Life cycle assessment of optimised chemical looping air separation systems for electricity production

Abstract Chemical looping air separation (CLAS) is as a very promising technology for the production of pure oxygen through the cyclic reduction and oxidation of a solid material at elevated temperatures. This study focused on the environmental potential of electricity and CO2 production through oxyfuel combustion of lignite. First, an attributional LCA assessed the operations which mainly contribute to the total environmental impacts for two different scenarios at the limits of the operating window (100% and 25% active material). Then, this study analysed the potential of electricity and pure CO2 production through CLAS when compared with conventional power production technologies from renewable and fossil alternatives, including electricity from hydro power, electricity from wind power, electricity from nuclear, electricity from photovoltaic, electricity from biogas, electricity from biomass, electricity from waste, electricity from hard coal and electricity from natural gas. Overall the results, analysed per MJ of electricity produced, showed how the chemical looping technology consistently performs better than the other technologies, especially thanks to the recovery of the pure CO2 stream used for industrial purposes, which avoids the production of CO2 from fossil resources. However, the cleaning of the flue gas of the oxyfuel combusted lignite strongly limits the toxicities indicators.

[1]  Reinout Heijungs,et al.  Allocation and 'what-if' scenarios in life cycle assessment of waste management systems. , 2007, Waste management.

[2]  Juan Adánez,et al.  Progress in chemical-looping combustion and reforming technologies , 2012 .

[3]  M. Hauschild,et al.  Environmental Assessment of Products: Volume 2: Scientific Background , 1997 .

[4]  Roland Clift,et al.  Sustainable development and its implications for chemical engineering , 2006 .

[5]  Bo G Leckner,et al.  A 1000 MWth boiler for chemical-looping combustion of solid fuels – Discussion of design and costs , 2015 .

[6]  Wilhelm Kuckshinrichs,et al.  Environmental assessment of German electricity generation from coal-fired power plants with amine-based carbon capture , 2009 .

[7]  Garry D. Hayman,et al.  Photochemical ozone creation potentials for oxygenated volatile organic compounds: sensitivity to variations in kinetic and mechanistic parameters , 1999 .

[8]  A. McMichael,et al.  Globalization, climate change, and human health. , 2013, The New England journal of medicine.

[9]  Paul Ekins,et al.  Life cycle assessment of future electric and hybrid vehicles: A cradle-to-grave systems engineering approach , 2016 .

[10]  Wenqian Xu,et al.  Oxygen storage properties of La1-xSrxFeO3-δ for chemical-looping reactions–An in-situ neutron and synchrotron X-ray study , 2016 .

[11]  Corinne Le Quéré,et al.  Climate Change 2013: The Physical Science Basis , 2013 .

[12]  Göran Finnveden,et al.  Allocation in ISO 14041—a critical review , 2001 .

[13]  Eric Johnson.  Handbook on Life Cycle Assessment Operational Guide to the ISO Standards , 2003 .

[14]  Makoto Akai,et al.  Life-cycle analysis of a fossil-fuel power plant with CO2 recovery and a sequestering system , 1997 .

[15]  Lidia Lombardi,et al.  Life cycle assessment comparison of technical solutions for CO2 emissions reduction in power generation , 2003 .

[16]  Roland Clift,et al.  The application of Life Cycle Assessment to Integrated Solid Waste Management - Part 1 - Methodology , 2000 .

[17]  Andrea Schreiber,et al.  Environmental evaluation of CCS using Life Cycle Assessment–A synthesis report , 2011 .

[18]  Henrikke Baumann,et al.  The hitch hiker's guide to LCA : an orientation in life cycle assessment methodology and application , 2004 .

[19]  K. Shah,et al.  Integration options for novel chemical looping air separation (ICLAS) process for oxygen production in oxy-fuel coal fired power plants , 2013 .

[20]  Manfred Fischedick,et al.  Comparison of carbon capture and storage with renewable energy technologies regarding structural, economic, and ecological aspects in Germany , 2007 .

[21]  Behdad Moghtaderi,et al.  An overview on oxyfuel coal combustion—State of the art research and technology development , 2009 .

[22]  Mark A. J. Huijbregts,et al.  USEtox—the UNEP-SETAC toxicity model: recommended characterisation factors for human toxicity and freshwater ecotoxicity in life cycle impact assessment , 2008 .

[23]  Anna Björklund,et al.  Life cycle assessment of fuels for district heating: A comparison of waste incineration, biomass- and natural gas combustion , 2007 .

[24]  M. Eckelman,et al.  Life Cycle Assessment of Metals: A Scientific Synthesis , 2014, PloS one.

[25]  Chao Fu,et al.  Exergy Analysis and Heat Integration of a Coal-Based Oxy-combustion Power Plant , 2013 .

[26]  P. A. Jensen,et al.  Oxy-fuel combustion of solid fuels , 2010 .

[27]  Martin J. Downie,et al.  The effect of CO2 purity on the development of pipeline networks for carbon capture and storage schemes , 2014 .

[28]  Göran Finnveden,et al.  The Application of Life Cycle Assessment to Integrated Solid Waste Management: Part 2—Perspectives on Energy and Material Recovery from Paper , 2000 .

[29]  B. Moghtaderi.  Application of Chemical Looping Concept for Air Separation at High Temperatures , 2010 .

[30]  Manfredi Simone,et al.  Supporting Environmentally Sound Decisions for Waste Management - A technical guide to Life Cycle Thinking (LCT) and Life Cycle Assessment (LCA) for waste experts and LCA practitioners , 2011 .

[31]  Martin Pehnt,et al.  Life cycle assessment of carbon dioxide capture and storage from lignite power plants , 2009 .

[32]  Juan Adánez,et al.  Solid waste management of a chemical-looping combustion plant using Cu-based oxygen carriers. , 2007, Environmental science & technology.