Boundary-Layer Transition Detection in a Cryogenic Wind Tunnel Using Luminescent Paint

A technique for boundary-layer transition detection in a cryogenic wind tunnel has been developed. This technique is based on the thermal quenching of luminescent molecules. Calibration results show that luminescence of the paint composed of ruthenium complex and silicone polymer is strongly sensitive to temperatures over the range of 90› 220 K. This capability allows one to visualize thermal signatures across the boundary-layer transition. A thin paint coating has been applied on three airfoil models with different thermal insulation properties. The paint was excited by a xenon light and the luminescence image was acquired using a high-resolution digital camera. To enhance the surface temperature signatures between laminar and turbulent regions, either the e ow or the model substrate was cooled or heated in an active manner. Transition patterns have been successfully visualized by processing the luminescent images. Boundary-layer transition has been detected by using this technique over a cryogenic temperature range of 90› 150 K in subsonic and transonic e ows.

[1]  Hiroshi Kanda,et al.  Surface pressure measurement in a cryogenic wind tunnel by using luminescent coating , 1997, ICIASF'97 Record. International Congress on Instrumentation in Aerospace Simulation Facilities.

[2]  Bryan Campbell,et al.  Temperature- and Pressure-Sensitive Luminescent Paints in Aerodynamics , 1997 .

[3]  R. E. Wright,et al.  Boundary-layer transition detection with infrared imaging emphasizing cryogenic applications , 1994 .

[4]  Bryan Campbell,et al.  Temperature sensitive fluorescent paint systems , 1994 .

[5]  J. Bell,et al.  Pressure-sensitive paint in aerodynamic testing , 1993 .

[6]  Bryan Campbell,et al.  Temperature Measurement Using Fluorescent Molecules , 1992 .

[7]  Tianshu Liu,et al.  Thermal paints for shock/boundary layer interaction in inlet flows , 1992 .

[8]  James Crowder,et al.  Infrared cameras for detection of boundary layer transition in transonic and subsonic wind tunnels , 1990 .

[9]  Robert A. Kilgore,et al.  High-Reynolds-Number Cryogenic Wind Tunnel , 1973 .

[10]  M. Goodyer,et al.  The high Reynolds number cryogenic wind tunnel , 1972 .

[11]  Tianshu Liu,et al.  Uncertainty Estimates for Temperature-Sensitive Paint Measurements with Charge-Coupled Device Cameras , 1998 .

[12]  B. G. McLachlan,et al.  Boundary layer transition detection by luminescence imaging , 1993 .

[13]  Robert E. Wright,et al.  Transition detection studies in the cryogenic environment , 1990 .

[14]  Purnell Hopson,et al.  Status of a specialized boundary layer transition detection system for use in the U.S. National Transonic Facility , 1987 .

[15]  P. Stainback,et al.  A transition detection study using a cryogenic hot film system in the Langley 0.3-meter transonic cryogenic tunnel , 1987 .