Performance increase for an open-cathode PEM fuel cell with humidity and temperature control

[1]  A.G. Stefanopoulou,et al.  Control of fuel cell breathing , 2004, IEEE Control Systems.

[2]  Hu Minqiang,et al.  A novel exact and universal approach for calculating the differential leakage related to harmonic waves in AC electric motors , 2004 .

[3]  M. Ouyang,et al.  Modeling and control of air stream and hydrogen flow with recirculation in a PEM fuel cell system - I. Control-oriented modeling , 2006 .

[4]  Luis A. M. Riascos,et al.  Relative humidity control in polymer electrolyte membrane fuel cells without extra humidification , 2008 .

[5]  A. K. Tangirala,et al.  Continuous bubble humidification and control of relative humidity of H2 for a PEMFC system , 2008 .

[6]  Zidong Wei,et al.  A Review of Water Management in Polymer Electrolyte Membrane Fuel Cells , 2009 .

[7]  Xin-Jian Zhu,et al.  Coolant circuit modeling and temperature fuzzy control of proton exchange membrane fuel cells , 2010 .

[8]  Attila Husar,et al.  Development and experimental validation of a dynamic thermal and water distribution model of an open cathode proton exchange membrane fuel cell , 2011 .

[9]  Liejin Guo,et al.  Dynamic characteristics of local current densities and temperatures in proton exchange membrane fuel cells during reactant starvations , 2012 .

[10]  Elham Hosseinzadeh,et al.  Thermal and water management of low temperature Proton Exchange Membrane Fuel Cell in fork-lift truck power system , 2013 .

[11]  B. Logan,et al.  Air humidity and water pressure effects on the performance of air-cathode microbial fuel cell cathodes , 2014 .

[12]  Robert G. Landers,et al.  Control-oriented modeling for open-cathode fuel cell systems , 2014, 2014 American Control Conference.

[13]  Qi Li,et al.  Net Power Control Based on Linear Matrix Inequality for Proton Exchange Membrane Fuel Cell System , 2014, IEEE Transactions on Energy Conversion.

[14]  V. Alopaeus,et al.  Modeling and experimental validation of H2 gas bubble humidifier for a 50 kW stationary PEMFC system , 2014 .

[15]  N. Djilali,et al.  In situ measurement of relative humidity in a PEM fuel cell using fibre Bragg grating sensors , 2014 .

[16]  S. Kær,et al.  Thermal modeling and temperature control of a PEM fuel cell system for forklift applications , 2014 .

[17]  Qi Li,et al.  Development of energy management system based on a power sharing strategy for a fuel cell-battery-supercapacitor hybrid tramway , 2015 .

[18]  Jianqiu Li,et al.  Model-based temperature regulation of a PEM fuel cell system on a city bus , 2015 .

[19]  Ya-Xiong Wang,et al.  Feedforward fuzzy-PID control for air flow regulation of PEM fuel cell system , 2015 .

[20]  Keith Scott,et al.  Numerical study of the effect of relative humidity and stoichiometric flow ratio on PEM (proton exchange membrane) fuel cell performance with various channel lengths: An anode partial flooding modelling , 2016 .

[21]  Mohsen Ghazikhani,et al.  Numerical and experimental investigation on effects of inlet humidity and fuel flow rate and oxidant on the performance on polymer fuel cell , 2016 .

[22]  Kyoungyoun Kim,et al.  Numerical study on the effects of gas humidity on proton-exchange membrane fuel cell performance , 2016 .

[23]  Young-Bae Kim,et al.  Temperature Control for a Polymer Electrolyte Membrane Fuel Cell by Using Fuzzy Rule , 2016, IEEE Transactions on Energy Conversion.

[24]  Abas Ramiar,et al.  Dynamic modeling and validation studies of dead-end cascade H2/O2 PEM fuel cell stack with integrated humidifier and separator , 2016 .

[25]  Yong Chan Kim,et al.  Analysis of the system efficiency of an intermediate temperature proton exchange membrane fuel cell at elevated temperature and relative humidity conditions , 2016 .

[26]  Wei Li,et al.  Development and Experimental Validation of a Physics-Based PEM Fuel Cell Model for Cathode Humidity Control Design , 2016, IEEE/ASME Transactions on Mechatronics.

[27]  K. Friedrich,et al.  Analysis of the Influence of Temperature and Gas Humidity on the Performance Stability of Polymer Electrolyte Membrane Fuel Cells , 2016 .

[28]  Ya-Xiong Wang,et al.  Performance Optimization for Open‐cathode Fuel Cell Systems with Overheating Protection and Air Starvation Prevention , 2017 .