External loads identification and shape sensing on an aluminum wing box: An integrated approach

Abstract The recent development of the Structural Health Monitoring (SHM) framework has required the simultaneous development of the tools fundamentals for its realization. The shape sensing methods and the loads identification ones have established themselves as crucial tools for the monitoring of aerospace structures. The two families of methods have been developed separately, although the possibility to achieve the knowledge of the displacement field and of the external loads together can enable a further progress in the SHM. In this paper, an integrated approach to simultaneously preform loads identification and shape sensing from discrete strain measurements is proposed. The methods is based on a two-steps process. The first step involves the identification of continuously distributed and concentrated external loads from discrete strain measurements. This step is achieved by discretizing the loads with Finite Elements (FE) and by computing the coefficients of influence between the nodal values of the loads and the discrete strain measurements. The second step reduces the shape sensing inverse problem to a simple direct Finite Element Analysis. The loads identified in the previous step are applied to a refined FE model of the structure and the displacement field is easily obtained through a direct FE analysis. This investigation proves that the two-steps method can accurately identify the loads and the displacement field of a wing box subject to an aerodynamic pressure distribution and a set of concentrated forces, when a sufficient number of strain information is available. When the number of discrete strain measurements decreases or the strains are affected by measurement error, the loads are poorly predicted but the method is still capable of an extremely accurate displacements reconstruction.

[1]  Robert D. Cook,et al.  Four-node ‘flat’ shell element: Drilling degrees of freedom, membrane-bending coupling, warped geometry, and behavior , 1994 .

[2]  Daniel J. Inman,et al.  A Review of Morphing Aircraft , 2011 .

[3]  Alexander Tessler,et al.  Full-Field Reconstruction of Structural Deformations and Loads from Measured Strain Data on a Wing Using the Inverse Finite Element Method , 2016 .

[4]  E. Haugse,et al.  Structural Shape Identification from Experimental Strains Using a Modal Transformation Technique , 2003 .

[5]  Toni Kanakis,et al.  Load Monitoring by Means of Optical Fibres and Strain Gages , 2016 .

[6]  Pavel M. Trivailo,et al.  The inverse determination of aerodynamic loading from structural response data using neural networks , 2006 .

[7]  Erkan Oterkus,et al.  Dent damage identification in stiffened cylindrical structures using inverse Finite Element Method , 2020 .

[8]  Cameron W. Coates,et al.  Inverse Method Using Finite Strain Measurements to Determine Flight Load Distribution Functions , 2008 .

[9]  Chan-Gi Pak,et al.  Wing Shape Sensing from Measured Strain , 2015 .

[10]  William L. Ko,et al.  Displacement Theories for In-Flight Deformed Shape Predictions of Aerospace Structures , 2013 .

[11]  Marco Gherlone,et al.  Shape sensing methods: Review and experimental comparison on a wing-shaped plate , 2018 .

[12]  Alexander Tessler,et al.  An Inverse Interpolation Method Utilizing In-Flight Strain Measurements for Determining Loads and Structural Response of Aerospace Vehicles , 2001 .

[13]  Umberto Papa,et al.  Health structure monitoring for the design of an innovative UAS fixed wing through inverse finite element method (iFEM) , 2017 .

[14]  Hirotaka Igawa,et al.  Inverse identification of continuously distributed loads using strain data , 2012 .

[15]  Chongyu Hua,et al.  An inverse transformation for quadrilateral isoparametric elements: Analysis and application , 1990 .

[16]  Emilio Turco,et al.  Load distribution modelling for pin-jointed trusses by an inverse approach , 1998 .

[17]  Samson B. Cooper,et al.  Static load estimation using artificial neural network: Application on a wing rib , 2018, Adv. Eng. Softw..

[18]  M. Gherlone,et al.  An inverse finite element method for beam shape sensing: theoretical framework and experimental validation , 2014 .

[19]  B. Soller,et al.  High resolution optical frequency domain reflectometry for characterization of components and assemblies. , 2005, Optics express.

[20]  Guoping Ding,et al.  Strain - deformation reconstruction of CFRP laminates based on Ko displacement theory , 2020 .

[21]  E. Haugse,et al.  Using Modal Test Results to Develop Strain to Displacement Transformations , 1995 .

[22]  Alexander Tessler,et al.  A quadrilateral inverse-shell element with drilling degrees of freedom for shape sensing and structural health monitoring , 2016 .

[23]  Marco Esposito,et al.  Composite wing box deformed-shape reconstruction based on measured strains: Optimization and comparison of existing approaches , 2020 .

[24]  Pierangelo Masarati,et al.  In-flight health monitoring of helicopter blades via differential analysis , 2019, Aerospace Science and Technology.

[25]  Yohei Sugimoto,et al.  Inverse analysis of aerodynamic loads from strain information using structural models and neural networks , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[26]  Flavio J. Silvestre,et al.  Gust load alleviation in a flexible smart idealized wing , 2019, Aerospace Science and Technology.

[27]  Craig A. Stephens,et al.  Deformed Shape Calculation of a Full-Scale Wing Using Fiber Optic Strain Data from a Ground Loads Test , 2013 .

[28]  Erkan Oterkus,et al.  Isogeometric iFEM Analysis of Thin Shell Structures † , 2020, Sensors.

[29]  Erkan Oterkus,et al.  Displacement and stress monitoring of a Panamax containership using inverse finite element method , 2016 .

[30]  Cameron W. Coates,et al.  An Inverse Method for Selection of Fourier Coefficients for Flight Load Identification , 2005 .

[31]  Marco Gherlone,et al.  Real-time displacement monitoring of a composite stiffened panel subjected to mechanical and thermal loads , 2015 .

[32]  P. Bettini,et al.  Strain field reconstruction on composite spars based on the identification of equivalent load conditions , 2017, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[33]  M. Tur,et al.  Fiber-Optics-Based Aeroelastic Shape Sensing , 2019 .

[34]  Marco Gherlone,et al.  Shape sensing of 3D frame structures using an inverse Finite Element Method , 2012 .

[35]  Raffaella Di Sante,et al.  Fibre Optic Sensors for Structural Health Monitoring of Aircraft Composite Structures: Recent Advances and Applications , 2015, Sensors.