Cross-phase Model-based Predictive Cavity Pressure Control in Injection Molding

The injection molding of thermoplastics is one of the most efficient manufacturing processes for autonomous manufacturing of plastic parts. The process is commonly divided into two main phases: the injection phase and the packing phase. During the injection phase the injection velocity is conventionally controlled. In contrast, the packing phase is pressure controlled. Due to the different control objectives within these two phases the control strategy is changed regarding a switch-over point, which leads to issues in process control. Therefore, a cross-phase control strategy is required which avoids the switch-over in order to optimize the process control strategy. In this contribution, a model-based predictive controller (MPC) is presented which considers the process behavior during the injection phase as well as the packing phase. Therefore, a physical-motivated model is developed for both phases. Afterwards, this model is continuously peace-wise linearized around the current operation point in each time instance. Furthermore, the measured signals are filtered and the required system states are estimated by an Extended Kalman Filter (EKF). Then, the presented approach is applied to a servo-electric injection molding machine in order to empirically validate the mentioned approach. The controller shows good tracking performance for both the injection phase and the packing phase.

[1]  Dirk Abel,et al.  Self-optimizing injection molding based on iterative learning cavity pressure control , 2017, Prod. Eng..

[2]  J. Lambert.  Numerical Methods for Ordinary Differential Equations , 1991 .

[3]  Thomas Werner Schmidt.  Zur Abschätzung der Schwindung , 1986 .

[4]  James B. Rawlings,et al.  Tutorial overview of model predictive control , 2000 .

[5]  Furong Gao,et al.  Multi-variable interaction analysis and a proposed quality control system for thermoplastics injection molding , 1997 .

[6]  Dirk Abel,et al.  A self-optimising injection moulding process with model-based control system parameterisation , 2016, Int. J. Comput. Integr. Manuf..

[7]  L. Turng,et al.  A review of current developments in process and quality control for injection molding , 2005 .

[8]  Dirk Abel,et al.  Model Predictive Feed Rate Control for a Milling Machine , 2016 .

[9]  Mohinder S. Grewal,et al.  Kalman Filtering: Theory and Practice Using MATLAB , 2001 .

[10]  G. G. Peters,et al.  Influence of cooling rate on pVT-data of semicrystalline polymers , 2001 .

[11]  Jan M. Maciejowski,et al.  Predictive control : with constraints , 2002 .

[12]  Christian Brecher,et al.  Integrative Production Technology—Theory and Applications , 2017 .

[13]  A. Bemporad,et al.  Model Predictive Control Design: New Trends and Tools , 2006, Proceedings of the 45th IEEE Conference on Decision and Control.

[14]  Andreas Kugi,et al.  Control-oriented modeling of servo-pump driven injection molding machines in the filling and packing phase , 2018 .

[15]  L. Biegler,et al.  Quadratic programming methods for reduced Hessian SQP , 1994 .