Nanocrystalline ZrO2 ceramics with idealized macropores

[1]  Ferdi Schüth,et al.  Nanocasting: A Versatile Strategy for Creating Nanostructured Porous Materials , 2009 .

[2]  A. Boccaccini,et al.  Biodegradable and bioactive porous polymer/inorganic composite scaffolds for bone tissue engineering. , 2006, Biomaterials.

[3]  André R. Studart,et al.  Processing Routes to Macroporous Ceramics: A Review , 2006 .

[4]  Byong-Taek Lee,et al.  Microstructure and mechanical properties of porous yttria stabilized zirconia ceramic using poly methyl methacrylate powder , 2006 .

[5]  Paolo Colombo,et al.  Conventional and novel processing methods for cellular ceramics , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[6]  K. Maca,et al.  Effect of sintering schedule on grain size of oxide ceramics , 2005 .

[7]  H. Schubert,et al.  Clot-forming: the use of proteins as binders for producing ceramic foams , 2004 .

[8]  Georg Grathwohl,et al.  Transparent Alumina with Submicrometer Grains by Float Packing and Sintering , 2002 .

[9]  T. Mäntylä,et al.  Effect of sintering temperature and holding time on the properties of 3Y-ZrO2 microfiltration membranes , 2001 .

[10]  D. Lamas,et al.  X-ray diffraction study of compositionally homogeneous, nanocrystalline yttria-doped zirconia powders , 2000 .

[11]  Pettersson,et al.  Electrosteric Stabilization of Al(2)O(3), ZrO(2), and 3Y-ZrO(2) Suspensions: Effect of Dissociation and Type of Polyelectrolyte. , 2000, Journal of colloid and interface science.

[12]  L. Gauckler,et al.  Ceramic forming using enzyme catalyzed reactions , 1999 .

[13]  M. Coquerelle,et al.  Detailed characterisation of the rim microstructure in PWR fuels in the burn-up range 40–67 GWd/tM , 1996 .

[14]  S. D. Nunn,et al.  Gelcasting: From laboratory development toward industrial production , 1995 .

[15]  M. Swain.  Grain-size dependence of toughness and transformability of 2mol% Y-TZP ceramics , 1986 .

[16]  S. Sakaguchi,et al.  Superplasticity of yttria-stabilized tetragonal ZrO2 polycrystals , 1986 .

[17]  Anthony G. Evans,et al.  REVIEW—Transformation Toughening in Ceramics: Martensitic Transformations in Crack‐Tip Stress Fields , 1980 .

[18]  I. Cutler,et al.  Initial Sintering with Constant Rates of Heating , 1970 .

[19]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .

[20]  E. Teller,et al.  ADSORPTION OF GASES IN MULTIMOLECULAR LAYERS , 1938 .

[21]  G. Grathwohl,et al.  Zellularkeramik aus autarken Schaumungsprozessen keramischer Suspensionen, Teil 2 , 2007 .

[22]  Carmen Galassi,et al.  Processing of porous ceramics : Piezoelectric materials , 2006 .

[23]  I. Santacruz,et al.  Alumina bodies with near-to-theoretical density by aqueous gelcasting using concentrated agarose solutions , 2005 .

[24]  K. Maca,et al.  BULK ZIRCONIA NANOCERAMICS PREPARED BY COLD ISOSTATIC PRESSING AND PRESSURELESS SINTERING , 2005 .

[25]  Y. Sakka,et al.  Preparation of porous materials with controlled pore size and porosity , 2004 .

[26]  Michael J. Hoffmann,et al.  Preparation of interpenetrating ceramic–metal composites , 2004 .

[27]  R. Greenwood,et al.  Acoustophoretic studies of aqueous suspensions of alumina and 8 mol% yttria stabilised zirconia powders , 2000 .

[28]  L. Gauckler,et al.  Centrifugal slip casting of zirconia (TZP) , 1994 .

[29]  A. Burggraaf,et al.  Sintering kinetics and microstructure development of nanoscale Y-TZP ceramics , 1993 .

[30]  R. A. Strehlow,et al.  Gelcasting : a new ceramic forming process , 1991 .

[31]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .

[32]  F. F. Lange,et al.  Transformation toughening , 1982 .

[33]  N. Claussen.  Fracture Toughness of Al2O3 with an Unstabilized ZrO2Dispersed Phase , 1976 .