A deformable tetrahedron rolling mechanism (DTRM) based on URU branch

Abstract The purpose of this paper is to put forward a novel deformable tetrahedron rolling mechanism (DTRM). This new reconfigurable mobile mechanism with the external tetrahedral shape can be regarded as a parallel mechanism with a variable platform, that is constructed by four vertices and six edges corresponding to four platforms and six URU chains. Mechanical design is introduced, and the degree of freedom (DOF) is analyzed. Equivalent planar mechanism analysis method is proposed for the symmetrical mechanical structure to simplify the theoretical analysis process. Based on the symmetric-drive rolling locomotion, impact and non-impact rolling gait are planned, respectively corresponding to different joints workspace, to reduce the displacement error. Aiming at non-impact rolling gait, the motion strategy is established instead of moving with pre-set driving parameters, as the basis of the control system. Then a trajectory optimization of the center of mass (CM) based on actuator torque analysis is carried out to reduce the actuator torque. To verify the rolling locomotion, we present the results of a series of experiments, performed on a manufactured prototype.

[1]  Qianqian Zhang,et al.  Design and locomotivity analysis of a novel deformable two-wheel-like mobile mechanism , 2020, Ind. Robot.

[2]  Chunyan Zhang,et al.  A New Mathematical Method to Study the Singularity of 3-RSR Multimode Mobile Parallel Mechanism , 2019, Mathematical Problems in Engineering.

[3]  Yujin Wang,et al.  Trajectory planning of a rolling robot of closed five-bow-shaped-bar linkage , 2018, Robotics and Computer-Integrated Manufacturing.

[4]  Y. Takeda,et al.  Kinematic Analysis and Synthesis of a 3-URU Pure Rotational Parallel Mechanism with Respect to Singularity and Workspace , 2007 .

[5]  Ran Liu,et al.  A novel serial–parallel hybrid worm-like robot with multi-mode undulatory locomotion , 2019 .

[6]  Shinichi Hirai,et al.  Crawling and Jumping by a Deformable Robot , 2006, Int. J. Robotics Res..

[7]  L. Wendt,et al.  Gait Design and Modeling of a 12-Tetrahedron Walker Robot , 2007 .

[8]  Jian S. Dai,et al.  A Sarrus-like overconstrained eight-bar linkage and its associated Fulleroid-like platonic deployable mechanisms , 2018, Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science.

[9]  Yan-An Yao,et al.  Dynamic rolling analysis of triangular-bipyramid robot , 2014, Robotica.

[10]  Arthur C. Sanderson,et al.  Dynamic rolling locomotion and control of modular robots , 2002, IEEE Trans. Robotics Autom..

[11]  Sergey Levine,et al.  Deep reinforcement learning for tensegrity robot locomotion , 2016, 2017 IEEE International Conference on Robotics and Automation (ICRA).

[12]  Li Yezhu.  Locomotion analysis and design of a triangular bipyramid rolling mechanism with two modes , 2014 .

[13]  Xianwen Kong,et al.  Type Synthesis of 3-DOF Multi-Mode Translational/Spherical Parallel Mechanisms with Lockable Joints , 2016 .

[14]  Peter Doorn,et al.  Modeling and gait design of a 6-tetrahedron walker robot , 2010, 2010 42nd Southeastern Symposium on System Theory (SSST).

[15]  L. Wendt,et al.  Construction and Control of a 4-Tetrahedron Walker Robot , 2008, 2008 40th Southeastern Symposium on System Theory (SSST).

[16]  Pamela Elizabeth Clark,et al.  Tetrahedral Robotics for Space Exploration , 2007 .

[17]  Dan Zhang,et al.  A reconfigurable multi-mode mobile parallel robot , 2017 .

[18]  Yezhuo Li.  Foldable Triangular Bipyramid Rolling Mechanism , 2014 .

[19]  Ran Liu,et al.  Locomotion Optimization and Manipulation Planning of a Tetrahedron-Based Mobile Mechanism with Binary Control , 2018 .

[20]  Jian S. Dai,et al.  Design and kinematic analysis of a novel prism deployable mechanism , 2013 .

[21]  Mark Yim,et al.  New locomotion gaits , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[22]  Xianwen Kong,et al.  A class of reconfigurable deployable platonic mechanisms , 2016 .

[23]  Wenhui Zhang.  Adaptive Compensation Control for Ground Simulation Equipment of Space Microgravity Environment Base on Neural Sliding-model , 2014 .

[24]  Yan-an Yao,et al.  An Omnidirectional Rolling 8U Parallel Mechanism , 2012 .

[25]  Rhodri H. Armour,et al.  Rolling in nature and robotics: A review , 2006 .

[26]  He Yanying,et al.  Design and analysis of a multi-mode mobile robot based on a parallel mechanism with branch variation , 2018, Mechanism and Machine Theory.

[27]  Yibin Li,et al.  Design and Analysis of a Sixteen-Legged Vehicle With Reconfigurable Close-Chain Leg Mechanisms , 2019 .

[28]  Shinichi Hirai,et al.  Rolling Locomotion of Deformable Tensegrity Structure , 2009 .

[29]  Mark Yim,et al.  Optimization-Based Nonimpact Rolling Locomotion of a Variable Geometry Truss , 2019, IEEE Robotics and Automation Letters.

[30]  Xiangzhi Wei,et al.  Design and locomotion analysis of a novel modular rolling robot , 2019, Mechanism and Machine Theory.

[31]  Zhiyuan Xun.  Three Spatial-crossed Parallelograms Rolling Mechanism , 2015 .

[32]  S. Cai,et al.  A Light‐Powered Ultralight Tensegrity Robot with High Deformability and Load Capacity , 2018, Advanced materials.

[33]  Xiaoping Liu,et al.  A novel rhombohedron rolling mechanism , 2016 .

[34]  Yan-An Yao,et al.  An agile assistant robot integrating operation and rolling locomotion , 2017, Ind. Robot.

[35]  David Zarrouk,et al.  A Minimally Actuated Reconfigurable Continuous Track Robot , 2020, IEEE Robotics and Automation Letters.

[36]  Walter F. Truszkowski,et al.  BEES for ANTS: Space Mission Applications for the Autonomous NanoTechnology Swarm , 2004 .

[37]  Shusheng Bi,et al.  Design and motion analysis of tetrahedral rolling robot , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.