The working principle of a vortex tube

The generation of cold and hot streams from a single injection in a vortex tube has been investigated by many researchers, aiming to define the primary reasons for the separation. This paper reports a detailed description of the flow behaviour inside a vortex tube and addresses the mechanism for the generation of cold and hot streams in a vortex tube, which is confirmed by different experimental methodologies, including visualization of the flow structure in a water-operated vortex tube, and measurement of velocity profiles in both water- and air-operated vortex tubes. Estimation of the theoretical temperature drop based on the pressure gradient of a forced vortex flow is addressed in this paper, and good agreement with the experimental results was observed. Exergy analysis of the flow properties in an air-operated vortex tube indicates that there is no outward energy transfer in the hot region of the vortex tube. Furthermore, the governing factor for the temperature rise is attributed to the stagnation and mixture of the flow structure. Based on the proposed mechanism, the predicted performance of the vortex tube with variable geometrical parameters, were congruent with the experimental results, underpinning the validity of the proposed mechanism.

[1]  Y. Xue,et al.  An Investigation on the Effect of the Hot End Plugs on the Efficiency of the Ranque-Hilsch Vortex Tube , 2007 .

[2]  C. Gao.  Experimental study on the Ranque-Hilsch vortex tube , 2005 .

[3]  Maziar Arjomandi,et al.  Experimental study of the thermal separation in a vortex tube , 2013 .

[4]  J. E. Lay.  An Experimental and Analytical Study of Vortex-Flow Temperature Separation by Superposition of Spiral and Axial Flows: Part 1 , 1959 .

[5]  Chong-fang Ma,et al.  Modification and experimental research on vortex tube , 2007 .

[6]  M. Kaya,et al.  A review on design criteria for vortex tubes , 2009 .

[7]  B. Ahlborn,et al.  Secondary flow in a vortex tube , 1997 .

[8]  Maziar Arjomandi,et al.  Experimental study of the flow structure in a counter flow Ranque–Hilsch vortex tube , 2012 .

[9]  Orhan Aydin,et al.  An experimental study on the design parameters of a counterflow vortex tube , 2006 .

[10]  B. Shannak.  Temperature separation and friction losses in vortex tube , 2004 .

[11]  Karl Stephan,et al.  An investigation of energy separation in a vortex tube , 1983 .

[12]  Pongjet Promvonge,et al.  Review of Ranque-Hilsch effects in vortex tubes , 2008 .

[13]  Maziar Arjomandi,et al.  Visualization of the flow structure in a vortex tube , 2011 .

[14]  Subhash Jacob,et al.  Numerical investigations on flow behaviour and energy separation in Ranque–Hilsch vortex tube , 2008 .

[15]  M. Arjomandi,et al.  The effect of vortex angle on the efficiency of the Ranque–Hilsch vortex tube , 2008 .

[16]  H. H. Bruun.  Experimental Investigation of the Energy Separation in Vortex Tubes , 1969 .

[17]  A. Straatman,et al.  Thermodynamics of angular propulsion in fluids. , 2012, Physical review letters.

[18]  Maziar Arjomandi,et al.  A critical review of temperature separation in a vortex tube , 2010 .

[19]  Orhan Aydin,et al.  An experimental study on the effect of the valve angle of counter-flow Ranque–Hilsch vortex tubes on thermal energy separation , 2010 .

[20]  S. Eiamsa-ard,et al.  Investigation on the Vortex Thermal Separation in a Vortex Tube Refrigerator , 2005 .

[21]  J. Kuerten,et al.  Maxwell's demon in the Ranque-Hilsch vortex tube. , 2012, Physical review letters.