Current challenges and opportunities for EUV lithography

The semiconductor industry is on the threshold of using extreme ultraviolet (EUV) lithography in high volume manufacturing (HVM). Nevertheless, there are several areas where improvement in this lithographic technology would be very beneficial, most notably exposure tool reliability (particularly the light source) and mask contamination. These areas have important consequences for productivity. Future generations of EUV lithography are expected, but there are several challenges to be overcome, particularly in the areas of resists and computational lithography. A replacement for chemically amplified resists may be required. Regardless of resist type, exposure doses must be sufficiently high to prevent photon shot noise from causing high levels of yield loss. Computational lithography for next generation EUV lithography will be very complex.

[1]  Hiroo Kinoshita,et al.  EUV Lithography: An Historical Perspective , 2008 .

[2]  T. E. Zavecz,et al.  Glass Wafer Processing And Inspection For Qualification Of Reticles In A Fineline Wafer Stepper Production Facility , 1985, Advanced Lithography.

[3]  Peter J. Silverman,et al.  EUVL: transition from research to commercialization , 2003, Photomask Japan.

[4]  Kenneth A. Goldberg,et al.  Experimental measurements of telecentricity errors in high-numerical-aperture extreme ultraviolet mask images , 2014 .

[5]  Steven G. Hansen,et al.  Photoresist and stochastic modeling , 2018 .

[6]  Peter De Bisschop,et al.  Stochastic effects in EUV lithography: random, local CD variability, and printing failures , 2017 .

[7]  Yasin Ekinci,et al.  Absorption coefficient of metal-containing photoresists in the extreme ultraviolet , 2018 .

[8]  Chao Fang,et al.  Optimization of a virtual EUV photoresist for the trade-off between throughput and CDU , 2013, Advanced Lithography.

[9]  Igor V. Cymer Llc Fomenkov,et al.  EUV Sources for High-Volume Manufacturing , 2018 .

[10]  Gerard Michael Schmid.  Understanding molecular scale effects during photoresist processing , 2003 .

[11]  Stephen Hsu,et al.  Application of EUV resolution enhancement techniques (RET) to optimize and extend single exposure bi-directional patterning for 7nm and beyond logic designs , 2016, SPIE Advanced Lithography.

[12]  Jo Finders,et al.  EUV source optimization driven by fundamental diffraction considerations , 2017, Photomask Technology.

[13]  Pei-yang Yan,et al.  Understanding Bossung curve asymmetry and focus shift effect in EUV lithography , 2002, SPIE Photomask Technology.

[14]  Jae Uk Lee,et al.  Properties and performance of EUVL pellicle membranes , 2015, SPIE Photomask Technology.

[15]  Gregg M. Gallatin.  Resist blur and line edge roughness (Invited Paper) , 2004, SPIE Advanced Lithography.

[16]  Jo Finders,et al.  Illumination pupil optimization in 0.33-NA extreme ultraviolet lithography by intensity balancing for semi-isolated dark field two-bar M1 building blocks , 2016 .

[17]  Harry J. Levinson,et al.  Principles of Lithography , 2001 .

[18]  Charles H. Stapper,et al.  Modeling of Integrated Circuit Defect Sensitivities , 1983, IBM J. Res. Dev..

[19]  John Zimmerman,et al.  Progress on EUV pellicle development , 2014, Advanced Lithography.

[20]  Ted Liang,et al.  EUV progress toward HVM readiness , 2016, SPIE Advanced Lithography.