Experimental Evaluation and Predictive Control of an Air-Cored Linear Generator for Direct-Drive Wave Energy Converters

Direct-drive wave energy converters using linear generators (LGs) are attractive due to their high efficiency and reliability. Air-cored LGs, in particular, are receiving increasing attention due to the elimination of attraction forces between the stator and translator and the resulting reduction in structural mass. In this paper, details of the construction of a novel air-cored LG are presented. A custom test rig is constructed for testing the LG, particularly with zero overlap between its stator and translator at the stroke ends. Predictive control for maximum power transfer from the generator is first proposed and tested as a sensorless alternative to methods employing linear position feedback and electromotive force (EMF) estimation with sense coils. The control strategy is verified through simulation and measurements. It is also shown that allowing for zero stator-translator overlap at the stroke ends can improve the power-to-weight ratio compared to complete stator-translator overlap during the entire stroke.

[1]  Mats Leijon,et al.  Offshore underwater substation for wave energy converter arrays , 2010 .

[2]  Ping Ju,et al.  Optimal Control for AWS-Based Wave Energy Conversion System , 2009, IEEE Transactions on Power Systems.

[3]  Mats Leijon,et al.  Study of a longitudinal flux permanent magnet linear generator for wave energy converters , 2006 .

[4]  Mats Leijon,et al.  Farm size comparison with analytical model of linear generator wave energy converters , 2007 .

[5]  Erik Schaltz,et al.  Sensorless Model Predictive Direct Current Control Using Novel Second-Order PLL Observer for PMSM Drive Systems , 2011, IEEE Transactions on Industrial Electronics.

[6]  H. Polinder,et al.  Linear PM Generator system for wave energy conversion in the AWS , 2004, IEEE Transactions on Energy Conversion.

[7]  Poh Chiang Loh,et al.  An improved robust predictive current regulation algorithm , 2005, IEEE Transactions on Industry Applications.

[8]  J.-P. Gaubert,et al.  Predictive Direct Power Control of Three-Phase Pulsewidth Modulation (PWM) Rectifier Using Space-Vector Modulation (SVM) , 2010, IEEE Transactions on Power Electronics.

[9]  H. van der Broeck,et al.  Analysis and Realization of a Pulse Width Modulator Based on Voltage Space Vectors , 1986, 1986 Annual Meeting Industry Applications Society.

[10]  Jonathan Shek,et al.  Reaction force control of a linear electrical generator for direct drive wave energy conversion , 2007 .

[11]  S. Buso,et al.  Robust dead-beat current control for PWM rectifiers and active filters , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[12]  G. J. Dalton,et al.  Regulatory, technical and financial challenges in the grid connection of wave energy devices , 2010 .

[13]  T K A Brekken,et al.  A Permanent-Magnet Tubular Linear Generator for Ocean Wave Energy Conversion , 2010, IEEE Transactions on Industry Applications.

[14]  Silverio Bolognani,et al.  Design and Implementation of Model Predictive Control for Electrical Motor Drives , 2009, IEEE Transactions on Industrial Electronics.

[15]  Thomas G. Habetler,et al.  Design and implementation of an inverter output LC filter used for dv/dt reduction , 2002 .

[16]  António F.O. Falcão,et al.  Wave energy utilization: A review of the technologies , 2010 .

[17]  A. Ridge,et al.  Force ripple compensation in a tubular linear generator for marine renewable generation , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[18]  Peter Tavner,et al.  Experimental tests of an air-cored PM tubular generator for direct drive wave energy converters. , 2008 .

[19]  B. Das,et al.  Voltage control performance of AWS connected for grid operation , 2006, IEEE Transactions on Energy Conversion.

[20]  Osman Kukrer,et al.  Deadbeat control of a three-phase inverter with an output LC filter , 1996 .

[21]  Pcj Clifton,et al.  Design and commissioning of a 30 kW direct drive wave generator , 2010 .

[22]  Jonathan Shek,et al.  Experimental verification of linear generator control for direct drive wave energy conversion , 2010 .

[23]  Johannes Falnes,et al.  A REVIEW OF WAVE-ENERGY EXTRACTION , 2007 .

[24]  Peter Tavner,et al.  Power conversion and control for a linear direct drive permanent magnet generator for wave energy , 2011 .

[25]  Nick J. Baker,et al.  Modelling the performance of the vernier hybrid machine , 2003 .

[26]  Fabrizio Marignetti,et al.  A Tubular-Generator Drive For Wave Energy Conversion , 2006, IEEE Transactions on Industrial Electronics.

[27]  Markus Mueller,et al.  Power Conditioning of the Output from a Linear Vernier Hybrid Permanent Magnet Generator for using Direct Drive Wave Energy Converters , 2005 .

[28]  P.J. Randewijk.  Multi-Domain System Simulation and Rapid Prototyping of Digital Control Algorithms using VHDL-AMS , 2007, 2007 7th International Conference on Power Electronics and Drive Systems.

[29]  M. J. Kamper,et al.  Construction and control of an air-cored permanent magnet linear generator for direct drive wave energy converters , 2011, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[30]  M. Leijon,et al.  Flux Distribution in Linear Permanent-Magnet Synchronous Machines Including Longitudinal End Effects , 2007, IEEE Transactions on Magnetics.

[31]  Ozan Keysan,et al.  Design and Testing of a Linear Generator for Wave-Energy Applications , 2012, IEEE Transactions on Industrial Electronics.

[32]  A. von Jouanne,et al.  Design considerations for an inverter output filter to mitigate the effects of long motor leads in ASD applications , 1996, Proceedings of Applied Power Electronics Conference. APEC '96.

[33]  Paul P. Acarnley,et al.  Review of position-sensorless operation of brushless permanent-magnet machines , 2006, IEEE Transactions on Industrial Electronics.

[34]  H. Akagi,et al.  Attenuation of Conducted EMI Emissions From an Inverter-Driven Motor , 2008, IEEE Transactions on Power Electronics.

[35]  Ralph Kennel,et al.  Predictive control in power electronics and drives , 2008, 2008 IEEE International Symposium on Industrial Electronics.

[36]  M. Kamper,et al.  Design Aspects of a Novel Topology Air-Cored Permanent Magnet Linear Generator for Direct Drive Wave Energy Converters , 2012, IEEE Transactions on Industrial Electronics.