Performance of MEA in a long-term test at the post-combustion capture pilot plant in Niederaussem

Abstract RWE Power, BASF and Linde entered into a cooperation in 2007 to adapt the CO2-scrubbing technology for application in power plants and to optimize significantly the technical and economic performance of CO2 post-combustion capture. All aspects of the capture process on the basis of new energy-efficient solvents developed by BASF and the improved plant technology by Linde are investigated in a pilot plant at RWE Power's lignite-fired power station in Niederaussem, Germany. Some 250 measurements and an online-gas analysis system allow a detailed validation of the operational performance of the plant and a precise determination of the energy demand for the CO2 capture process. In extensive accompanying analysis programs, solvent stability and the formation of degradation products and emissions are investigated. Including commissioning, start up and extensive parameter studies, the pilot plant was in operation for more than 5000 h with 30%-weight MEA as benchmark solvent from mid-2009 until January 2010. During this time, all aspects of the optimized process configuration were tested and compared with modeling results and literature data. This paper describes the performance validation approach on the basis of the results of the measurement program (specific energy demand: 3.5 GJ/tCO2) and the investigation of the time-dependence of MEA degradation and organic acid formation under real power plant operating conditions (MEA loss: 0.3 kg/tCO2; after 5000 h of operation weight-related content of acetate: 1.8%, formate: 0.2% and oxalate:

[1]  Peter Moser,et al.  The post-combustion capture pilot plant Niederaussem–Results of the first half of the testing programme , 2011 .

[2]  Jacob Nygaard Knudsen,et al.  First year operating experience with a 1 t/h CO2 absorption : Pilot plant at Esbjerg coal-fired power plant , 2007 .

[3]  Norbert Asprion,et al.  Nonequilibrium rate-based simulation of reactive systems : Simulation model, heat transfer, and influence of film discretization , 2006 .

[4]  Lawrence B. Evans,et al.  A local composition model for the excess Gibbs energy of aqueous electrolyte systems , 1986 .

[5]  Alan E. Mather,et al.  Use of Flow Calorimetry for Determining Enthalpies of Absorption and the Solubility of CO2 in Aqueous Monoethanolamine Solutions , 1998 .

[6]  Peter Moser,et al.  Investigation of trace elements in the inlet and outlet streams of a MEA-based post-combustion capture process results from the test programme at the Niederaussem pilot plant , 2011 .

[7]  Curt M. White,et al.  Degradation Pathways for Monoethanolamine in a CO2 Capture Facility , 2003 .

[8]  Jacob Nygaard Knudsen,et al.  Evaluation of process upgrades and novel solvents for the post combustion CO2 capture process in pilot-scale , 2011 .

[9]  Jacob Nygaard Knudsen,et al.  Experience with CO2 capture from coal flue gas in pilot-scale: Testing of different amine solvents , 2009 .

[10]  Alan E. Mather,et al.  The solubility of CO2 in a 30 mass percent monoethanolamine solution , 1995 .

[11]  Tim Cockerill,et al.  Proceedings of the 10th International Conference on Greenhouse Gas Control Technologies , 2010 .

[12]  Peter Moser,et al.  Enabling post combustion capture optimization–The pilot plant project at Niederaussem , 2009 .

[13]  Hallvard F. Svendsen,et al.  Comparison of MEA degradation in pilot-scale with lab-scale experiments , 2011 .

[14]  Wei-Kang Yuan,et al.  The behavoir of packed bed electrode reactor , 1992 .

[15]  Geert Versteeg,et al.  Kinetics of CO2 with primary and secondary amines in aqueous solutions - II. Influence of temperature on zwitterion formation and deprotonation rates , 1992 .

[16]  Axel Meisen,et al.  CO2 absorption by NaOH, monoethanolamine and 2-amino-2-methyl-1-propanol solutions in a packed column , 1992 .