Kinematic calibration of parallel mechanisms: a novel approach using legs observation

In this paper, a novel approach is proposed for the kinematic calibration of parallel mechanisms with linear actuators at the base. The originality of the approach lies in the observation of the mechanism legs with a camera, without any mechanism modification. The calibration can hence be achieved online, as no calibration device is linked to the end-effector, on any mechanism since no additional proprioceptive sensor installation is necessary. Because of the conditions of leg observability, several camera locations may be needed during the experimentation. The associated calibration method does not however require any accurate knowledge of the successive camera positions. The experimental procedure is therefore easy to perform. The method is developed theoretically in the context of mechanisms with legs linearly actuated at the base, giving the necessary conditions of identifiability. Application to an I4 mechanism is achieved with experimental results.

[1]  Aaas News,et al.  Book Reviews , 1893, Buffalo Medical and Surgical Journal.

[2]  David Daney.  Etalonnage geometrique des robots paralleles , 2000 .

[3]  Philippe Martinet,et al.  On Vision-based Kinematic Calibration of a Stewart-Gough Platform , 2004 .

[4]  Hanqi Zhuang,et al.  Camera-aided robot calibration , 1996 .

[5]  Jean-Pierre Merlet.  Force-feedback control of parallel manipulators , 1988, Proceedings. 1988 IEEE International Conference on Robotics and Automation.

[6]  Wisama Khalil,et al.  Self calibration of Stewart-Gough parallel robots without extra sensors , 1999, IEEE Trans. Robotics Autom..

[7]  Hanqi Zhuang,et al.  Self-calibration of parallel mechanisms with a case study on Stewart platforms , 1997, IEEE Trans. Robotics Autom..

[8]  David Daney.  Self Calibration of Gough Platform using leg mobility constraints , 1999 .

[9]  H. Pottmann,et al.  Approximation in Line Space — Applications in Robot Kinematics and Surface Reconstruction , 1998 .

[10]  O. Faugeras.  Three-dimensional computer vision: a geometric viewpoint , 1993 .

[11]  Wisama Khalil,et al.  Identifiable parameters for parallel robots kinematic calibration , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[12]  Etienne Burdet,et al.  Adaptive control of the Hexaglide, a 6 dof parallel manipulator , 1997, Proceedings of International Conference on Robotics and Automation.

[13]  Hanqi Zhuang,et al.  Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998, J. Field Robotics.

[14]  Damien Chablat,et al.  Architecture optimization of a 3-DOF translational parallel mechanism for machining applications, the orthoglide , 2003, IEEE Trans. Robotics Autom..

[15]  Jian Wang,et al.  On the accuracy of a Stewart platform. I. The effect of manufacturing tolerances , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[16]  Leila Notash,et al.  FIXTURELESS CALIBRATION OF PARALLEL MANIPULATORS , 1997 .

[17]  Philippe Martinet,et al.  Vision-based kinematic calibration of a H4 parallel mechanism , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[18]  Wisama Khalil,et al.  Autonomous Calibration of Parallel Robots , 1997 .

[19]  Michel Benoit,et al.  I4: A new parallel mechanism for Scara motions , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[20]  Lixin Liu,et al.  Self-calibration of a class of parallel manipulators , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[21]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .