. This work presents a new type of electrochemical conversion device that possesses a wide range of potential applications.

[1]  Claudio Bianchini,et al.  Palladium-based electrocatalysts for alcohol oxidation in half cells and in direct alcohol fuel cells. , 2009, Chemical reviews.

[2]  Immaculada Iglesias,et al.  Modeling of the anode of a liquid-feed DMFC: Inhomogeneous compression effects and two-phase transport phenomena , 2014 .

[3]  John L. Haan,et al.  Operation of the Alkaline Direct Formate Fuel Cell in the Absence of Added Hydroxide , 2013 .

[4]  Ya-Ling He,et al.  A high-performance direct formate-peroxide fuel cell with palladium–gold alloy coated foam electrodes , 2015 .

[5]  Yinshi Li,et al.  A liquid-electrolyte-free anion-exchange membrane direct formate-peroxide fuel cell , 2016 .

[6]  Salvador Mayoral,et al.  Formate: an Energy Storage and Transport Bridge between Carbon Dioxide and a Formate Fuel Cell in a Single Device. , 2015, ChemSusChem.

[7]  Ya-Ling He,et al.  Performance of direct formate-peroxide fuel cells , 2015 .

[8]  Gang Wu,et al.  High-activity PtRuPd/C catalyst for direct dimethyl ether fuel cells. , 2015, Angewandte Chemie.

[9]  R. Slade,et al.  Comparison of PVDF- and FEP-based radiation-grafted alkaline anion-exchange membranes for use in low temperature portable DMFCs , 2002 .

[10]  Andrzej Wieckowski,et al.  Prospective direct formate fuel cell , 2012 .

[11]  S. Jiang,et al.  HPW/MCM‐41 Phosphotungstic Acid/Mesoporous Silica Composites as Novel Proton‐Exchange Membranes for Elevated‐Temperature Fuel Cells , 2010, Advanced materials.

[12]  Omar Z. Sharaf,et al.  An overview of fuel cell technology: Fundamentals and applications , 2014 .

[13]  Chao Zhang,et al.  Networking Pyrolyzed Zeolitic Imidazolate Frameworks by Carbon Nanotubes Improves Conductivity and Enhances Oxygen‐Reduction Performance in Polymer‐Electrolyte‐Membrane Fuel Cells , 2017, Advanced materials.

[14]  J. Haan,et al.  The direct formate fuel cell with an alkaline anion exchange membrane , 2012 .

[15]  L. Gubler.  Polymer Design Strategies for Radiation‐Grafted Fuel Cell Membranes , 2014 .

[16]  Jinlong Yang,et al.  Partially oxidized atomic cobalt layers for carbon dioxide electroreduction to liquid fuel , 2016, Nature.

[17]  T. Zhao,et al.  A Passive Anion-exchange Membrane Direct Ethanol Fuel Cell Stack and its Applications , 2016 .

[18]  E. Antolini.  Palladium in fuel cell catalysis , 2009 .

[19]  M. Antonietti,et al.  Efficient metal-free oxygen reduction in alkaline medium on high-surface-area mesoporous nitrogen-doped carbons made from ionic liquids and nucleobases. , 2011, Journal of the American Chemical Society.

[20]  Q. Cai,et al.  Modelling the 3D microstructure and performance of solid oxide fuel cell electrodes: Computational parameters , 2011 .

[21]  Ya-Ling He,et al.  An All-in-One Electrode for High-Performance Liquid-Feed Micro Polymer Electrolyte Membrane Fuel Cells , 2016 .

[22]  Tom Regier,et al.  Co₃O₄ nanocrystals on graphene as a synergistic catalyst for oxygen reduction reaction. , 2011, Nature materials.

[23]  Huamin Zhang,et al.  Zn electrode with a layer of nanoparticles for selective electroreduction of CO2 to formate in aqueous solutions , 2016 .

[24]  F. Ke,et al.  Electrochemical Reduction of Carbon Dioxide I. Effects of the Electrolyte on the Selectivity and Activity with Sn Electrode , 2012 .

[25]  Angel Irabien,et al.  Continuous electrochemical reduction of carbon dioxide into formate using a tin cathode: Comparison with lead cathode , 2014 .

[26]  Thomas I. Valdez,et al.  Electrochemical Conversion of Carbon Dioxide to Formate in Alkaline Polymer Electrolyte Membrane Cells , 2011 .

[27]  Fritz B. Prinz,et al.  The Air'Platinum'Nafion Triple-Phase Boundary: Characteristics, Scaling, and Implications for Fuel Cells , 2004 .

[28]  F. Du,et al.  Nitrogen-Doped Carbon Nanotube Arrays with High Electrocatalytic Activity for Oxygen Reduction , 2009, Science.

[29]  Ya-Ling He,et al.  A Monolithic Carbon Foam-Supported Pd-Based Catalyst towards Ethanol Electro-Oxidation in Alkaline Media , 2016 .

[30]  Vincent Artero,et al.  Carbon-Nanotube-Supported Bio-Inspired Nickel Catalyst and Its Integration in Hybrid Hydrogen/Air Fuel Cells. , 2017, Angewandte Chemie.

[31]  S. Barnett,et al.  A reduced temperature solid oxide fuel cell with nanostructured anodes , 2011 .

[32]  Salvador Mayoral,et al.  An integrated device to convert carbon dioxide to energy , 2016 .