Computational Thermal-Fluid Analysis of a Microtubular Solid Oxide Fuel Cell

A computational fluid dynamics model is developed to study the steady-state behavior of a microtubular solid oxide fuel cell (SOFC). The model incorporates mass, momentum, species, and heat balances along with ionic and electronic charge transfers. The anode-supported SOFC studied in this work consists of a ceria-based electrolyte which is known as an electronic conductor in reducing atmospheres, letting electrons leak through the electrolyte. Related internal leakage currents are calculated implicitly in the model to incorporate the performance losses. Moreover, to have a more realistic approach while cutting down the computational effort, in this study a fuel cell test furnace is also modeled separately to evaluate the distribution of the oxygen concentration and temperature field inside the furnace. Results from the furnace model are used as boundary conditions for the fuel cell model. Fuel cell model results are compared with the experimental data which shows good agreement. © 2008 The Electrochemical Society, [DOI: 10.1149/1.2971194]All rights reserved.

[1]  C. Xia.  Microstructures, conductivities, and electrochemical properties of Ce0.9Gd0.1O2 and GDC–Ni anodes for low-temperature SOFCs , 2002 .

[2]  J. D. Carter,et al.  Development of Solid‐Oxide Fuel Cells That Operate at 500°C , 1999 .

[3]  Masamichi Ippommatsu,et al.  Preparation of Nickel Pattern Electrodes on YSZ and Their Electrochemical Properties in  H 2 ‐  H 2 O  Atmospheres , 1994 .

[4]  Paola Costamagna,et al.  Modeling of Solid Oxide Heat Exchanger Integrated Stacks and Simulation at High Fuel Utilization , 1998 .

[5]  I. Riess.  Theoretical Treatment of the Transport Equations for Electrons and Ions in a Mixed Conductor , 1981 .

[6]  N. Sammes,et al.  Design and fabrication of a 100 W anode supported micro-tubular SOFC stack , 2005 .

[7]  M. Mori,et al.  Fabrication and characterization of micro-tubular cathode-supported SOFC for intermediate temperature operation , 2007 .

[8]  N. Nakagawa,et al.  Study on the Extension of Reaction Zone from Ni/YSZ Interface by Using Fixed Film Electrodes , 1995 .

[9]  Kevin Kendall,et al.  A small solid oxide fuel cell demonstrator for microelectronic applications , 1998 .

[10]  J.P.P. Huijsmans,et al.  Intermediate temperature SOFC – a promise for the 21st century , 1998 .

[11]  Z. Lü,et al.  Synthesis, electrical and electrochemical properties of Ba0.5Sr0.5Zn0.2Fe0.8O3−δ perovskite oxide for IT-SOFC cathode , 2008 .

[12]  H. Yakabe,et al.  3D simulation on the current path in planar SOFCs , 2004 .

[13]  D. E. Mann,et al.  Infrared Absorption Spectra of B2O3, B2O2, and BO2 in Solid Argon Matrices , 1963 .

[14]  K. Kendall,et al.  Cycling of three solid oxide fuel cell types , 2007 .

[15]  N. Brandon,et al.  Modelling of cells, stacks and systems based around metal-supported planar IT-SOFC cells with CGO electrolytes operating at 500–600 °C , 2005 .

[16]  D. Tannhauser.  The Theoretical Energy Conversion Efficiency of a High Temperature Fuel Cell Based on a Mixed Conductor , 1978 .

[17]  L. Gauckler,et al.  Perovskite cathodes for solid oxide fuel cells based on ceria electrolytes , 1996 .

[18]  Yuwen Zhang,et al.  Thermodynamics of Multiphase Systems , 2006 .

[19]  Y. Çengel,et al.  Thermodynamics : An Engineering Approach , 1989 .

[20]  Pedro Nehter.  Two-dimensional transient model of a cascaded micro-tubular solid oxide fuel cell fed with methane , 2006 .

[21]  H. Schmalzried.  Ionen- und Elektronenleitung in binären Oxiden und ihre Untersuchung mittels EMK-Messungen , 1963 .

[22]  B. Steele.  Materials for IT-SOFC stacks: 35 years R&D: the inevitability of gradualness? , 2000 .

[23]  Brian C. H. Steele,et al.  Appraisal of Ce1−yGdyO2−y/2 electrolytes for IT-SOFC operation at 500°C , 2000 .

[24]  Amir Faghri,et al.  Transport Phenomena in Multiphase Systems , 2006 .

[25]  Hiroaki Tagawa,et al.  Reaction kinetics at the nickel pattern electrode on YSZ and its dependence on temperature , 1995 .

[26]  M. Chyu,et al.  Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack , 2003 .

[27]  Wei-Mon Yan,et al.  Performance simulation for an anode-supported SOFC using Star-CD code , 2007 .

[28]  Charles W. Tobias,et al.  On the Conductivity of Dispersions , 1959 .

[29]  N. Choudhury,et al.  Performance characteristics of solid electrolytes under steady-state conditions. [Yttria-doped thoria, 1600/sup 0/C] , 1971 .

[30]  Nigel P. Brandon,et al.  The impact of wood-derived gasification gases on Ni-CGO anodes in intermediate temperature solid oxide fuel cells , 2004 .

[31]  Tohru Kato,et al.  Performance of a La0.6Sr0.4Co0.8Fe0.2O3–Ce0.8Gd0.2O1.9–Ag cathode for ceria electrolyte SOFCs , 2002 .

[32]  L. Gauckler,et al.  Engineering of Solid Oxide Fuel Cells with Ceria‐Based Electrolytes , 1998 .

[33]  Toshiaki Yamaguchi,et al.  Improvement of SOFC Performance Using a Microtubular, Anode-Supported SOFC , 2006 .