Thermomechanical effects in the torsional actuation of twisted nylon 6 fiber

Thermally induced torsional and tensile actuators based on twisted polymeric fibers have opened new opportunities for the application of artificial muscles. These newly developed actuators show significant torsional deformations when subjected to temperature changes, and this torsional actuation is the defining mechanism for tensile actuation of twisted and coiled fibers. To date it has been found that these actuators require multiple heat/cool cycles (referred to as training cycles) prior to obtaining a fully reversible actuation response. Herein, the effect of annealing conditions applied to twisted nylon 6 monofilament is investigated and it is shown that annealing at 200 degrees C eliminates the need for the training cycles. Furthermore, the effect of an applied external torque on the torsional actuation is also investigated and torsional creep is shown to be affected by the temperature and load. (c) 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45529.

[1]  Ray H. Baughman,et al.  Harvesting Temperature Fluctuations as Electrical Energy Using Torsional and Tensile Polymer Muscles , 2015 .

[2]  W. Kuhn,et al.  Reliable Measurements of the Nylon 6 Glass Transition Made Possible by the New Dynamic DSC , 1995 .

[3]  C. Haines,et al.  Hybrid carbon nanotube yarn artificial muscle inspired by spider dragline silk , 2014, Nature Communications.

[4]  Kevin S. Fancey,et al.  A mechanical model for creep, recovery and stress relaxation in polymeric materials , 2005 .

[5]  P. Wyeth,et al.  Effects of heat on new and aged polyamide 6,6 textiles during pest eradication , 2014 .

[6]  Carter S. Haines,et al.  Artificial Muscles from Fishing Line and Sewing Thread , 2014, Science.

[7]  G. Spinks,et al.  Controlled and scalable torsional actuation of twisted nylon 6 fiber , 2016 .

[8]  T. Kunugi,et al.  Application of a continuous zone-drawing method to nylon 66 fibres , 1998 .

[9]  Seyed M. Mirvakili,et al.  Niobium Nanowire Yarns and their Application as Artificial Muscles , 2013 .

[10]  Carter S. Haines,et al.  Electrically, Chemically, and Photonically Powered Torsional and Tensile Actuation of Hybrid Carbon Nanotube Yarn Muscles , 2012, Science.

[11]  A. Cherubini,et al.  Experimental characterization of thermally-activated artificial muscles based on coiled nylon fishing lines , 2015 .

[12]  Weileun Fang,et al.  A novel microelectrostatic torsional actuator , 2000 .

[13]  Nan Chen,et al.  Moisture‐Activated Torsional Graphene‐Fiber Motor , 2014, Advanced materials.

[14]  James L. White,et al.  Drawing and annealing of polypropylene fibers: Structural changes and mechanical properties , 1978 .

[15]  G. Hinrichsen.  The role of water in polyamides , 1978 .

[16]  H. Fong,et al.  Crystalline Morphology and Polymorphic Phase Transitions in Electrospun Nylon 6 Nanofibers. , 2007, Macromolecules.

[17]  R. Josephson.  Contraction dynamics and power output of skeletal muscle. , 1993, Annual review of physiology.

[18]  Hugh R. Brown,et al.  Characterisation of torsional actuation in highly twisted yarns and fibres , 2015 .

[19]  R. Séguéla,et al.  Effect of water absorption on the plastic deformation behavior of nylon 6 , 2009 .

[20]  T. D. Fornes,et al.  Crystallization behavior of nylon 6 nanocomposites , 2003 .

[21]  I. Boukal.  Effect of water on the mechanism of deformation of nylon 6 , 1967 .

[22]  Seon Jeong Kim,et al.  Torsional Carbon Nanotube Artificial Muscles , 2011, Science.

[23]  Rachel Z. Pytel,et al.  Artificial muscle technology: physical principles and naval prospects , 2004, IEEE Journal of Oceanic Engineering.

[24]  J. B. Park,et al.  Structure changes caused by strain annealing of nylon 6 fibers , 1978 .

[25]  M. Stamm,et al.  Structural changes accompanying hydration in nylon 6 , 1989 .