论文信息 - A simple method to design a compact and high performance wideband filter

A simple method to design a compact and high performance wideband filter

In this letter, a simple method to design a compact and high performance dual hooks wideband filter with open stubs is presented. By combining the coupled line section with two tapped open stubs, a wideband filter with wide stopband and very high passband selectivity is realized. This filter at center frequency f0 of 5.3 GHz has presented very good measured characteristics, including 3-dB fractional bandwidth of 85%, very low insertion loss of −0.5 ± 0.3 dB, wide stopband from 8 to 15 GHz, and very high selectivity near the passband edge. © 2007 Wiley Periodicals, Inc. Microwave Opt Technol Lett 49: 822–824, 2007; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/mop.22268

[1] W. Menzel,et al. Ultra-wideband bandpass filter with hybrid microstrip/CPW structure , 2005, IEEE Microwave and Wireless Components Letters.

[2] Albert Chin,et al. Study of parallel coupled‐line microstrip filter in broadband , 2006 .

[3] S. Sanyal,et al. Compact wideband bandpass filter , 2006, IEEE Microwave and Wireless Components Letters.

[4] Sang-Won Yun,et al. New compact bandpass filter using microstrip /spl lambda//4 resonators with open stub inverter , 2000 .

[5] J. Laskar,et al. A low phase noise X-band MMIC GaAs MESFET VCO , 2000 .

[6] Ching-Wen Hsue,et al. Wide-band equal-ripple filters in nonuniform transmission lines , 2002 .