Health monitoring of bolted joints via electrical conductivity measurements

The use of electrical resistance as a diagnostic parameter in structural health monitoring of bolted joints is discussed in the paper. The proposed method is based on the phenomenon that the electrical constriction resistance of the rough contact interface between two conductive members clamped by a bolt is a sensitive indicator of bolted joint integrity. A simple formula for relationship between relative electrical conductance changes and relative tightening torque changes is analytically obtained. Based on this formula, a methodology is described for detecting a loosening failure of conductive bolted joints.

[1]  E. Marschall,et al.  Thermal contact resistance across pressed metal contacts in a vacuum environment , 1992 .

[2]  M. Cooper,et al.  Thermal contact conductance , 1969 .

[3]  Daniel J. Inman,et al.  Smart bolts: An example of self-healing structures , 2001 .

[4]  Interface pressure distributions and thermal contact resistance of a bolted joint , 2005, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[5]  Michael D. Todd,et al.  An assessment of modal property effectiveness in detecting bolted joint degradation: theory and experiment , 2004 .

[6]  N. B. Demkin,et al.  Contact area of rough surfaces , 1960 .

[7]  B. Mikic,et al.  THERMAL CONTACT CONDUCTANCE; THEORETICAL CONSIDERATIONS , 1974 .

[8]  Suresh V. Garimella,et al.  An experimentally validated thermo-mechanical model for the prediction of thermal contact conductance , 2005 .

[9]  Elasticity-conductivity connections for contacting rough surfaces : An overview , 2009 .

[10]  Hiroyuki Kumano,et al.  The contact stress in a bolted joint with a threaded bolt , 1996 .

[11]  Merhyle Franklin Spotts.  Design of machine elements , 1948 .

[12]  Daniel J. Inman,et al.  Practical issues of activating self-repairing bolted joints , 2004 .

[13]  S. Probert,et al.  Thermal resistances of pressed contacts , 1986 .

[14]  Keith Worden,et al.  An introduction to structural health monitoring , 2007, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[15]  Joseph Edward Shigley,et al.  Mechanical engineering design , 1972 .

[16]  Igorʹ Viktorovich Kragelʹskiĭ,et al.  Tribology : lubrication, friction, and wear , 2001 .

[17]  K. Nishino,et al.  Thermal contact conductance under low applied load in a vacuum environment , 1995 .

[18]  A. Todoroki,et al.  Strain and Damage Monitoring of CFRP Laminates by Means of Electrical Resistance Measurement , 2007 .

[19]  Sayed A. Nassar,et al.  Torque-Angle Formulation of Threaded Fastener Tightening , 2008 .

[20]  A. W. Bush,et al.  A theoretical investigation of thermal contact conductance , 1979 .

[21]  C. Wen,et al.  An experimental investigation of thermal contact conductance across bolted joints , 2001 .

[22]  Charbel Antonios,et al.  Experimental and Theoretical Behavior of Self-healing Bolted Joints , 2006 .

[23]  P. Nayak,et al.  Random Process Model of Rough Surfaces , 1971 .

[24]  Antonia Papandreou-Suppappola,et al.  Damage Classification Structural Health Monitoring in Bolted Structures Using Time-frequency Techniques , 2009 .

[25]  K. Chandrashekhara,et al.  Stresses in a thick plate with a circular hole under axisymmetric loading , 1977 .

[26]  Braunovic Milenko,et al.  Reliability of power connections , 2007 .

[27]  Yozo Fujino,et al.  Quantitative health monitoring of bolted joints using a piezoceramic actuator-sensor , 2004 .

[28]  Nabil Motosh.  Determination of Joint Stiffness in Bolted Connections , 1976 .

[29]  Daniel J. Inman,et al.  Improving Accessibility of the Impedance-Based Structural Health Monitoring Method , 2004 .

[30]  Sayed A. Nassar,et al.  Thread Friction Torque in Bolted Joints , 2005 .

[31]  Sayed A. Nassar,et al.  Formulation of Elastic Interaction Between Bolts During the Tightening of Flat-Face Gasketed Joints , 2009 .

[32]  D. Goswami,et al.  Prediction of Thermal Contact Conductance in Vacuum by Statistical Mechanics , 1998 .

[33]  Hideo Kobayashi,et al.  Application of Electric Resistance Change Method to Damage Detection of CFRP Bolted Joints , 2005 .

[34]  Correlations for Thermal Contact Conductance In Vacuo , 1972 .

[35]  Majid Bahrami,et al.  Review of Thermal Joint Resistance Models for Nonconforming Rough Surfaces , 2006 .