Casted polymeric blends of carboxymethyl cellulose/polyvinyl alcohol doped with gold nanoparticles via pulsed laser ablation technique; morphological features, optical and electrical investigation

[1]  A. Mostafa.  Preparation and study of nonlinear response of embedding ZnO nanoparticles in PVA thin film by pulsed laser ablation , 2021 .

[2]  S. Lanceros‐Méndez,et al.  Cellulose and its derivatives for lithium ion battery separators: A review on the processing methods and properties , 2020 .

[3]  A. Mostafa,et al.  Effect of dual-beam laser radiation for synthetic SnO2/Au nanoalloy for antibacterial activity , 2020 .

[4]  A. A. Menazea,et al.  Gold nanoparticles doped Polyvinyl Alcohol/Chitosan blend via laser ablation for electrical conductivity enhancement , 2020 .

[5]  Ș. Voicu,et al.  Recent advances in composites based on cellulose derivatives for biomedical applications. , 2020, Carbohydrate polymers.

[6]  M. K. Ahmed,et al.  Synthesis and antibacterial activity of graphene oxide decorated by silver and copper oxide nanoparticles , 2020 .

[7]  M. K. Ahmed,et al.  Wound healing activity of Chitosan/Polyvinyl Alcohol embedded by gold nanoparticles prepared by nanosecond laser ablation , 2020 .

[8]  A. A. Menazea,et al.  Physical characterization and antibacterial activity of PVA/Chitosan matrix doped by selenium nanoparticles prepared via one-pot laser ablation route , 2020, Journal of Materials Research and Technology.

[9]  M. K. Ahmed,et al.  Nanosecond laser ablation assisted the enhancement of antibacterial activity of copper oxide nano particles embedded though Polyethylene Oxide/Polyvinyl pyrrolidone blend matrix , 2020 .

[10]  A. A. Menazea,et al.  Polyvinyl Alcohol/Silver nanoparticles film prepared via pulsed laser ablation: An eco-friendly nano-catalyst for 4-nitrophenol degradation , 2020 .

[11]  Jianqi Zhang,et al.  An optical fiber sensor based on carboxymethyl cellulose/carbon nanotubes composite film for simultaneous measurement of relative humidity and temperature , 2020 .

[12]  M. Afifi,et al.  Au-doped carbonated hydroxyapatite sputtered on alumina scaffolds via pulsed laser deposition for biomedical applications , 2020 .

[13]  A. A. Menazea,et al.  Antibacterial activity of TiO2 doped ZnO composite synthesized via laser ablation route for antimicrobial application , 2020 .

[14]  Yuehua Wu,et al.  Smart multi-layer PVA foam/ CMC mesh dressing with integrated multi-functions for wound management and infection monitoring , 2020, Materials & Design.

[15]  Gang Sun,et al.  The application of ultraviolet-induced photo-crosslinking in edible film preparation and its implication in food safety , 2020 .

[16]  Lidong Wang,et al.  Engineering a ratiometric fluorescent sensor membrane containing carbon dots for efficient fluoride detection and removal , 2020 .

[17]  N. Tavengwa,et al.  Application of carboxymethyl polysaccharides as bio-sorbents for the sequestration of heavy metals in aquatic environments. , 2020, Carbohydrate polymers.

[18]  Q. Bui,et al.  Novel nanohybrid of blackberry-like gold structures deposited graphene as a free-standing sensor for effective hydrogen peroxide detection , 2020 .

[19]  Nelson Pynadathu Rumjit,et al.  Comprehensive review on nanocellulose: Recent developments, challenges and future prospects. , 2020, Journal of the mechanical behavior of biomedical materials.

[20]  A. S. Samsudin,et al.  Proton (H+) transport properties of CMC–PVA blended polymer solid electrolyte doped with NH4NO3 , 2020 .

[21]  A. A. Menazea,et al.  The role of Li4Ti5O12 nanoparticles on enhancement the performance of PVDF/PVK blend for lithium-ion batteries , 2020 .

[22]  A. Mostafa,et al.  Synthesis of ZnO and Au@ZnO core/shell nano-catalysts by pulsed laser ablation in different liquid media , 2020 .

[23]  Jie Pang,et al.  Effect of carboxylation cellulose nanocrystal and grape peel extracts on the physical, mechanical andantioxidant properties of konjac glucomannan films. , 2020, International journal of biological macromolecules.

[24]  A. Abdelghany,et al.  Blend biopolymeric nanofibrous scaffolds of cellulose acetate/ε-polycaprolactone containing metallic nanoparticles prepared by laser ablation for wound disinfection applications. , 2020, International journal of biological macromolecules.

[25]  M. K. Ahmed,et al.  Silver and copper oxide nanoparticles-decorated graphene oxide via pulsed laser ablation technique: Preparation, characterization, and photoactivated antibacterial activity , 2020 .

[26]  M. K. Ahmed,et al.  Manipulation of AgNPs coated on selenium/carbonated hydroxyapatite/ε-polycaprolactone nano-fibrous via pulsed laser deposition for wound healing applications , 2020 .

[27]  Xuhong Yang,et al.  Rutin-loaded cellulose acetate/poly(ethylene oxide) fiber membrane fabricated by electrospinning: A bioactive material. , 2020, Materials science & engineering. C, Materials for biological applications.

[28]  C. Cho,et al.  Development and evaluation of TPGS/PVA-based nanosuspension for enhancing dissolution and oral bioavailability of ticagrelor. , 2020, International journal of pharmaceutics.

[29]  A. Tok,et al.  Membrane type comparison and modification to modulate sample flow in paper diagnostics , 2020 .

[30]  A. Basta,et al.  Influence of coating by Cu and Ag nanoparticles via pulsed laser deposition technique on optical, electrical and mechanical properties of cellulose paper , 2020 .

[31]  A. A. Menazea,et al.  Effect of nanostructured metal oxides (CdO, Al2O3, Cu2O) embedded in PVA via Nd:YAG pulsed laser ablation on their optical and structural properties , 2020 .

[32]  A. A. Menazea.  One-Pot Pulsed Laser Ablation route assisted copper oxide nanoparticles doped in PEO/PVP blend for the electrical conductivity enhancement , 2020 .

[33]  S. Wageh,et al.  Microstructural, morphological behavior and removal of Cr(VI) and Se(IV) from aqueous solutions by magnetite nanoparticles/PVA and cellulose acetate nanofibers , 2020, Applied Physics A.

[34]  O. Sulaiman,et al.  Characterization of rubberwood particleboard made using carboxymethyl starch mixed with polyvinyl alcohol as adhesive , 2020 .

[35]  S. Nam,et al.  Surface-modified polyvinyl alcohol (PVA) membranes for pervaporation dehydration of epichlorohydrin (ECH), isopropanol (IPA), and water ternary feed mixtures , 2020, Journal of Industrial and Engineering Chemistry.

[36]  S. Prabhakar,et al.  Optimization of process using carboxymethyl chitosan for the removal of mixed heavy metals from aqueous streams. , 2020, International journal of biological macromolecules.

[37]  S. B. Aziz,et al.  A study of electron regeneration efficiency in fluorophore , 2020 .

[38]  A. Bajpai,et al.  Synthesis of hydrophobically modified guar gum film for packaging materials , 2020 .

[39]  A. S. Samsudin,et al.  Studies on ionics conduction properties of modification CMC-PVA based polymer blend electrolytes via impedance approach , 2020 .

[40]  H. Uyama,et al.  Hierarchical porous carbons from polysaccharides carboxymethyl cellulose, bacterial cellulose, and citric acid for supercapacitor. , 2020, Carbohydrate polymers.

[41]  A. Mostafa,et al.  One-pot synthesis of nanostructured CdS, CuS, and SnS by pulsed laser ablation in liquid environment and their antimicrobial activity , 2020 .

[42]  A. Mostafa,et al.  Synthesis of antimicrobial cellulosic derivative and its catalytic activity , 2020 .

[43]  F. Neri,et al.  Bio-hybrid gold nanoparticles as SERS probe for rapid bacteria cell identification. , 2020, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[44]  A. Basta,et al.  Optical, electrical and mechanical studies of paper sheets coated by metals (Cu and Ag) via pulsed laser deposition , 2019 .

[45]  A. A. Menazea,et al.  Synthesis, characterization and antimicrobial activity of Chitosan/Polyvinyl Alcohol blend doped with Hibiscus Sabdariffa L. extract , 2019 .

[46]  A. Mostafa,et al.  Cadmium oxide/TEMPO-oxidized cellulose nanocomposites produced by pulsed laser ablation in liquid environment: Synthesis, characterization, and antimicrobial activity , 2019 .

[47]  H. Hamishehkar,et al.  Graphene Quantum Dot Cross-linked Carboxymethyl Cellulose Nanocomposite Hydrogel for pH-Sensitive Oral Anticancer Drug Delivery with Potential Bioimaging Properties. , 2019, International journal of biological macromolecules.

[48]  A. Pinotti,et al.  NANOCOMPOSITE BILAYERS BASED ON PVA AND CHITOSAN FUNCTIONALIZED WITH GALLIC ACID. , 2019, International journal of biological macromolecules.

[49]  A. A. Menazea,et al.  Different time's Nd:YAG laser-irradiated PVA/Ag nanocomposites: structural, optical, and electrical characterization , 2019, Journal of Materials Research and Technology.

[50]  A. Mostafa,et al.  Synthesis of cadmium oxide nanoparticles by pulsed laser ablation in liquid environment , 2017 .

[51]  M. A. Ahmed,et al.  Microstructural features of flower like Fe brushite , 2017 .

[52]  S. El-dek,et al.  Physico-mechanical and morphological features of zirconia substituted hydroxyapatite nano crystals , 2017, Scientific Reports.

[53]  M. Talaat,et al.  Investigation of factors affecting the synthesis of nano-cadmium sulfide by pulsed laser ablation in liquid environment. , 2016, Spectrochimica acta. Part A, Molecular and biomolecular spectroscopy.

[54]  M. A. Ahmed,et al.  Effect of preparation conditions on the nanostructure of hydroxyapatite and brushite phases , 2016, Applied Nanoscience.

[55]  M. A. Ahmed,et al.  Characterization and annealing performance of calcium phosphate nanoparticles synthesized by co-precipitation method , 2014 .