Waste Cooking Oil as an Alternate Feedstock for Biodiesel Production

As crude oil price reach a new high, the need for developing alternate fuels has become acute. Alternate fuels should be economically attractive in order to compete with currently used fossil fuels. In this work, biodiesel (ethyl ester) was prepared from waste cooking oil collected from a local restaurant in Halifax, Nova Scotia, Canada. Ethyl alcohol with sodium hydroxide as a catalyst was used for the transesterification process. The fatty acid composition of the final biodiesel esters was determined by gas chromatography. The biodiesel was characterized by its physical and fuel properties including density, viscosity, acid value, flash point, cloud point, pour point, cetane index, water and sediment content, total and free glycerin content, diglycerides and monoglycerides, phosphorus content and sulfur content according to ASTM standards. The viscosity of the biodiesel ethyl ester was found to be 5.03 mm 2 /sec at 40 o C. The viscosity of waste cooking oil measured in room temperature (at 21° C) was 72 mm 2 /sec. From the tests, the flash point was found to be 164 o C, the phosphorous content was 2 ppm, those of calcium and magnesium were 1 ppm combined, water and sediment was 0 %, sulfur content was 2 ppm, total acid number was 0.29 mgKOH/g, cetane index was 61, cloud point was -1 o C and pour point was -16 o C. Production of biodiesel from waste cooking oils for diesel substitute is particularly important because of the decreasing trend of economical oil reserves, environmental problems caused due to fossil fuel use and the high price of petroleum products in the international market.

[1]  Hsi-Hsien Yang,et al.  Effects of biodiesel on emissions of regulated air pollutants and polycyclic aromatic hydrocarbons under engine durability testing , 2007 .

[2]  K. Watts,et al.  The viscosities of three biodiesel fuels at temperatures up to 300 °C , 2006 .

[3]  Cecil A. W. Allen.  Prediction of biodiesel fuel atomization characteristics based on measured properties. , 1998 .

[4]  R. Korus,et al.  A rapid engine test to measure injector fouling in diesel engines using vegetable oil fuels , 1985 .

[5]  S. Iverson,et al.  STUDYING TROPHIC ECOLOGY IN MARINE ECOSYSTEMS USING FATTY ACIDS: A PRIMER ON ANALYSIS AND INTERPRETATION , 2006 .

[6]  D. G. Christian,et al.  Biomass for Renewable Energy, Fuels, and Chemicals , 2000 .

[7]  Lawrence A. Johnson,et al.  Use of branched-chain esters to reduce the crystallization temperature of biodiesel , 1995 .

[8]  A. Dalai,et al.  Preparation and characterization of bio-diesels from various bio-oils. , 2001, Bioresource technology.

[9]  Mustafa Canakci,et al.  The potential of restaurant waste lipids as biodiesel feedstocks. , 2007, Bioresource technology.

[10]  M. R. Islam,et al.  Analyzing Sustainability of Community-based Energy Technologies , 2007 .

[11]  M. G. Kulkarni,et al.  PRODUCTION OF BIODIESEL FROM WASTE FRYER GREASE USING MIXED METHANOL/ETHANOL SYSTEM , 2007 .

[12]  R. Rywotycki.  The effect of fat temperature on heat energy consumption during frying of food , 2002 .

[13]  A. Demirbas,et al.  Biodiesel fuels from vegetable oils via catalytic and non-catalytic supercritical alcohol transesterifications and other methods: a survey , 2003 .

[14]  William H. Kemp,et al.  Biodiesel Basics and Beyond: A Comprehensive Guide to Production and Use for the Home and Farm , 2006 .

[15]  M. G. Kulkarni,et al.  WASTE COOKING OIL – AN ECONOMICAL SOURCE FOR BIODIESEL: A REVIEW , 2006 .

[16]  D. Leung,et al.  Transesterification of neat and used frying oil : Optimization for biodiesel production , 2006 .

[17]  Marc A. Dubé,et al.  Acid-catalyzed production of biodiesel from waste frying oil , 2006 .