An experimental investigation into the noise characteristics of a dual-stream jet with four airfoils inserted in the fan nozzle was conducted. The intent of the airfoils was to deflect the fan stream relative to the core stream and, therefore, impact the development of the secondary potential core and noise radiated in the peak jet-noise direction. The experiments used a full-factorial Design of Experiments (DoE) approach to identify parameters and parameter interactions impacting noise radiation at two azimuthal microphone array locations, one of which represented a sideline viewing angle. The parameters studied included airfoil angle-of-attack, airfoil azimuthal location within the fan nozzle, and airfoil axial location relative to the fan-nozzle trailing edge. Jet conditions included subsonic and supersonic fan-stream Mach numbers. Heated jets conditions were simulated with a mixture of helium and air to replicate the exhaust velocity and density of the hot jets. The introduction of the airfoils was shown to impact noise radiated at polar angles in peak-jet noise direction and to have no impact on noise radiated at small and broadside polar angles and to have no impact on broadband-shock-associated noise. The DoE analysis showed the main effects impacting noise radiation at sideline-azimuthal-viewing angles included airfoil azimuthal angle for the airfoils on the lower side of the jet near the sideline array and airfoil trailing edge distance (with airfoils located at the nozzle trailing edge produced the lowest sound pressure levels). For an array located directly beneath the jet (and on the side of the jet from which the fan stream was deflected), the main effects impacting noise radiation included airfoil angle-of-attack and airfoil azimuthal angle for the airfoils located on the observation side of the jet as well and trailing edge distance. Interaction terms between multiple configuration parameters were shown to have significant impact on the radiated noise. The models were shown to adequately describe the sound-pressure levels obtained for a configuration in the center of the design space indicating the models can be used to navigate the design space.
[1]
James Bridges,et al.
An MDOE Assessment of Nozzle Vanes for High Bypass Ratio Jet Noise Reduction
,
2006
.
[2]
J. Laufer,et al.
Experiments on Supersonic Jet Noise
,
1976
.
[3]
Dimitri Papamoschou,et al.
JET NOISE SUPPRESSION WITH FAN FLOW DEFLECTORS IN REALISTIC-SHAPED NOZZLE
,
2005
.
[4]
Dimitri Papamoschou,et al.
New Method for Jet Noise Reduction in Turbofan Engines
,
2002
.
[5]
Dimitri Papamoschou,et al.
Acoustic Simulation of Coaxial Hot Air Jets Using Cold Helium-Air Mixture Jets
,
2007
.
[6]
Christopher K. W. Tam,et al.
Jet Noise: Since 1952
,
1998
.
[7]
Dimitri Papamoschou,et al.
Computation of High-Speed Coaxial Jets with Fan Flow Deflection
,
2010
.
[8]
Dimitri Papamoschou,et al.
Modeling of Noise Reduction for Turbulent Jets with Ind uced Asymmetry
,
2012
.
[9]
Dimitri Papamoschou.
PARAMETRIC STUDY OF FAN FLOW DEFLECTORS FOR JET NOISE SUPPRESSION
,
2005
.
[10]
Christopher K. W. Tam,et al.
Stochastic model theory of broadband shock associated noise from supersonic jets
,
1987
.
[11]
Feng Liu,et al.
Aerodynamic and Acoustic Optimization for Fan Flow Deflection
,
2011
.