A Novel Multiscale Physics-Based Progressive Damage and Failure Modeling Tool for Advanced Composite Structures

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xvi

[1]  Mark S. Shephard,et al.  Computational plasticity for composite structures based on mathematical homogenization: Theory and practice , 1997 .

[2]  J. Jones,et al.  Waves at a Flexibly Bonded Interface , 1967 .

[3]  F. Yuan,et al.  Transverse Cracking and Stiffness Reduction in Composite Laminates , 1993 .

[4]  Alberto Taliercio,et al.  Uniaxial strength of polymeric-matrix fibrous composites predicted through a homogenization approach , 1995 .

[5]  David H. Allen,et al.  A thermomechanical constitutive theory for elastic composites with distributed damage—I. Theoretical development , 1987 .

[6]  K. Garikipati.  A variational multiscale method to embed micromechanical surface laws in the macromechanical continuum formulation , 2002 .

[7]  Carl T. Herakovich,et al.  Mechanics of Fibrous Composites , 1997 .

[8]  Jacob Aboudi,et al.  Formulation of the high-fidelity generalized method of cells with arbitrary cell geometry for refined micromechanics and damage in composites , 2010 .

[9]  R. Hill.  The Elastic Behaviour of a Crystalline Aggregate , 1952 .

[10]  Steven M. Arnold,et al.  A Framework for Performing Multiscale Stochastic Progressive Failure Analysis of Composite Structures , 2006 .

[11]  Pedro P. Camanho,et al.  Failure Models and Criteria for Frp Under In-Plane or Three-Dimensional Stress States Including Shear Non-Linearity , 2013 .

[12]  Peter A. Gustafson,et al.  Analytical and Experimental Methods for Adhesively Bonded Joints Subjected to High Temperatures. , 2008 .

[13]  McCartney Ln.  Mechanics for the Growth of Bridged Cracks in Composite Materials: Part II. Applications , 1992 .

[14]  Guillaume Rateau,et al.  The Arlequin method as a flexible engineering design tool , 2005 .

[15]  Jan Drewes Achenbach,et al.  Effect of interfacial zone on mechanical behavior and failure of fiber-reinforced composites , 1989 .

[16]  Carlos González,et al.  Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling , 2007 .

[17]  Marek-Jerzy Pindera,et al.  An efficient implementation of the generalized method of cells for unidirectional, multi-phased composites with complex microstructures , 1999 .

[18]  B. Bednarcyk,et al.  Local field effects in titanium matrix composites subject to fiber-matrix debonding , 2004 .

[19]  J. Aboudi,et al.  Higher-order theory for periodic multiphase materials with inelastic phases , 2003 .

[20]  Michael F. Ashby,et al.  The damage mechanics of brittle solids in compression , 1990 .

[21]  Philip B. Bogert,et al.  The Effect of Delamination on Damage Path and Failure Load Prediction for Notched Composite Laminates , 2007 .

[22]  Thomas J. R. Hughes,et al.  A study of strain localization in a multiple scale framework—The one-dimensional problem , 1998 .

[23]  George J. Dvorak,et al.  Progressive Transverse Cracking In Composite Laminates , 1988 .

[24]  Frédéric Feyel,et al.  Multiscale FE2 elastoviscoplastic analysis of composite structures , 1999 .

[25]  D. Krajcinovic,et al.  Introduction to continuum damage mechanics , 1986 .

[26]  Richard Schapery,et al.  An Investigation of the Existence of a Work Potential for Fiber-Reinforced Plastic , 1993 .

[27]  Qingda Yang,et al.  Cohesive models for damage evolution in laminated composites , 2005 .

[28]  P. Gudmundson,et al.  First Order Analysis of Stiffness Reduction Due to Matrix Cracking , 1992 .

[29]  Jacob Fish,et al.  Multiscale Methods: Bridging the Scales in Science and Engineering , 2009 .

[30]  H. Qiao,et al.  Implementation of the Arlequin method into ABAQUS: Basic formulations and applications , 2011, Adv. Eng. Softw..

[31]  Jacob Fish,et al.  Multiscale damage modelling for composite materials: theory and computational framework , 2001 .

[32]  Michael R Wisnom,et al.  Modelling the interaction between matrix cracks and delamination damage in scaled quasi-isotropic specimens , 2008 .

[33]  Jinyang Zheng,et al.  Recent developments on damage modeling and finite element analysis for composite laminates: A review , 2010 .

[34]  George J. Dvorak,et al.  Analysis of Progressive Matrix Cracking in Composite Laminates I. Thermoelastic Properties of a Ply with Cracks , 1985 .

[35]  Zdenek P. Bazant,et al.  CRACK BAND MODEL FOR FRACTURE OF GEOMATERIALS. , 1982 .

[36]  In-Plane fracture of laminated fiber reinforced composites with varying fracture resistance: Experimental observations and numerical crack propagation simulations , 2009 .

[37]  Craig S. Collier,et al.  An Efficient Semi-Analytical Framework for Micromechanical Modeling of Transverse Cracks in Fiber-reinforced Composites , 2010 .

[38]  Krishna Rudraraju.  On the theory and numerical simulation of cohesive crack propagation with application to fiber-reinforced composites , 2011 .

[39]  John A. Nairn,et al.  The Strain Energy Release Rate of Composite Microcracking: A Variational Approach , 1989 .

[40]  Jacob Fish,et al.  Computational damage mechanics for composite materials based on mathematical homogenization , 1999 .

[41]  Richard Schapery,et al.  FEM Implementation of a Three-Dimensional Viscoelastic Constitutive Model for Particulate Composites with Damage Growth , 2004 .

[42]  Somnath Ghosh,et al.  A two-dimensional automatic mesh generator for finite element analysis for random composites , 1991 .

[43]  Guruswami Ravichandran,et al.  Failure mode transition in ceramics under dynamic multiaxial compression , 2000 .

[44]  J. Aboudi.  Mechanics of composite materials - A unified micromechanical approach , 1991 .

[45]  A. Cemal Eringen,et al.  A unified theory of thermomechanical materials , 1966 .

[46]  R. Borst,et al.  Non-orthogonal cracks in a smeared finite element model , 1985 .

[47]  G. I. Barenblatt.  THE MATHEMATICAL THEORY OF EQUILIBRIUM CRACKS IN BRITTLE FRACTURE , 1962 .

[48]  R. M. Christensen,et al.  Effective Stiffness of Randomly Oriented Fibre Composites , 1972 .

[49]  Ted Belytschko,et al.  Computability in non‐linear solid mechanics , 2001 .

[50]  Michael R Wisnom,et al.  An experimental investigation into the tensile strength scaling of notched composites , 2007 .

[51]  I..,et al.  The Phenomena of Rupture and Flow in Solids , 2011 .

[52]  John T. Wang.  Relating Cohesive Zone Model to Linear Elastic Fracture Mechanics , 2013 .

[53]  Ramesh Talreja,et al.  A continuum mechanics characterization of damage in composite materials , 1985, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[54]  Zenon Mróz,et al.  Finite element analysis of deformation of strain‐softening materials , 1981 .

[55]  D. S. Dugdale.  Yielding of steel sheets containing slits , 1960 .

[56]  David H. Allen,et al.  Multiscale Modeling and Simulation of Composite Materials and Structures , 2008 .

[57]  L. McCartney.  Theory of stress transfer in a 0°—90°—0° cross-ply laminate containing a parallel array of transverse cracks , 1992 .

[58]  Zdenek P. Bazant,et al.  Can Multiscale-Multiphysics Methods Predict Softening Damage and Structural Failure? , 2010 .

[59]  N. Takeda,et al.  Tensile strength of CFRP cross-ply laminates containing transverse cracks , 2006 .

[60]  Jacob Aboudi,et al.  Damage in composites—Modeling of imperfect bonding , 1987 .

[61]  Charles E. Harris,et al.  Internal State Variable Approach for Predicting Stiffness Reductions in Fibrous Laminated Composites with Matrix Cracks , 1989 .

[62]  Hugh Shercliff,et al.  Failure processes in composite materials: getting physical , 2006 .

[63]  Zdenek P. Bazant,et al.  Nonlocal Damage Theory Based on Micromechanics of Crack Interactions , 1994 .

[64]  J. Llorca,et al.  Influence of the loading path on the strength of fiber-reinforced composites subjected to transverse compression and shear , 2008 .

[65]  Richard Schapery,et al.  Prediction of compressive strength and kink bands in composites using a work potential , 1995 .

[66]  G. Dvorak.  Transformation field analysis of inelastic composite materials , 1992, Proceedings of the Royal Society of London. Series A: Mathematical and Physical Sciences.

[67]  Craig S. Collier,et al.  Computational Implementation of a Thermodynamically Based Work Potential Model For Progressive Microdamage and Transverse Cracking in Fiber-Reinforced Laminates , 2010 .

[68]  S. Baxter,et al.  The effect of fiber architecture on the inelastic response of metal matrix composites with interfacial and fiber damage , 1996 .

[69]  B. Schrefler,et al.  Multiscale Methods for Composites: A Review , 2009 .

[70]  A. Waas,et al.  A Multiscale Crack Path Predicting Computational Method for Laminated Fiber Reinforced Composites , 2008 .

[71]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .

[72]  A. Waas,et al.  A failure criterion for fiber reinforced polymer composites under combined compression–torsion loading , 2003 .

[73]  K. P. Walker,et al.  Nonlinear mesomechanics of composites with periodic microstructure , 1989 .

[74]  J. Aboudi,et al.  Nonlinear micromechanical formulation of the high fidelity generalized method of cells , 2009 .

[75]  A. Waas,et al.  The influence of adhesive constitutive parameters in cohesive zone finite element models of adhesively bonded joints , 2009 .

[76]  Ted Belytschko,et al.  AN EXTENDED FINITE ELEMENT METHOD (X-FEM) FOR TWO- AND THREE-DIMENSIONAL CRACK MODELING , 2000 .

[77]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[78]  R. De Borst,et al.  Transverse Failure Behavior of Fiber-epoxy Systems , 2010 .

[79]  R. J. Nuismer,et al.  A Theory for Progressive Matrix Cracking in Composite Laminates , 1989 .

[80]  Craig S. Collier,et al.  A Multiscale Progressive Damage and Failure Modeling Approach for Laminated Fiber Reinforced Composites , 2009 .

[81]  J. Michel,et al.  Nonuniform transformation field analysis , 2003 .

[82]  Wing Kam Liu,et al.  Nonlinear Finite Elements for Continua and Structures , 2000 .

[83]  Z. Bieniawski.  Brittle Rock Fracture Propagation in Rock Under Compression , 2007 .

[84]  R. Borst,et al.  Analysis of Mixed-Mode Fracture in Concrete , 1987 .

[85]  Anthony M. Waas,et al.  Computational modeling of failure in composite structures including uncertainties in material and geometrical properties , 2011 .

[86]  H. Schürmann,et al.  FAILURE ANALYSIS OF FRP LAMINATES BY MEANS OF PHYSICALLY BASED PHENOMENOLOGICAL MODELS , 1998 .

[87]  Somnath Ghosh,et al.  Voronoi cell finite element model based on micropolar theory of thermoelasticity for heterogeneous materials , 1995 .

[88]  De Xie,et al.  Discrete Cohesive Zone Model to Simulate Static Fracture in 2D Triaxially Braided Carbon Fiber Composites , 2006 .

[89]  S. Arnold,et al.  Testing the Predictive Capability of the High-Fidelity Generalized Method of Cells Using an Efficient Reformulation , 2013 .

[90]  Carlos González,et al.  Effect of fiber, matrix and interface properties on the in-plane shear deformation of carbon-fiber reinforced composites , 2010 .

[91]  Shiladitya Basu.  Computational modeling of progressive failure and damage in composite laminates. , 2005 .

[92]  A. Reuss,et al.  Berechnung der Fließgrenze von Mischkristallen auf Grund der Plastizitätsbedingung für Einkristalle . , 1929 .

[93]  Anthony M. Waas,et al.  Efficient and Robust Traction Laws for the Modeling of Adhesively Bonded Joints , 2008 .

[94]  M. Paley,et al.  Micromechanical analysis of composites by the generalized cells model , 1992 .

[95]  Pedro P. Camanho,et al.  A damage model for the simulation of delamination in advanced composites under variable-mode loading , 2006 .

[96]  M. Pankow.  The Deformation Response of 3D Woven Composites Subjected to High Rates of Loading. , 2010 .

[97]  B. Bednarcyk,et al.  Modeling Progressive Damage Using Local Displacement Discontinuities Within the FEAMAC Multiscale Modeling Framework , 2010 .

[98]  R. Borst.  Computation of post-bifurcation and post-failure behavior of strain-softening solids , 1987 .

[99]  J. Chaboche,et al.  Mechanics of Solid Materials , 1990 .

[100]  Milan Jirásek,et al.  Nonlocal models for damage and fracture: Comparison of approaches , 1998 .

[101]  Somnath Ghosh,et al.  Multiple scale analysis of heterogeneous elastic structures using homogenization theory and voronoi cell finite element method , 1995 .

[102]  Craig S. Collier,et al.  Progressive damage and failure modeling in notched laminated fiber reinforced composites , 2009 .

[103]  Sia Nemat-Nasser,et al.  On composites with periodic structure , 1982 .

[104]  Anthony M. Waas,et al.  Characterization of the in-situ non-linear shear response of laminated fiber-reinforced composites , 2010 .

[105]  Prasad B. Chunchu,et al.  Comparison of Damage Path Predictions for Composite Laminates by Explicit and Standard Finite Element Analysis Tools , 2006 .

[106]  Ted Belytschko,et al.  Arbitrary discontinuities in finite elements , 2001 .

[107]  P. Camanho,et al.  Prediction of size effects in notched laminates using continuum damage mechanics , 2007 .

[108]  Jacob Fish,et al.  Eigendeformation-based reduced order homogenization for failure analysis of heterogeneous materials , 2007 .

[109]  J. Rice.  Inelastic constitutive relations for solids: An internal-variable theory and its application to metal plasticity , 1971 .

[110]  S. Nemat-Nasser,et al.  Brittle failure in compression: splitting faulting and brittle-ductile transition , 1986, Philosophical Transactions of the Royal Society of London. Series A, Mathematical and Physical Sciences.

[111]  Zvi Hashin,et al.  The Elastic Moduli of Heterogeneous Materials , 1962 .

[112]  K. Tanaka,et al.  Average stress in matrix and average elastic energy of materials with misfitting inclusions , 1973 .

[113]  B. Bednarcyk,et al.  A New Local Debonding Model With Application to the Transverse Tensile and Creep Behavior of Continuously Reinforced Titanium Composites , 2000 .

[114]  Norman A. Fleck,et al.  Compressive Failure of Fiber Composites , 1997 .

[115]  Steven M. Arnold,et al.  Linear Thermoelastic Higher-Order Theory for Periodic Multiphase Materials , 2001 .

[116]  Z. Hashin,et al.  A Fatigue Failure Criterion for Fiber Reinforced Materials , 1973 .

[117]  De Xie,et al.  Discrete cohesive zone model for mixed-mode fracture using finite element analysis , 2006 .

[118]  Anthony M. Waas,et al.  Compressive Failure of Fiber Composites under Multi-Axial Loading , 2006 .

[119]  Craig S. Collier,et al.  A Novel Multiscale Physics Based Progressive Failure Methodology for Laminated Composite Structures , 2008 .

[120]  B. Bednarcyk,et al.  Fully Coupled Micro/Macro Deformation, Damage, and Failure Prediction for SiC/Ti-15-3 Laminates , 2002 .

[121]  Leslie Banks-Sills,et al.  Advances in Mathematical Modeling and Experimental Methods for Materials and Structures , 2009 .

[122]  B. Bednarcyk,et al.  Modeling Delamination in Composites via Continuum Interfacial Displacement Discontinuities , 2009 .

[123]  Wam Marcel Brekelmans,et al.  A continuum approach to brittle and fatigue damage: Theory and numerical procedures , 1993 .

[124]  Somnath Ghosh,et al.  Elastic-plastic analysis of arbitrary heterogeneous materials with the Voronoi Cell finite element method , 1995 .

[125]  L. McCartney,et al.  PREDICTING TRANSVERSE CRACK FORMATION IN CROSS-PLY LAMINATES 1 This article represents the author's , 1998 .

[126]  Steven M. Arnold,et al.  An Annotative Review of Multiscale Modeling and its Application to Scales Inherent in the Field of ICME , 2011 .

[127]  Richard Schapery,et al.  A theory of mechanical behavior of elastic media with growing damage and other changes in structure , 1990 .

[128]  R. Christensen,et al.  Solutions for effective shear properties in three phase sphere and cylinder models , 1979 .

[129]  On the finite element implementation of the generalized method of cells micromechanics constitutive model , 1995 .

[130]  R. J. Sanford.  Principles of Fracture Mechanics , 2002 .

[131]  Pierre Ladevèze,et al.  Multiscale modelling and computational strategies for composites , 2004 .

[132]  Steven M. Arnold,et al.  Micromechanics Modeling of Composites Subjected to Multiaxial Progressive Damage in the Constituents , 2010 .